Used Gantry Loader for sale (4,773)

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Gsdsxl Nfqjpfx Afkott Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: good (used), Year of construction: 2011, machine/vehicle number: NL 201KF3443, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 5,000 rpm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar passage: 73 mm, | Category | Feature | Details | |-----|-----|----- | | General | Year of Manufacture | 2011 | | | CNC Controller | MSX-850 III or M730BM (MAPPS) | Gedpfxjxgui Ro Afkjtt | | Number of Axes | 2 | | | Dimensions (L x W x H) | Approx. 2700 x 1920 x 2120 mm | | | Approximate Weight | 5400 kg | | Main Spindle | Spindle Nose | A2-6 | | | Spindle Motor Power | 15 kW (20 HP continuous / 26 HP peak) | | | Spindle Speed Range | 50 to 5000 rpm (up to 6000 rpm on some models) | | | Spindle Bore / Bar Capacity| 73 mm / Ø 65 mm | | Axis Travels | X Axis Travel | 260 mm | | | Z Axis Travel | 590 mm | | Turret | Number of Tool Positions | 12 stations (BMT) | | | Tailstock (if equipped) | 564 mm travel, MT4 taper | | Machining Capacity | Max. Turning Diameter | 356 mm (over cross slide) / 366 mm (over bed) | | | Max. Turning Length | 510 mm | | | Swing Over Bed | 755 mm (over cross slide) / 924 mm (over bed) | | Standard Equipment | Chip Conveyor | Yes (optional at base version) | | | Tool Measurement | Renishaw probe (dual-arm possible) | | | High Pressure Pump | Yes | | | Lighting & Signalization | Three-color signal lamp | | | Bar Feeder Interface | For bar loader | | | Coolant Tank Capacity | 235 L | | | Others | Gantry Loader part extractor, MAPPS conversational programming, USB/RS-232 interface | Japanese precision (repeatability < 0.005 mm), robust construction for heavy-duty machining, low maintenance requirements.

Condition: excellent (used), Year of construction: 2016, Sell Aluminum Porta Gantry 250KG mobile gantry winch, 2016r in bdb condition. Gsdpsvcdcisfx Afkstt

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: Godpfx Afjvmwn Hokett ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: used, PCB handling equipment from E-Flex SMT microsystems WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-330SD0TM-CI (2022) price: €3,604 WHM-301SD3TM-CI (2022) price: €4,518 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 WHM-201SDNTXL-AI (2022) price: €3,968 WHM-200SD3TM-IA (2022) price: €3,439 WHM-200SD3TM-l (2022) price: €3,738 Godpfex Tzn Asx Afkott

Condition: like new (used), Automatic feeder Mathias Bauerle Loader The device is in very good condition. Gtsdpfxjwzvrxs Afkot Production Germany. Feeding on tranport belts. The possibility of adjusting the extension of the „tail” The adjustable height of the device allows the attachment of the feeder to each machine.

Condition: ready for operation (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: automatic, fuel type: diesel, empty load weight: 11,910 kg, Year of construction: 2020, operating hours: 2,761 h, machine/vehicle number: MAN00000K01048416, Equipment: AdBlue, CE marking, TECHNICAL DETAILS Tyre size: 375/85-24 Axle configuration: 4x4 Gtjdpfsx Tq Ncox Afket Load capacity: 4,000 kg Lift height: 17.55 m Reach: 13.08 m MACHINE DETAILS Power: 55 kW Transmission type: Automatic Fuel type: Diesel Engine brand: TD 3.6 L4 Emission level: Stage V / Tier IV final Drive: Wheel Chassis design: Rigid Dimensions & Weight Transport dimensions (L x W x H): 6.27 m x 2.36 m x 2.45 m Unladen weight: 11,910 kg Operating hours: 2,761 h EQUIPMENT All-wheel drive CE marking AdBlue system Forks Quick couplers Stabiliser Additional hydraulics

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, TECHNICAL DETAILS X-travel: 4,000 mm Y-travel: 3,400 mm Z-travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm C-axis swivel range: 0–360° (in 1° increments) Swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS Control: Siemens 840D SL Axes: 5 controlled Total power requirement: 70 kVA Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head 1,750 Nm Gtsdpfxex Uwnbo Afkst Note: The machine is already dismantled.

