Block press buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
Hydraulical block- and glue press Brand: Hess Type: SSL Year: 1990 Technical data: 10 Press cylinders each 3500kp (35 000 N) at 120bar 4 x mechanical hold down clamp Working length 6000 mm Working height 1700 mm Pressure plates depth 150 mm Need of space for assembly approx. 6500mm x 900mm x 2800mm 7pgvvzz3i Volt/Hertz 380/50 KW 1.5 Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding. more
4
This Müro block gluing pres 4 x 5000 A 4 WT is suitable for mass production of form sets, brochures, catalogs, weighing cards, calendars, Writing pads in blocks, note pads, receipt blocks, writing pads and notepads. 4 presses with a stacking height of 54 cm each on a rotatable base plate, therefore a large holding capacity and continuous operation. Precise and fast stacking in slanting position of presses. Fast drying by hot air blower. While a press is being fed, the binding material is already... more
4
Manufacturer: Hess, Type: Blockpresse, Hydraulical/pneumatical: yes, Work piece width min-max mm: 120, Min.-max. workpiece length in mm: 6000, Min.-max. workpiece height in mm: 1400 , Press length mm: 6000, Number of cylinders: 12, Vgg3q7n80 more
4
4.Fach block size press; good condition; cleaned and checked. 1xTrockner; 1 x stack boost for small stack; 1 x heat baffle; Einlegehoehe 525mm; Einlegebreite 350mm. Nuneqfi more
6
Block size press A3 with 2 x dryer 97hoxrf8c more
6
I sell the hydraulic press for wooden blocks, glued massive and euroblocks: Pollak Sala LS A 911 WallPress, year 2004, low used 9fh8uorgy Working field9000x1100mm, Working thickness: 180mm. Pneumatic side-pressure In price with glue application with inverter-control. more
2
Size of working area of about 6000 x 1000 mm Maximum power of 120 mm glued The number of vertical beams 18 pc The number of horizontal compression unit 3 pieces The stroke of the hydraulic cylinder 100 mm Ms0zv The working pressure of 16 MPa machines Maximum work force 4.5 tons Tank capacity pump 40 l Power input of 2.2 kW Machine weight 4 t more
3
Block Press Fabr. Bürkle 1800 mm x 250 mm Electric pressure 360 ​​bar / cm 3 flask each. 95 mm Pass 280mm Vr7xvkv3t more
6
two ETag-block press, no label present, about 25 years old, good condition, ready for instant action, international buyers are welcome. Qjkneisy3 more
4
4-Blockleimprese; cleaned and checked. Format A3; Working width 525 mm; Einlegehoehe max. 525mm; 2 x dryer. 9w3bj9dlq more


block press
every day

New machines via email!

