Used Bag Folding Machine for sale (67,157)

Condition: used, Year of construction: 1998, Format: 520 mm Ljdpfex Hzxzsx Ab Tjhc Equipment: 4 bags, 1st work 4 pockets 2nd work X Kreuzbruch Unit Flat stack investors

Condition: good (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: Lhodpfsvw Urwex Ab Tjc - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: used, Year of construction: 2008, Folding machine Lodpjychztefx Ab Tohc MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, filling weight (max.): 25,000 g, filling weight (min.): 5,000 g, input voltage: 400 V, 🔶 OPPORTUNITY – AUTOMATIC INDUSTRIAL BAGGING MACHINE Overhauled – Factory tested – Equipped with Remote Assistance Module (NEW) Ready for immediate delivery Automatic industrial bagging machine, year 2015, completely overhauled at our facility. The machine has been: ✅ Fully overhauled ✅ Factory tested and inspected ✅ Checked for mechanical, electrical, and safety components ✅ Equipped with a (NEW) Remote Assistance Module ✅ Available for immediate delivery – EXW Cremona, Italy 📦 Applications Designed for the automatic packaging of: • wood pellets • granular materials • animal feed • plastic granules • similar bulk materials 📊 Technical data Year: 2015 Power supply: 400 V – 50 Hz Installed power: 6 kW Average consumption: 2.5 kW Machine weight: 1,200 kg Maximum bag weight: 25 kg Control panel with color touch display Film reel specifications: • Maximum width: 1,050 mm • Maximum diameter: 600 mm • Film thickness: 60–120 micron Bag format: • Width: 350–500 mm Ljdeyk D Sdjpfx Ab Tehc • Length: 500–700 mm Productivity: Up to 9 bags/minute ≈ 360 bags/hour 🔒 Safety and compliance • Emergency stop button • Main disconnect switch • Doors protected with safety systems • CE compliant 💰 PRICE €35,000.00 + VAT (EXW – ex works Cremona, Italy) ➕ OPTIONAL AVAILABLE Lot of 20 film reels (110 kg each) Price: €2,000.00 – negotiable

Condition: used, total length: 7,300 mm, total width: 1,800 mm, total height: 1,550 mm, Empty weight: 6.000 kg Price: On request Max. working width: 6050mm Max. thickness: 1.5mm Max. opening: 250mm Max. angle: 180gr Number of adjustable angle-sequences: 8 Ledpfow Evdijx Ab Tshc With cutting device on back-side - Documentation available: No - CE certificate present: No - Serial number: 425 - Drive system: Conventional - Power [kW]: 4.5 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 6050 - Max. opening [mm]: 250 - Max. bending angle [°]: 180 - Transport dimensions: 7300mm x 1800mm x 1550mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, pallet feeder, 6 buckles + 2 knives, pressing SBP66 Lsdpfx Ajyk Dlqeb Tshc

Condition: used, Combination Folding machine MBO K800.2 SKTL/4 AUT Navigator Lodeydmfyspfx Ab Tjhc Falzmaschine / Combination Folding machine MBO K800.2-S-KTL-4 Navigator Baujahr / Year 2007 - Serial-No. 0124999 Rundstapelanleger / Round Pile Feeder Falztyp  4 Taschen - 2 Schwerter - 1 Seitentasche Folding Type 4 Buckles - 2 knives - 1 Side Buckle Schuppenauslahge mit Presswalzen / Stream delivery with integrated pressing MBO ASP 66 - 2 ME  Inklusive Kompressor / Include Compressor Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical Data: Lhjdpeyi A I Isfx Ab Tec - Max. working width: 2040 mm - Max. material thickness at 40 kg/mm² tensile strength: 4 mm - Bending angle adjustment: electronically pre-selectable from 0 to 135° - Automatic sequence control for a complete working cycle - Maximum opening width / stroke of the upper beam: 350 mm - Height adjustment: - of the bending beam: 100 mm - of the lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Accessories: motorized bending beam adjustment - Backgauge adjustable via handwheel - Electric foot switch - Space requirement with backgauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: new, The SBS E 2540/1,5, a manual folding machine from KNUTH, is a robust and reliable option within the Folding Machines category, specifically designed for the Manual Folding Machines group. With a working length of 2,540 mm and the capacity to bend metal sheets up to 1.5 mm thick, this machine excels in precision bending for long sheets, making it ideal for producing small series thanks to its adjustable angle stop. Its heavy-duty construction ensures durability, while the segmented upper tool allows for increased bending options. Additionally, the SBS E-series machines feature a manually adjustable rear gauge as an optional enhancement to further streamline operations. Whether you are considering installation, safety features, or the right accessories for your projects, the SBS E 2540/1,5 stands out in sheet metal processing. To enhance your workshop capabilities, request a quote now! Ljdsu E Infopfx Ab Tjhc

Condition: new, The KW 100 Folding Machine from KNUTH is a robust angle bender designed for the manual bending of flat, round, and square steel parts. It features a sturdy design that allows for screw-mounting on a workbench, allowing for infinitely variable bending stop adjustments to suit your needs. With an eccentric quick-clamp, the KW 100 streamlines operation, enabling bending angles up to 120 degrees. For enhanced precision, it includes a bending angle read-out, ensuring high repeatability. With a bending capacity of flat steel reaching 100x5 mm, this machine is ideal for repair shops and metalworking applications. The standard equipment includes various essential tools such as an angle stop, bending plates, and a bending lever. You can rely on the performance of the KW 100 when looking for a competent Folding Machine suitable for diverse bending tasks. Order online today and experience the reliability of our Folding Machines in your metalworking projects. Ledpfsuxdd Nex Ab Tshc