Condition: used, Year of construction: 2005, operating hours: 6,900 h, Serial number: CAT0930GETFW0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22139 Specifications: 2005 model Hours: approximately 6,900 112 kW Weight: 13,500 kg Pallet forks (see pictures) Drawer pf lger with Weight (m calibrated) Tires (see pictures) AC/climate Ready for delivery   Description: 2005 CAT 930G with bucket, pallet forks and weight. The scale has never been used and needs to be calibrated, says the owner. The owner has had it since 2007 and by then it had clocked around 4,000 hours. Ready for delivery. Hours: 6900 Gjdpfxex Uwbbe Afkstt Own weight: 13500 Kw: 112 Model: 930G m/ skuffe, pallegafler og vekt. Se timer! SE VIDEO

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, shovel volume: 5 m³, Year of construction: 2016, operating hours: 9,118 h, machine/vehicle number: VCEL150HH00005075, Equipment: AdBlue, air conditioning, The wheel loader's tires have been renewed! TECHNICAL DETAILS Bucket capacity: 5 m3 MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 9.1 m x 3.2 m x 3.9 m Gtodpsx Tqm Iefx Afkot Unladen weight: 26,100 kg Fuel type: Diesel Engine brand: D13J Emissions level: Stage IV / Tier IV final Chassis type: Articulated Operating hours: 9,118 h EQUIPMENT Air conditioning AdBlue system CE marking

Condition: used, mast type: telescopic, Year of construction: 2007, operating hours: 3,700 h, Serial number: YC50000116000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21551 Specifications: 2007 model Hours: approx. 3,700 Lifting height: 17 meters Weight: 11,950 kg Power: 74.5 kW Certified until 08/2026 New pallet forks installed Gtodpfxoxp Awzj Afkjt Extra pallet forks included Bucket (see photos) Declaration of conformity Tires (see photos) Stabilizers One of the rear steering rods is bent (passed inspection) Beacon light Work lights Some rust See video Delivery by agreement Description:2007 JLG 4017 telehandler with two sets of pallet forks and a bucket.The machine is certified until August 2026.The mounted pallet forks are new. An additional set is included, but one fork is bent.One of the rear steering rods is bent, but the machine passed inspection. See video.Delivery by agreement. Hours: 3700 Own weight: 11950 Model: 4017

Condition: used, machine/vehicle number: 371xxxx, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 21618 Specifications: Model year: 1997 Not EU-approved 3 axles Length: 1370 cm Rear platform: approx. 490 cm Middle platform: approx. 322 cm Upper platform: approx. 370 cm Tires (see pictures) Delivery by agreement Description:1997 Vang DC 111 Ts, 3-axle low bed trailer.The trailer is not EU-approved.Delivery by agreement. Gtsdpfx Afsxx H Naskot Technical approved: no EU-approved until: 15.09.2021 Own weight: 7610 Total Weight: 50000 Payload: 42390 Width: 250 Length: 1370 Model: DC 111 Ts 3 akslet brønnhenger

Condition: used, Year of construction: 2012, Serial number: DWGCWLAPTB101xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20995 Engelsk: Specifications: Gedpfx Afswzg Dfskstt 2012 model Hours: approx. 11,150 (can increase) 264 kW Weight: 25,500 kg Central grease Tires (see photos) Scale Rear-view camera Extra lights AC/climate control Radio/DAB See video Ready for delivery  Description:2012 Doosan DL 450-3 wheel loader with bucket and scale.The machine is in daily use, so the hour count may increase.See video.Ready for delivery Own weight: 25500 Total Weight: 25500 Model: DL 450-3 hjullaster m/ skuffe og vekt. SE VIDEO

