Used Back Hoe Loader for sale (6,933)

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Fedpfx Alsz Ed Azs Uepn Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear Fjdpfx Aez Engkol Uepn - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2020, Due to the large number of unserious emails, not all emails will be answered. WhatsApp RX 70-35 Diesel Hybrid, year of manufacture 2020, ready to drive RX 70-35 Gas, year of manufacture 2020, ready to drive Fedpoz Edv Isfx Al Uepn RX 70-35 Gas, year of manufacture 2020, for spare parts RX 70-45 Gas, year of manufacture 2020, for spare parts RX 70-70 Diesel-Hybrid, year of manufacture 2018, for spare parts "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket * Fork * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM Fedpfx Asz E Uhujl Uopn

Condition: used, Year of construction: 2016, operating hours: 3,454 h, Equipment: all wheel drive, * enclosed cab * quick-change coupling * bucket * forks * rotating beacon ----Vehicle number: 12487----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. Fpedpjz E Uilsfx Al Ujn ?YOUR VTS TEAM

Condition: used, power: 157 kW (213.46 HP), machine/vehicle number: CATIT62HEM5G00603, In working order. Fpodpfx Aovwbd Tol Uen

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm Fpedpfx Ajz Ec Trol Ujn * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. Fodpfez E Nh Nox Al Uepn The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: new, Year of construction: 2026, ‼️ROAD PERMIT* Josan – the VALUE-FOR-MONEY LOADER Robust, reliable and affordable – without unnecessary frills. Simple, easy-to-maintain technology without computers or complicated electronics. Our wheel loaders are powder-coated instead of just painted – a clear advantage against rust and de-icing salt. Whether in the forest, agriculture, equestrian farm, construction site or commercial use: the all-purpose loader is versatile and available with around 20 different attachments! ‼️ Feel free to watch our videos on our website S22 Value-for-Money Loader means: Standard equipment ⚙️ OUR COMPONENTS ✅ FREE DELIVERY throughout Germany to your yard! ✅ Road permit* from TÜV SÜD – available only from us! Fpjdpfezf H Sbjx Al Usn ✅ TÜV SÜD Certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! From the same supplier that sells to high-priced wheel loader manufacturers. This allows for sensitive and precise raising and lowering of the pallet forks. Feel free to test it on our yard. ✅ POWDER-COATED! Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc. are processed in this way. This means extreme rust protection is INCLUDED! ✅ NEW! Larger luxury cab with reinforced steel, so we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SPRUNG COMFORT SEAT adjustable to your weight ✅ LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg incl. bucket ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Service throughout Germany by professionals in our own workshop ✅ Spare parts warehouse in Gemmrigheim. This means we can send parts within 24 hours ✅ Own factory in China ✅ High quality through continuous controls during the production process ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe) Technical data: ➡️ Weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): 4500 x 1300 x 2550 mm ➡️ Tipping height 2.83m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engine ➡️ Articulated steering with oscillating axle ➡️ Comfort cab ➡️ Bucket 0.6 m³ ➡️ Hydraulic oil cooler ➡️ Cab and windshield can be heated with a fan ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ Additional control levers ➡️ Automatic selection of low and high gear ➡️ 2-stage torque converter transmission, electrically controlled ➡️ UVV NEW 1 year Optional: ➡️ Road permit ➡️ Reversing camera ➡️ Air-sprung comfort seat and retractable safety belt ➡️ Electric joystick for moving forward and backward with your thumb on the joystick ➡️ Tires as shown in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ 3rd & 4th control circuits with separate small joysticks ➡️ Floating function ➡️ Stainless steel exhaust ➡️ Combined pallet fork with attachment and tines ➡️ Euro attachment with hydraulic locking pins Net price €10,499.00 +19% VAT €1,994.81 Gross price €12,493.81 Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty conditions. Pictures/text and equipment may vary. Subject to errors.