Be informed!
6
Working length 6600 mm Working width (thickness of glue) 40-220 mm working height 1200 mm pressure vertical 60-120 N/cm2 12 vertical pressure cylinder 12 horizontal cylinder 12 hold-down pressure of horizontal 40 - 60 N/cm2-specific press pressure 5-20 kg / cm2 each cylinder and the hold-down devices separately absperbar 9000 = dimensions L, B = 1300, H = 2500 mm Glue spreader with Foerderere weight 5000 kg Dvhff0z MINT condition, zehr little used more
6
With mobile base, hot air blow drying, thermal baffle for even drying and dies for smaller stacks. A capacity for 4-stack bonding sets of forms or brochures DIN A 5 Stack height: 50 cm press Width: 35 cm Press Depth: 32 cm advantage of the mobile support frame and the hot air blow drying. After sizing and possibly Begazung the ring binder, the flap is opened in the base and turned on the hot air drying thus drying up and down equally quickly occurs, the heat baffle placed. The heat air blower dr... more
6
Pressa “Baioni” mod. Tornado Pressa per Listellare, piano da 6000x1300 mm ad alta frequenza (90 KW) Lunghezza complessiva mt 23. Marca: Baioni Mod: Tornado. Tipo: BP/TO. Pressing line “Baioni” mod. Tornado blockboard press, 6000x1300 mm, high frequency (90 kw) Xr7ujrdqg total length: mt 23. Maker: Baioni Mod: Tornado. Type: BP/TO. more
4
Muero/5000 A4 WT; good condition; 1 x fan; Stack boost for small stack; Heat deflector; Paper cutter with a frame. Mzec7 more
3
Muero 5000/A2; good condition; 3 fan; Device for small stack; Heat deflector; A2 format. Ieirumz more
5
Muero A3; good condition; cleaned and checked. 2xTrockner; Stack height max. 52, 5 cm; Stack width max. 52, 5 cm; Depth 32cm. Gyysyvtl more
1
Elect./Voltage: 22l9oer0t REGENT EXPRESS 3200 Bridge Saw:The ""EXPRESS 3200"" light weight MONOBLOCK design BRIDGE SAW by REGENT has the power and agility to successfully cut quickly and will give your Granite Shop that competitive [...] SAW SPECS: -- The REGENT ""EXPRESS 3200"" has a powerful 20 HP Direct Drive Motor. -- Able to handle a variety of Blades from 16"" to 24"". -- When using the 24"" Blade the ""EXPRESS 3200"" BRIDGE SAW can cut pieces up to 8"" thick. -- The blade spins... more
5
Inrush type ES00-rated voltage 220V to 400V, 50Hz to 60Hz Nennfreqünz Daürstrom max 16A-Prei per piece-3x presence Weight 0.3 kg Cy9lykuc more
6
pressure 60 t no. of strokes 80 - 400 Hub/min sheet width 150 mm Clorsjn table-size 700 x 530 mm dimension of ram 700 x 430 mm distance table - lower edge of ram 350 mm ram stroke - adjustable min/max 20 - 80 mm feed length 5 - 150 mm total power requirement 15 kW weight of the machine ca. 9 t dimensions of the machine ca. m - with band-feeding unit - 2 connecting rods - adjustable stroke - strip decoiler - noise absorbing cabine more
4
Here are the technical data of the offered machine: If the data does not fit exactly, please request an individual offer according to your wishes with just one click: >>> Contact us for an individual offer <<< Baimkc8ypp HIDRALMAC manufactures presses exactly to your wishes at surprisingly low prices! In order to avoid problems with the procurement of spare parts, almost exclusively components from REXROTH / BOSCH, SIEMENS and SICK are installed in the HIDRALMAC presses. =====... more
5
pressure:100 t punching cross-cut in cmm:2430 mm² stroke:10 - 50 mm throat:510 mm Working height:1100 mm total power requirement:7,5 kW Ojij90o weight of the machine ca.:2,4 t dimensions of the machine ca.:1,78 x 1,02 x 2,06 m Hydraulic Peddinghaus punching machine 1001, with conventional drive, height-adjustable wiper with removeable panel. The stroke length and stroke position is adjustable between 10 - 50 mm at the Hydraulic 1001. The punching machine is equiped with a hydraulic low pressur... more
3