Condition: used, machine/vehicle number: 224xxxx, Year of construction: 1991, Please contact ATS Norway for more information Please provide reference number upon request: 18312 Specifications: - Not eu approved - 4 axle with loose axle - Missing pictures of axle 4 - Good tires - Air suspension - Manual Extraction 3 metres - Hydr. width of 25 cm on each side - Force on axle 3 - Lift on 2 and 3 - Turn on 1 - Total length 1620 cm Gjdpfovg Awyex Afkett - Width 250 cm - Wheelbase 182/182 cm - Hanger is varnished - Rust will occur - Sold with 21 2-er errors and 0 3-er errors - A number of valve faults that have the most points - Ready for delivery Description: 1991 Vang 4 axle well trailer sold as a repair object. It's quite a long patch, but a lot of it is small things. Call for more info. The trailer has an extension of 3 meters and approx. 25 cm hydr. widening on each side says owner. Forced steering on axle 3, lift on 2 and 3. turn on 1. It comes with a loose axle, we lack pictures of it. The trailer is ready for delivery. Technical approved: no EU-approved until: 31.10.2023 Own weight: 10300 Total Weight: 63000 Payload: 52700 Width: 250 Length: 1630 Model: 4 akslet brønnhenger

Condition: used, Year of construction: 2008, operating hours: 20,000 h, Serial number: VCEL220FT0000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19213 Specifications: - 2008 model - Certified expired on 11.24 - Hours: Approx. 20,000 - Weight: 34,900 kg - 259 kW - Central grease - Tires (see pictures) - Weight - EPSON Printer - Bucket - Total width: Approx. 3.4 m - Radio/CD - Ready for delivery Description: Volvo L220F Wheel loader from 2008. The loader is sold with bucket, scale and printer. Ready for delivery. Hours: 20000 Own weight: 34900 Total Weight: 34900 Gtsdpfx Ajw Upc Nofkot Year controlled: no Year controlled until: 11.24 Width: 340 Kw: 259 Model: L220F Hjullaster m/ Skuffe, vekt og skriver.

Condition: used, machine/vehicle number: SA9CA3A55MH17xxxx, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 16636 - 3 axle - Saf axles - Good tyres, see pictures - Air suspension - Hudr. Limbs - All lights work - Good with light all around - Tool cabinet - Length on plane approx. 750 cm - Total length hanger 1083 cm - Width 254 cm - Wheelbase 136/136 cm - Permitted total weight 25,000 kg - Ready for delivery According to the owner, this is very little used. Not aware of any known errors or deficiencies. Lots of light all around. Trailer has air suspension. Can be delivered round the clock. Technical approved: Yes EU-approved until: 23.01.2026 Gtedpovg Nk Tofx Afkst Own weight: 6425 Total Weight: 25000 Payload: 18575 Width: 254 Length: 1083

Condition: used, Year of construction: 1974, Please contact ATS Norway for more information Please provide reference number upon request: 20713 Specifications: 1974 model Hourly rate is uncertain Weight: 10,400 kg Tires (see pictures) Chains Okay bucket Width: approx. 2.5 m Maintenance is taken care of by owner Ready for delivery Notes: Bad battery Owner says it works, but probably needs some maintenance. Own weight: 10400 Total Weight: 10400 Width: 250 Model: LM 846 Gtedpfjwq Uygsx Afket

Condition: used, Serial number: 721xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21829 Specifications Gtodpoxxpynsfx Afkjt Unsure rs Working width: 290 cm Wheel loader attachment or tractor attachment included Description Tokvam FK diet. It can come with either a wheel loader mount or a tractor mount, but not both. Ready for delivery. Model: FK kost

Condition: used, Year of construction: 2008, operating hours: 37,039 h, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20209 Specifications: - 2008 - Certified - 37039 Hours - 125 kW - 15000 kg - Next service is at 37500 hours - 4x4 - Articulated steering - Quick coupler - 4 - Function - BM coupler - Bucket with straight knife - Lights - Air conditioning - Radio - Ready for delivery Description: Gsdpfjwdvazex Afkstt We have a 2008 Volvo L70F wheel loader w/ bucket from 2021 for sale. The wheel loader has only been used with pallet forks and has never had any hard work according to the owner. All services have been performed by Volvo. Ready for delivery Hours: 37039 Own weight: 15000 Total Weight: 15000 Kw: 125 Model: L70F

Condition: used, machine/vehicle number: SKBD30S30MKE2xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22134 Specifications: Delivered with new EU approval 2021 model Air suspension Tires (see photos) Hydraulic loading ramps Length: 10.51 m Width: 2.55 m Wheelbase: 472/136 cm Curb weight: 6,420 kg Lashing points Deck length: approx. 8.0 m Tool box Description: 2021 Kel-Berg machinery trailer.Delivered with new EU approval.Equipped with hydraulic loading ramps.Deck length approx. 8 meters.Available for delivery on short notice. Gtsdpfx Asx Ty Hqofket Technical approved: no EU-approved until: 20.09.2025 Own weight: 6420 Total Weight: 30000 Payload: 23580 Width: 255 Length: 1051 Model: 2021 Kel-Berg maskinhenger med hydrauliske kjørebruer

