9
Commission 55787-29
Load capacity 4000 kg
Drive type diesel
B7d9yqeadd
Mast type telescopic
Lifting height 17500 mm
Overall height 2476 mm
Free lift 0 mm
Forks 1200 mm
technical new
optical new
tires_front 400 x70 x 24 air
tires rear 400 x 80 x 24 air
special equipment 3rd valve, working light rear, working light front, heating, soot filter, STVZO approval, full cabin, CE certificate
9
Commission 55746-98
Load capacity 4000 kg
Drive type diesel
Mast type telescopic
Lifting height 17500 mm
Overall height 2476 mm
Free lift 0 mm
Forks 1200 mm
technical new
optical new
tires_front 400 x 80 x 24 air
tires rear 400 x 80 x 24 air
Special equipment 3rd valve, working light rear, working light front, heating, soot filter, STVZO approval, full cabin, CE certificate
Mw8ppg
10
Commission 55789-92
Irnl7gq0a
Load capacity 4000 kg
Drive type diesel
Mast type telescopic
Lifting height 17500 mm
Overall height 2476 mm
Free lift 0 mm
Forks 1200 mm
technical new
optical new
tires_front 400 x 80 x 24 air
tires rear 400 x 80 x 24 air
special equipment 3rd valve, working light rear, working light front, heating, STVZO approval, full cabin, CE certificate
9
Commission 56731-14
Load capacity 3600 kg
Hb9vdp
Drive type diesel
Mast type telescopic
Lifting height 11852 mm
Overall height 2430 mm
Free stroke 0 mm
Forks 1200 mm
technically new
optical new
tires_front 400 x 80 x 24 air
tires rear 400 x 80 x 24 air
Special equipment 3rd valve, working lights rear, working lights front, heating, soot filter, STVZO approval, full cab front windows protection grille
9
Here we offer a HS simulators temperature test chamber.
Water cooled
Inner dimensions: width 850 mm, depth 800 mm, height 870 mm
12 Amp. 7,5kW 380V
Temperature -40 /+ 180°C
Type: HS 580 T 40
For you as a buyer for safety the following information!
The following points are carried out on our offered chambers in advance:
Functional check and replacement of necessary components
New filling with legally compliant refrigerant
After successful inspection, the chambers are subjected to a test run, wh...
5
Trailer work platform DINO 180 T-1
Manufacturer : DINO
Type designation : Dino 180 T-1
Year of manufacture : 2006
Working height : 18,00 m
Platform height : 16,00 m
Lateral reach : 10,70 m
Pivoting range : 500 °
Total weight : 1.740 kg
Length : 7,35 m
Width : 1,78 m
Clearance height : 2,00 m
Size of working basket : 1,30 m x 0,70 m
Load capacity basket : 215 kg
Support : folding supports
Support width : 4,20 m
Drive : Electric 220 V/16 A/ Diesel
Special equipment:
220 V connection to the workma...
14
15
General information
Type: Truck aerial platform
Mileage: 439.548 km
Colour: Yellow
Field of application: Construction
Drivetrain
Type of fuel: Diesel
Weights
Empty weight: 9.320 kg
Functional
Mast: articulated arm
Lifting capacity: 320 kg
Working height: 1.800 cm
Maintenance, history and condition
Number of owners: 1
Technical condition: good
Visual appearance: good
Other information
EPA Marked: yes
Delivery terms: EXW
Max. horizontal reach: 1300 m
Additional information
Please contact Vin...
6
Cast iron bed - T-slots floor plate
Length: 2000 mm
Width: 1600 mm
Thickness: 180 mm
On crown thickness 330 mm
Weight: approx 3 T
B97j9rlovw
8
Here we offer a HS simulators temperature test chamber.
Water cooled
Inner dimensions: width 850 mm, depth 800 mm, height 870 mm
12 Amp. 7,5kW 380V
Refrigerant HP62
Temperature -40 / + 180°C
Type: HS 580 T 40
For you as a buyer for safety the following information!
The following points are carried out on our offered chambers in advance:
1. function check and exchange of necessary components
Bdpuvk2ehb
2. new filling with legally compliant refrigerant
3. leak test with certificate
4. after succ...
1
GALLUS T 180
Year: 1987
3 x Letterpress
1 x Flexo Unit
1 x Hotfoil Unit
width: 180mm
Rewinder
Unwinder
Delam/Relam
Condition: Machines are Complete and in very good Condition.