Condition: used, functionality: fully functional, machine/vehicle number: JU3413, Year of construction: 2002, operating hours: 12,760 h, load capacity: 7,000 kg, lifting height: 3,920 mm, free lift: 365 mm, load center: 700 mm, fuel type: diesel, construction height: 2,830 mm, motor manufacturer: Perkins, DGUV certified until: 11/2026, fork carriage width: 260 mm, fork length: 1,380 mm, front tire size: SE300-15, rear tire size: SE300-15, empty load weight: 9,900 kg, total height: 2,830 mm, total length: 5,100 mm, total width: 2,350 mm, color: red, Equipment: CE marking, lighting, sideshift, Forklift Jumbo J/SH/14/50; No. JU3413, year of manufacture 2002; tires SE 3.00-15; platform width 1,400 mm; platform height 1,150 mm; Fpodpfx Aez D Aacsl Ujn overall height – structural height: 2,850 mm; width 2,350 mm, length 5,100 mm, mast height: 2,830 mm, lifting height 3,920 mm, free lift 365 mm, forks: 260 x 50 x 1400 mm; load capacity 7,000 kg / load center 700 mm, engine: Perkins diesel, approx. 12,760 operating hours – may change slightly as the vehicle is still in use; fork positioner, full cabin. Sale without guarantee and without warranty; Vehicle sale ex works – must be picked up by the buyer; Inspection and test drive are possible by appointment.

Condition: used, functionality: fully functional, power: 42.5 kW (57.78 HP), fuel type: diesel, operation weight: 600 kg, axle configuration: 2 axles, Year of construction: 1997, operating hours: 11,900 h, Equipment: cabin, pallet forks, quick-change device, standard shovel, Zettelmeyer ZL602C wheel loader Year of manufacture: 1997 11,900 operating hours Fedpfxez Hc E Ro Al Ujpn 42.5 kW Deutz engine, 4 cylinders Approx. 6,000 kg Fork + bucket + quick coupler

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 10,059 h, load capacity: 3,600 kg, lifting height: 5,500 mm, free lift: 2,420 mm, fuel type: gas, mast type: duplex, construction height: 3,750 mm, fork carriage width: 3,500 mm, empty load weight: 6,260 kg, total length: 3,300 mm, drive type: Treibgas, construction width: 2,150 mm, Four-way side loader Load center: 600 ISO class: FEM 3 Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Solid tires Front tire size: 2 x 16x7-10.5 Fpedpfx Ajz Ifn Rel Uon Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 1 x 23x10-12 Rear tire condition: 60 - 80% Battery year of manufacture: 2014 Additional single hydraulic circuit, 5th valve, integrated fork adjustment, load-handling forks 1100-2000mm, 3 front work lights, 2 rear work lights.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,449 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,250 mm, fork length: 1,400 mm, empty load weight: 7,300 kg, total length: 2,750 mm, drive type: Diesel, construction width: 2,250 mm, opening width: 1,340 mm, Four-way reach truck Mast type: Triplex Fpodpoz Ifpzjfx Al Uon Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 1 x 250-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2014 Additional single auxiliary hydraulics, fork positioner, fully enclosed cabin with heater, 2 work lights at the front, 1 work light at the rear.

Condition: used, maximum load weight: 8,680 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2016, next inspection (TÜV): 10/2028, Year of construction: 2016, Internal vehicle number: G400182 Available immediately at our location in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Fpsdpez Amvnefx Al Uen

Condition: used, Year of construction: 2020, operating hours: 915 h, Equipment: all wheel drive, MAKE: GIANT TYPE: D254SW YEAR: 2020 CE MARKED: YES OPERATING HOURS: 915 HOURS Fpsdpfozlv Nvjx Al Uon TIRES/UNDERCARRIAGE: 80% POWER: 18KW ENGINE: KUBOTA D902 WEIGHT: 1100 KG OPTIONS: 1100 KG MACHINE WEIGHT HYDRAULIC QUICK HITCH NEW BUCKET PALLET FORKS EXTRA FUNCTION 3-CYLINDER KUBOTA ENGINE 1150 KG LIFTING CAPACITY AS NEW KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: B/60322, operating hours: 7,011 h, lifting height: 5,000 mm, load center: 600 mm, fuel type: diesel, fork carriage width: 180 mm, fork length: 1,800 mm, empty load weight: 14,820 kg, Equipment: cabin, head guard, The forklift is operational but has not been demonstrated. Fjdez Hwqzepfx Al Uepn