pressure performance 360 to working width 4,100 mm upright width 3,100 mm outreach 355 mm distance table pressing bar 430 mm 37terz9z hydraulic stroke 235 mm number of cylinders 4 retraction force 40 to forward speed 100 mm / sec. bending speed 8 mm / sec. retraction speed 70 mm / sec. working width 900 mm two front support arms depth under flur 900 mm motorized backgauge universal die electrical data 400 V / 24 KW space requirements width - 4,300 x depth - 1,800 x height - 2,9... more
6
Maximum cutter diameter: 300 mm maximum notching width: 325 mm Max. Notching depth 110 mm Max. Profile height 150 mm Pneumatic material feed more
5
Linear bearing, carriage-type SHS25C1SSC1 (GK) block price per piece-2x Available Weight 0.8 kg / piece Fh033il more
Screw air compressor Atlas Copco GA 708 PE Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkuehlt. Usable volume flow rate, in accordance with DIN in 1945 at the outlet from the compact system measured and related to Ansugbedingungen pe at maximum operating pressure: 8 bar 122 1/s; 7.32 m ³/min The compression system is designed for operating pressures of 4 to 8 bar Main features: Bai... more
3
2 Joka punching irons type SW 8-150, throat 150 mm, install height 142 mm, tool capacity diameter 1 - 8 mm, material thickness 4 mm in max. 60 kg/mm². price 115,-- EUR Diverse punching dies. ===== Mt0hiw 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, mater... more
1
1 used, well preserved pneumatic chain hoist capacity 1 to approx. 18 m hoisting speed without load at 6 bar lifting height: 10.3 m / min with load 5.3 m / min speed: 6.7 m/min (reduced speed at a lower air pressure) 2-line chain size: 6.3 x 19.1 air consumption at full load: 25 l / min compressed air: 400-600 kPA, 57-85 psi Iozcu307g more
4
pressure 700 bar motor 220 Volt Mxywp weight 12,0 kg total power requirement 0,37 kW more
5
High-pressure centrifugal fan, Dust extraction, exhaust extraction, Schweissrauchabsugung, exhaust, fan, fan pressure br / -Motorleistung: 11 KW br / -Density 1.2 kg / m br / -Volumenleistung: 84 m / min br / br -Druckehöhung 3800 Pa / input port 275 mm br / output port 270 x 130 mm br / -dimensions 1000/800 / H700 mm br / -Weight 252 kg S0xei2t33 more
1
Pressing force: 160 kN maximum tool length: 550 mm Length x width x height: 820 x 850 x 1520 mm Infinitely adjustable stroke: 160 mm Cdo9rttm Weight: 1200 kg The photo shows another similar machine. more
5
working width 4,100 mm maximum Cm33r9lhm press force 1,500 KN maximum upright width 3,700 mm outreach C-pillar 300 mm stroke of folding beam 215 mm working speed 6 mm / sec CNC control CYBERLEC DNC 70 Y1-2, X controlled backgauge 600 mm manual crowning divided top tool - universal die electrical data 400 V / 7.5 KW space requirements width - 4,400 x depth - 1,400 x height - 2,700 mm weight approx. 13,400 kg   more
6
Machine type: Rapida RA 105-5+L ALV2 CX SPC Condition (technical): 5 (of 5) Condition (appearance): 5 (of 5) Sheet size: 75 x 105 Totalizer: 160 Million impressions Available from: 11/2017 Machine is: in production installed 2008 P40 ... more
5
pressure 63 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 250 mm distance between table / ram 300 mm rapid drop speed 90,0 mm/sec Iyderes2 working feed 7,0 mm/sec oil volume 120 ltr. table height 900 mm return speed 60,0 mm/sec dayligth 400 mm total power requirement 5,5 kW more
4
Maximum pressure: 30 kN Max stroke: 150 mm 2-hand operation X0zgqkhhw Speed and force Steplessly adjustable more
5
High-pressure centrifugal fan, Dust extraction, exhaust extraction, Schweissrauchabsugung, suction fan, pressure blower, vacuum blower br / br / aggregates come from a UV paint drying br / -Motorleistung: 0.43 KW br / speed 2800 r / min br / -Volumenleistung : 22.5 m / min br / br -Druckerhöhung 580 PA / connector input 120 mm br / output port 160 mm br / -2x blower available br / prize piece br / -dimensions 530/350 / H300 mm br / -Weight 10 kg Lxgib more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm Mskwyo depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
4