3pijdyuv
Available : Immediately
3
Trailer work platform DINO 180 T
Manufacturer : DINO
Type designation : Dino 180 T
Year of manufacture : 2005
Working height : 18,00 m
Platform height : 16,00 m
Lateral reach : 10,70 m
Pivoting range : 500 °
Total weight : 1.740 kg
Length : 7,35 m
Width : 1,78 m
Clearance height : 2,00 m
Size of working basket : 1,30 m x 0,70 m
Load capacity basket : 215 kg
Support : folding supports
Support width : 4,20 m
Drive : Electric 220 V/16 A
Special equipment:
220 V connection to the working cage
Tract...
4
Laminal flow hut to work in clean environment
Ijdjlpcdg
8
- Offer number: 267/116
- Induction motor with gearbox
- Manufacturer: SEW Eurodrive
- Type: VR/4114ENHU-180
- Power :Motor 0,37 KW 230/400V 1380 1/min Induction 11 W
- dimensions: W 540 x H 140 x D 230 mm
- with mounting accessories
- Weight : 15 Kg
- Quantity sold per auction 1 pcs ( 3 pcs available)
- optical condition according to photos
- New with traces of storage
- functional
Notes:
The goods offered here usually come from company liquidations and insolvencies. Due to missing nameplates i...
6
Here we offer you a CTS temperature test chamber.
Water cooled
CTS temperature test chamber
Technical performance data:
Temperature working range
Temperature range -70°C/+180°C
cooling rate 3,0 K/min
Heating speed 3,5 K/min
Temperature constancy, temporal ≤± 0,3 K
Dimensions:
Test volume: 600 litres
Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm
External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm
Operating data...
4
Field of application: Construction
Empty weight: 372 kg
Rental currency: EUR
Working pressure: 125 bar
Can3vqdscm
Required hydraulic flow: 55 l/min
Please contact Philip Müller for more information
5
Clamping plate with T-slots, plate field, welding table, welding table, pallet changer
-comes from a CNC machining center MAHOTyp MC 600
-Width: 500 mm
-Length: 500 mm
-Height: 180 mm
G7pqna9
-with supporting ribs
-Groove width: 14 mm
-Number: 1x tables available
-Price: per piece
-Weight: 200 kg/piece
6
Layout: Crusher
Year of manufacture: 2021
Attachment suited for: Construction machines
Technical condition: very good
Visual appearance: very good
Bu8fnizu
to fit 1-2, 2 ton excavator, hydraulic flow range 12-35 L/min, 100 kg, CE marked
15
15
6
OFFER 22012
Technical data:
- Plate length approx. 3000 mm
- plate width approx. 1800 mm
- Plate height without underframe approx. 350 mm
- plate height with underframe approx. 1020 mm
- Thickness of the top plate approx. 80 mm
- 7 T-grooves in table surface length 3000 mm
- center distance of the T-slots in the table surface 250 mm each
- center distance of T-slots from outer edge 125 mm
- T - groove width approx. 35 / 65 mm
- T - groove depth approx. 62 mm
Gaydehey
- div. through hole...
5
Pallet Racking Heavy Duty Storage Racking
Basic bay 450x80x360 cm 248,00 €
Basic bay consists of:
2 uprights height according to choice
4 cross beams 360cm (180 cm on request)
Basic bay 400x80x360 cm // 231,00 €
Basic field consists of:
2 uprights height according to choice
4 trusses 360cm (180 cm on request)
Extension panel 450x80x360 cm // 168,00 €
Bi2mvqdyes
Extension field consists of:
1 stand height according to choice
4 trusses 360 cm (180 cm on request)
Extension panel 400x80x360 cm...
3
Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements
-Clamping angle for: workpiece clamping
-T groove: 14 mm
-T groove spacing: 64 mm
-Wall thickness: mm
-Threaded holes: M12
Ptphku
-Hole spacing: mm
-two-sided: can be clamped
-Dimensions: 560/445/H180 mm
-Weight: 113 kg
7
Carrying capacity: 2.730 kg
GVW: 580 kg
Front tyre size: 185R14C
Rear tyre size: 185R14C
Cargo space dimensions(LxWxH): 3,66×1,8×0,3
2lvzwtgj
Please contact Philip Müller for more information
15
13
General information
Field of application: Construction
Serial number: CAT00C22KGBY12476
Drivetrain
Type of fuel: Diesel
Make of engine: Caterpillar C2.2
Pwtjl
Weights
Empty weight: 608 kg
Functional
Generator capacity: 22 kVA
Dimensions of cargo space: 176 x 94 x 123 cm
Other information
EPA Marked: yes
EPA Marked: yes
Fuel consumption: 4.3 Liter/Hour at 75% Load
Generator: LC1114M
Frequency: 50
Voltage: 400
Drill equipment: Tank, Battery, Control Panel, Steel canopy
Water tank volume: 55 l
...