Condition: used, Year of construction: 2025, operating hours: 20 h, Attachment 1 (manufacturer, cutting width, etc.): 3000mm bucket Automatic lubrication system -> Auto-lubrication system: Yes Operating weight: 29000 Emissions class: Emissions Class 5 EPA certification: Yes Maximum speed: 40 Lift arm kinematics: Z-kinematics Air conditioning: Yes Engine: Liebherr D 936 A7 Tire brand: Bridgestone Reversing warning device: Acoustic reversing warning device with camera Rotating beacon: Yes Quick coupler: none Reversing fan: Yes Weighing system type: Liebherr Loadtronic Additional headlights: front + rear Condition of rear tires: like new Condition of front tires: like new Visual condition: like new Fpsdpoz H Htfsfx Al Usn Technical condition: like new -1 ---- Tires: Bridgestone VJT L3 26.5R25EM Lift arm (Z-kinematics) 3050mm Integrated tire pressure monitoring system Incl. bucket Location: Passau

Condition: used, Year of construction: 2023, operating hours: 272 h, fuel type: electric, power: 13 kW (17.68 HP), tire condition: 80 %, empty load weight: 3,094 kg, color: grey, mileage: 272 km, first registration: 06/2023, axle configuration: 2 axles, next inspection (TÜV): 11/2026, driver cabin: day cab, emission class: none, Equipment: cabin, sliding door, truck registration, Reference no. for inquiries: 40486 Still RX20-20P * Year of manufacture: 2023 * Enclosed cab * Power steering * Lift height: over 5000 mm * Overall height: 2001 - 5000 mm * Inspections: General (HU) / Emissions (AU) valid until 11/2026 * Unladen weight: 3,094 kg * Mast height: 2,850 mm * Maximum lift height: 6,880 mm * Free lift: 2,400 mm * Operating hours: 272.3 h * Fork length: 1,200 mm * Side shifter Disclaimer: Subject to prior sale, changes, and errors. Further photos and videos are available on our website. Our comprehensive service offering includes, for example: Fodjydu Dqspfx Al Ujpn * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Application for all (export) documentation * Procurement of export or customs license plates * Vehicle preparation: new tarpaulins, signage, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Delivery/transport of commercial vehicles Consult our trained specialist staff – we are happy to advise you.