pressing force approx. 85 to passage width approx. 400 mm piston stroke 370 mm Mvoxj installation height up to the middle of the piston rod approx. 170 mm operating pressure adjustable 150 bar electrical data 380 V / space requirements length - 2,700 x depth - 1,200 x height - 1,250 mm weight approx. 2,200 kg   more
1
Machine type: SM 102-5P2 Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 72 x 102 cm Totalizer: 182 Million impressions Available from: Immediately available E8uzkvlq3 Machine is: Press Ce... more
2
pressure 1,2 t throat 105 mm stroke 50 mm Working height 180 mm table-size 280 x 200 mm air pressure 7 bar Bxlqd8ty weight of the machine ca. 130 kg weight of the machine ca. 70 kg dimensions of the machine ca. 0,60 x 0,60 x 1,40 m more
6
used in production: 1 x judge PEKR 125 gap eccentric press facilities: Pneumatic disc brake Compressed air-controlled multi-plate clutch Scope of delivery: 1 x judge PEKR 125 gap eccentric presses Operating instructions English year of construction: 1964 Force of pressure: 125 t Throat depth: 400 mm table Lxw: 1100 x 750 mm Baiqn0gpfj Stoesselmasse Lxw: 900 x 650 mm Distance table - RAM: Max 450 mm Stroke adjustment: 6-115 mm slide adjustment: 100 mm stroke rate: 60/min Durchfall... more
5
High-pressure centrifugal fan, Dust extraction, exhaust extraction, Schweissrauchabsugung, suction fan, pressure blower, vacuum blower br / br / aggregate as coming from a Heesemann wide belt sander for vacuum carpet br / -Motorleistung: 5,5 KW br / speed 7250 U / min br / -Density 1.2 kg / m br / -Volumenleistung: m / min br / br -Druckerhöhung Pa / connector input 100 mm br / output port 100/150 mm br / -dimensions 760/680 / H620 mm br / weight 145 kg Lwsxl more
4
pressure 125 t chamfer lenght 3100 mm distance between columns 2700 mm Control Operateur X1/X2 axes 600 mm R1/R2 axes 120 mm Z1/Z2 axes 0-2500 mm Ddk38sf total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. 8 m more
4
load capacity approx. 60 tons diameter 700 to 5,500 mm Gu8e2k self-centering roller blocks one drive unit - one rotating unit - load capacity 30 tons each roll diameter 500 mm electrical data 380V space requirements length - 3,100 x depth - 1,100 x height - 1,200 mm - per unit weight approx. 3,320 kg more
6
Machine type: XL 75-5-P3+LX-C Condition (technical): 5 (of 5) Condition (appearance): 5 (of 5) Sheet size: 53 x 75 cm Totalizer: 106 Million impressions Available from: Immediately available Machine is: on Stock 2l327ybvj ... more
1
pressure 6 kN throat 85 mm stroke 25 mm height adjustment 80 mm distance between table / ram 35 - 140 mm ram diameter 8 mm U3cyntvdh table-size 160 x 100 mm weight 17 kg dimensions of the machine ca. 160 x 220 x 550 mm more
6
Maximum bending length: 1200 mm M0qwd Maximum pressing force: 250 kN Backgauge and immersion depth of the tool about CNC control programmable Seconds manual tool more
5
High-pressure centrifugal fan, Dust extraction, exhaust extraction, Schweissrauchabsugung, exhaust, fan, fan pressure br / -Motorleistung: 15 KW br / -Density 1.2 kg / m br / -Volumenleistung: 126 m / min br / br -Druckehöhung 3600 Pa / input port 270 mm br / output port 275 x 130 mm br / -dimensions 1000/800 / H700 mm br / -Weight 254 kg S0xd9koi2 more
6
Technical details Press print desc. 250,000 kg piston stroke 200 mm Zx079hm Projection / table depth 400 mm Center plunger to the wall Height 550 / 800 mm Table width 2500 mm Table height 700 mm Total height / width / depth 3000 mm / 2300 mm / 2100 mm Plunger bore (H7) 80 x 130 mm 2.4 x 2 m Weight approx. 11 t External dimensions approx. 2500 x 2035 x 3300 mm Connection value 20 kVA more
6
Tensol 8m length of bending sheet metal up to 1 mm thickness in iron - aluminum more Rjod3flb Comes from Steve and cheap offered reasons of space! Bends with rolling scissors hydraulic opening and closing hydraulic more


block press
every day

New machines via email!

Be informed!

to

to

Change search
BLOCK PRESS
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close