4
OFFER 22011
Technical data:
- Plate length approx. 3000 mm
- panel width approx. 1800 mm
B92ibrgwyo
- panel height approx. 350 mm
- thickness of the top plate approx. 80 mm
- 7 T-slots in table surface length 3000 mm
- center distance of the T-slots in the table surface 250 mm each
- center distance of T-slots from outer edge 125 mm
- T - groove width approx. 35 / 65 mm
- T - groove depth approx. 62 mm
- div. through holes 80 - 25 mm
- Connection port for identical existing T-slot plate...
5
4
Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine
-Width: 200 mm
-Length: 1800 mm
-Height: 45 mm
Qqpolqjj
-Groove width: 11 mm
-Weight: 117 kg
5
•It consists of two robots and a robot control device.
•The robot control device is designed in such a way that it can separately control operating ranges and speeds of the robots through 7” touch-operated PLC.
Owoxy02t
•Distance measurement of the robots is carried out by encoders.
•Operating ranges and speeds of both robots can be adjusted on the panel and independently.
•The operating range, speed and operated memory can be monitored on the screen during operating process.
•This particul...
5
Multi-spindle head, multi-spindle drill head, dowel drill head, fitting drill head
-Dimensions: 190/85/75 mm
-Bore distance: 26 mm
Qlaywhztj
-Middle drill: 5 mm offset
-Number: 2x drill heads available
-Price: per piece
-Weight: 2 kg/piece
3
General Data
Machine weight 600 kg
Control Unit
Brand T-DRILL
Additional Equipment
Run out table
This T-DRILL TCC-50+RL4000+RCT2000 Tube Sawing Cutting Machine was manufactured in 1999 in Finland. This machine is operated through a control unit of the same brand. It include a run out table.
3kkkxurd
Application Types
Sawing
6
Pressure total: 315 ton
Stroke: 1100 mm
Daylight: 2200 mm
Table surface area : 2500 x 1000 mm
Slide area: 2500 x 1000 mm
Die weight at the ram max.: 6000 kg
B8nwcjoryj
Approach speed: 600 mm / sec
Working speed: 32 - 230 mm / sec
Return speed: 600 mm / sec
Required power: 158 kW
Weight of machine approx.: 44 ton
Height over floor approx.: 6175 mm
Automation
OvenManufacturer SARLIN FurnacesTyp 0950WB-EP-85258 YOM 2003
10
Commission 6111-73
Load capacity 0 kg
Drive type
Mast type Standard
Lifting height 0 mm
Overall height 2566 mm
Free lift 0 mm
Forks 0 mm
technically new
optical new
Jx829q
tires_front
tires_rear
special equipment 3rd valve, 4th valve, working lights rear, working lights front, heating, full cab, air conditioner
5
5
Motor protection switch, star-delta switch, reversing switch
-Type: MDPPehb
-Setting range in amps: 4.9/5.5
-Price: per piece
-Number: 10x available
Hitu37ecy
-Weight: 2 kg
10
Commission 75649-62
Load capacity 0 kg
Drive type
Mast type Standard
B8xl02dhlw
Lifting height 0 mm
Overall height 2640 mm
Free lift 0 mm
forks 0 mm
technically very good
optically very good
tires_front
tires_rear
special equipment 3rd valve, 4th valve, working lights in front, heating, full cab, air conditioner
attachments: quick coupler
4
Motor protection switch, star-delta switch, reversing switch
-Type: NNWYehb 15
-Setting range in amps: 1.3 - 2.0
Cloqmgv
-Price: per piece
-Number: 10 pieces available
-Weight: 0.8 kg
1
Commission 46441-15
Load capacity 3800 kg
Drive type diesel
Mast type telescopic
B9vhlen9v2
Lifting height 6889 mm
Overall height 2450 mm
Free lift 0 mm
forks 0 mm
technically good
optically good
tires_front 460 x 70 x 24 air
tires rear 460 x 70 x 24 air
special equipment 3rd valve, working lights rear, working lights front, heating, soot filter, full cab, air conditioner
5
Motor protection switch, star delta switch
-Type: MYehb
Qlu0k2kks
-Price: per piece
-Number: 19x available
-Weight: 2 kg
5
Gear motor, electric motor
-Speed: 55 rpm
-Power: 0.18 kW
-Construction: B5 angle
-Diameter hollow shaft: Ø 19 mm
Yp3kqn97b
-Protection class: IP 55
-Dimensions: 315/130/H155 mm
-Weight: 6.7 kg