Condition: used, empty load weight: 11,360 kg, maximum load weight: 42,840 kg, overall weight: 54,200 kg, axle configuration: > 3 axles, first registration: 10/2022, suspension: air, tire size: 245/70 17,5, tire condition: 40 %, wheelbase: 1,310 mm, color: black, Year of construction: 2022, front tire size: 245/70 17,5, rear tire size: 245/70 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, hydraulic winch * Warntafel * Length 13615 to 18315mm * 4.7 meters telescopic * hydraulically lowerable Eco ramp * widenable Disclaimer: Subject to changes, prior sale and errors. Fpedpfx Aezxa E Iel Uon You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 3,790 kg, maximum load weight: 9,210 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 09/2007, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 400 mm, loading space volume: 6 m³, total length: 6,200 mm, suspension: parabolic leaf (spring), tire size: 205/65 17,5, tire condition: 30 %, wheelbase: 1,010 mm, color: orange, Year of construction: 2007, front tire size: 205/65 17,5, rear tire size: 205/65 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 2315 Wellmeyer, Heinrich, low-bed trailer * Year of manufacture: 2007 * ABS, Anti-lock Braking System * Air coupling, Duomatik type * Suspension: Leaf spring * Gross vehicle weight: 13,000 kg * Unladen weight: 3,790 kg * Payload: 9,210 kg Fpodpfx Alozwt Adj Uon * Permissible gross vehicle weight: 13,000 kg * Tire condition 1st axle: 30%|30% -- 30%|30% - Tire size: 205/65 R17.5 * Tire condition 2nd axle: 30%|40% -- 40%|30% - Tire size: 205/65 R17.5 * Wheelbase: 1010 mm * Tire sizes: 205/65 R17.5 * Internal dimensions: L = 6200 mm, W = 2450 mm, H = 400 mm * Internal volume*: 6 m³ * Pallet spaces: 15 * 40 mm drawbar eye * Hydraulic ramps * Steel floor with tie-down points * Ramp length approx. 2400 mm Disclaimer: Subject to changes, prior sale, and errors. You can find more photos and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Processing of all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg Fsdpfx Aloyib Ahs Uopn * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: used, power: 37 kW (50.31 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 4,700 kg, empty load weight: 4,260 kg, maximum load weight: 440 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2000, brakes: other, Year of construction: 2000, operating hours: 6,320 h, driver cabin: day cab, wheelbase: 1,950 mm, Equipment: additional headlights, all wheel drive, cabin, pallet forks, * German machine * 6,320 operating hours * All-wheel drive * Condition: see photos Fsdpfxozcbumo Al Uopn * Articulated Komatsu WA 63 - 3 * Turning radius 3,640 mm * Articulation angle 40° * Hydraulic 4-point quick coupler * Loading bucket 0.7 m³ - bucket width 1,850 mm * Bucket pivot height 3,115 mm * Planetary axles with automatic differential locks on both axles * EasyDrive (Hydrostatic drive) (SN) * 1st speed range 0 - 5.6 km/h - 2nd speed range 0 - 20 km/h * Hydrostatic steering * Working pressure 200 bar hydraulic * Power-assisted hydraulic controls * Towing hitch * ROPS and FOPS comfort cab * Double-door safety cab according to DIN/ISO * Easy operation via multi-function lever * Comfort driver's seat * Delta lift arm * Sliding window on the right * Heater * Heated rear window * All-around glazing * Optimal noise insulation * Engine: Komatsu Type Komatsu 4D 94E - 37 kW - 2,775 cm³ * Easy maintenance * Wide-opening engine hood * Side maintenance flap * Wheelbase 1,950 mm * Track width 1,450 mm * Weight 4,700 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: excellent (used), Year of construction: 2013, Well-maintained HMF 2420-K3 loading crane from 2013, featuring remote control and 6 hydraulic functions. Suitable for mounting on a truck and ideal for construction, transport, recycling, and industrial applications. This powerful HMF loading crane offers excellent lifting performance and is prepared for use with a rotator and grapple. A reliable and versatile crane, ready for immediate professional use. Specifications: HMF 2420-K3 Year of manufacture: 2013 6 functions (can be used with a rotator and grapple) Remote control Load capacity: 5070 kg at 4.4 m reach 3470 kg at 6.3 m reach 2600 kg at 8.2 m reach 2070 kg at 10.2 m reach About Cevoman Fedjz Hpauopfx Al Uopn ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected by our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 2019, operating hours: 2,471 h, Equipment: all wheel drive, Internal vehicle number: VTC30073 More information available at: Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: VTC * Purchase price: 37,500.00 € * Down payment: 10% * Term: 60 months * Monthly installment: 579.93 € Residual value: 7,380.00 € If this offer interests you or you would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. Fpjdpjz Hr Risfx Al Usn We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2011, operating hours: 4,745 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fuel type: gas, construction height: 2,960 mm, gearing type: automatic, Equipment: air conditioning, cabin, lighting, pallet forks, sideshift, trailer coupling, Linde H 35 T - Series 393 - Full Service Forklift - Ex Rental Unit Made in Germany. Good condition, technically sound, and ready for use. The operating hours have been recorded and checked. The forklift is delivered with a gas cylinder. A new accident prevention inspection is available upon request. 4,745 operating hours Full cab - raised - Comfortable driver's seat Exterior mirrors Heating Air conditioning Fpsdswlg Dgspfx Al Uen 2-pedal operation 4 front work lights 2 rear work lights Standard mast Cross lever joystick operation Lift height: 4,450 mm Overall height: 2,960 mm Free lift: 150 mm Integrated sideshift Forks 1,200 x 125 x 45 mm - N E W - Forks - other lengths possible from 1,200 mm - 3rd + 4th valve / dual auxiliary hydraulics SE tires Front tires 80% Rear tires 100% - N E W - Technical specifications - Errors excepted. Sale without warranty.