Condition: used, Year of construction: 2019, operating hours: 11,775 h, Serial number: bannhj40c97j2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20021 Specifications: - 2019 model - 11775 Hours - 290 kW - 40300 kg - 3-function - Service history - Machine width with bucket: 340 cm - Tires (see pictures) - Lever steering - Central lubrication - Scale (unknown condition) - Printer (unknown condition) - Bucket - ​​Articulated steering - 4x4 - Ready to deliver   Gtodpfx Ajwpiarjfket Description: We have a 2019 Hitachi zw370-6 wheel loader w /scale, printer and bucket for sale. All services have been performed by Nasta. Regarding the scale and printer, this is in unknown condition. Some cosmetic damage may be found. Ready to deliver. Hours: 11775 Own weight: 40300 Total Weight: 40300 Width: 340 Kw: 290 Model: zw370-6 Hjullaster m/ vekt, skriver og skuffe

Condition: used, Year of construction: 2018, operating hours: 14,270 h, Serial number: bannhj40c97j2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20022 Specifications: - 2018 model - 14270 Hours - 290 kW - 40300 kg - 3-function - Service history - Machine width with bucket: 340 cm - Tires (see pictures) - Lever steering - Central lubrication - Scale (unknown condition) - Printer (unknown condition) - Bucket - ​​Articulated steering - 4x4 - Service history - Air conditioning/ac - Lights - Radio - Ready for delivery Description: We have a 2018 Hitachi zw370-6 wheel loader w /scale, printer and bucket for sale. All services have been performed by Nasta. Regarding the scale and printer, this is in unknown condition. The alternator and belt need to be replaced on the loader. Gedpfjwpicyex Afkjtt Some cosmetic damage may be found. Ready for delivery Hours: 14270 Own weight: 40300 Total Weight: 40300 Width: 340 Kw: 290 Model: zw370-6 hjullaster m / vekt, skriver og skuffe

Year of construction: 2019, condition: used, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19694 Description: Gtodpfxovyfa Ds Afkst 2019 Vama EHK2200 wheel loader broom for sale. Everything works as it should, according to the owner. It's also good with brush left on it. There are 2 water tanks with nozzles to reduce dust when sweeping. Ready for delivery

Condition: used, machine/vehicle number: 381xxxx, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 18602 Specifications: - 1997 model - 3 + 1 - Hydraulic Forced steering on 3 and 4 axles w/remote control - Auxiliary axle included - New hydraulic unit for steering - Manual Width - Piece of 2 meters - 1.70 cm Hydraulic extension - A good number of hydraulic hoses have been replaced - The one hydraulic central unit sweats a little hydraulic oil - Delivery by agreement   Description: 1997 Vang trailer Auxiliary axle included. Push piece of 2 m comes with and Hydraulic extension of 1,700 m. In total, you will find an extension of 3,700 m. The trailer is manually extended. There is also forced steering on 3 and 4 axles. Delivery by agreement Gtedpfx Aewphkpjfket Technical approved: Yes EU-approved until: 07.03.2026 Own weight: 11550 Total Weight: 81000 Payload: 69450 Width: 250 Length: 1613 Model: ATHLS 3+1 Brønnhenger

Condition: used, Year of construction: 2003, operating hours: 2,857 h, Steering: skid steer Serial number: cat00226p5fz0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21550 Specifications: 2003 model Gjdexpdlmjpfx Afkett Certified to: 06/25 2857 hours Machine width w/ drawer: 169 cm 41 kW 2886 kg disappoint Tires (see pictures) Lever steering Climate Light Ready for delivery       Description: We have a Cat 226 Compact loader w/ bucket for sale. Everything works as it should according to the owner. It should be serviced. The engine counter has been replaced. Engine hours are approximately 2857. Ready for delivery Hours: 2857 Own weight: 2857 Year controlled until: 06/25 Kw: 41 Model: 226 Kompaktlaster m/ skuffe