Condition: good (used), Year of construction: 2007, 1 point 2 points boxes 3 points boxes track width 880 mm Line speed: 0-250m/min adjustable Paperboard: 250-500GSM paperboard Box forming: One side and two sides gluing. Gluing: Two stations, 2 upper stations with two grinding wheel Auto Feeding. Lodpjvf Ezxsfx Ab Tehc Feeding, folding and press use one vibration motor driving. Gluing unit HHS 3 Guns

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. Ledpfx Asyi Eqxjb Tjhc The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours.

Condition: ready for operation (used), functionality: fully functional, Equipment: compressor, Eurofold 235 Bottom-suction feeder / 2 folding pockets / shingled delivery Compressor / Perforating knife Operating manual Paper format: 35 x 65 cm Paper weight: from 60 to 240 gsm Machine runs without faults. No frills. Set pocket format – insert paper – set roller gap with paper strip – switch on – fold – done! No touch screen, no electronic assistants, no servo motors. Lhedoyilpropfx Ab Tsc Just a simple, fast folding machine...

Condition: like new (used), functionality: fully functional, Horizon CRF-362 – Automatic Creaser Folder For sale: Horizon CRF-362, high-performance automatic creaser and folder, designed to crease and fold in a single pass, even on thick paper stocks and digitally printed materials, eliminating cracking. Ideal for digital print shops, offset printers, and bindery workshops requiring maximum precision and versatility. 🔹 Key Features - Creasing and folding in a single operation - Up to 10 crease lines per pass - Crease position adjustment in 0.1 mm increments - Positive and negative creasing in one pass - High-resolution color touchscreen - Memory for up to 200 jobs - Suction belt feeding system with ultrasonic double-sheet detection - Precise sheet registration with alignment adjustment - Dual output: lower tray (creasing only) and upper conveyor (folded jobs) 🔹 Formats and Materials - Max. format: 364 x 865 mm - Min. format: 105 x 180 mm - Paper weights: - Standard paper: 80–350 g/m² (with folding) / up to 400 g/m² (without folding) - Coated stock: 105–350 g/m² (with folding) - Laminated material: up to 0.5 mm (without folding) 🔹 Folding Types - Parallel fold - Letter fold - Accordion fold - Double parallel fold - Gate fold - Short fold Perfect for: - Softcover book covers (spine, hinge, and flaps) - Menus Ljdpfxjyizcwj Ab Tjhc - Invitations - Cards - Bi-folds and tri-folds - Work with thick or laminated papers 🔹 Production - Speed: up to 4,500 sheets/hour (A4, 1 crease + fold) - Pile height: 150 mm - Machine weight: 345 kg - Power supply: 200–240V, single phase 🔹 Options - PRF-36 perforation unit - Various creasing blade widths (0.5 mm and 2 mm)

Condition: used, The Stahl T 52.3T/4-F-KB is a high-performance folder-gluer currently in operation at a printshop in Germany. Designed for efficiency and precision, this machine is equipped with four buckle plates and one knife, making it ideal for a wide range of folding and gluing applications. With a 520 mm working width, the T 52.3T/4-F-KB handles various box and carton formats, ensuring versatility for packaging production. The integrated flat pile feeder streamlines material handling, improving workflow and productivity. This folder-gluer is a reliable solution for businesses seeking consistent, high-quality finishing. Lodpfx Aboxmi Eme Tohc Format: 520 mm Equipment: 4 buckle plates 1 Knife Flat pile feeder

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition Lodpfx Aexw S Ixob Tohc For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: used, Year of construction: 2009, sheet width 3100 mm plate thickness / mm distance between columns / mm Lsdpfx Abswbi Itj Tehc Swivelling bending machine 3100SK Folding bench Sheet metal bending machine Folding bench

Year of construction: 2009, condition: ready for operation (used), Opening width/ height: 25-450/ max. 200mm, min. product length: 80mm, max. film roll width: 550mm, max. roll diameter: 350mm, working height: 800-900mm, controls: SIEMENS S7-300, length: 2140mm, width: 1450mm, with shrinking tunnel. Lhjdpfxofft Sgj Ab Tsc

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Lhjdeu Rc R Sepfx Ab Toc

Condition: ready for operation (used), Year of construction: 2009, Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible. Lhsdpfxovtqrrs Ab Tjc

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Ledpfxjw Na Hbj Ab Tohc

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Lhedpox Ectujfx Ab Tec

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible. Lhjdpfx Ajvtqrfjb Tsc

Condition: ready for operation (used), A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible. Lhedpjubbzzjfx Ab Tsc

Condition: ready for operation (used), Year of construction: 2006, An automatic vacuum packaging machine Saccardo Arturo Figli with double chamber design is available. Sealing bars: parallel, number of bars: 2, bar length: 1300mm, max. lid internal height: 360mm, min. operating pressure: 5mbar, vacuum capacity: 2x540m³/h, pump type: PVR. Machine dimensions X/Y/Z: approx. 2700mm/1100mm/1300mm, weight: approx. 1000kg. On-site inspection is possible. Ljdpfjygmbmex Ab Tjhc