Used Bubble Wrap for sale (848)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Cedpfx Aajzp H R Eorsrf Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Codoxdn Nrspfx Aarjrf Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: W0109111, working width: 1,400 mm, stack height: 1,800 mm, product height (max.): 80 mm, Automatic wrapping machine, Ream wrapper mid-speed wrapping of all metric and standard U.S. ream sizes including half-ream packages. Machine capable of wrapping paper reams ranging in dimensions from 297 x 420 mm (A3) up to 1000 x 1400 mm. Csdpfx Aoy Ufh Nearjrf The machine ensures maximum flexibility thanks to its quick changeover features. The reams are manually feed by the operator, who controls all the machine's operations. The reams are wrapped in polyethylene or kraft paper, pre-cut into the sheets required for wrapping. Afterwards, the reams are stacked and placed in the collection station. The set of rolls can be installed on either the right or left side of the machine upon request.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 09/2027, working width: 400 mm, conveyor belt width: 600 mm, type of input current: three-phase, total width: 790 mm, total length: 820 mm, total height: 1,300 mm, TOP Wrapping Machine Universum Kasper Model: HWM 40/60 for all types of dough pieces, such as corn twists, pretzels, and lye pretzels, etc. Universal combination wrapping machine for all types of dough to be wrapped and rolled into long strips Croissant wrapping machine with a long roller at the bottom robust technology machine is mobile connection: 400V, 16A CEE plug Crjdpfx Ajwc H R Iearof dimensions: 790 x 820 x 1300 mm (W x D x H) used machine, refurbished with warranty + spare parts service Options: with scraper service package delivery service maintenance contract spare parts box instruction and commissioning Visit our large exhibition of croissant wrapping machines!

Year of construction: 2026, condition: used, consisting of: 1 PAMMINGER Flyer 2.4 VA stretch wrapping unit, year of manufacture: 2009, serial number: M00812, 1 MESSERSI PR9 banding unit, year of manufacture: 2009, serial number: 3421, roller conveyor, protective enclosure, control system. Crjdpfxjzqzb Ie Aarsf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, working width: 180 mm, total width: 280 mm, total length: 475 mm, total height: 280 mm, DGUV certified until: 06/2028, type of input current: AC, conveyor belt width: 180 mm, NEW NEW +++ Roll Depositor +++ NEW NEW Dough weight: approx. 20 to 80 grams Capacity: max. 2000 pieces/hour Crjdpjqy A Swsfx Aarof Simple, robust technology Maximum roll width: 180 mm DGUV V3 tested – available only from us Connection: 230V Dimensions: 280 x 475 x 280 mm, W x D x H New machine, SAB certified 24 months warranty + spare parts service Optional: Delivery service Maintenance contract Service package Training & commissioning Leasing & rental service Other top-quality bakery machines in stock!

Year of construction: 2012, condition: excellent (used), Mobile pallet wrapper Crjdpezp R S Hsfx Aarof Inventory no. 3844 Manufacturer: Robopac Type: Robot Worker FRD Year of manufacture: 2012 Technical data (approx.): * Wrapping height max. 2200 mm * Max. width unlimited * Min. width approx. 600 mm * Travel speed adjustable * Film width 500 mm * Core diameter max. 76 mm * Weight approx. 340 kg * Equipped with new batteries * In very good condition!

Condition: used, Second-hand machine Features and technical specifications: - Film material: LLDPE - Film width 500 m - Max. roller diameter 250 mm - max. film thickness 35 µm - Roller core diameter 76 mm - Max. pallet length 1,675 mm Crjdszlbt Hopfx Aarsf - Max. pallet width 1,675 mm - Max. pallet height 2,200 mm - Max. pallet weight 1,500 kg - with access ramp - Dimensions approx. 3000 x 2000 x 3200 mm - Weight approx. 750 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2017, functionality: fully functional, Brüninghaus / Fromm / Siat WS 165 NOW pallet wrapper in fully functional condition, manufactured in 2017: Turntable diameter: 165 cm Overall height: 241 cm Pallet height: 210 cm Pallet weight: 2,000 kg The access ramp can be attached at the front, left, or right. Credpfxozpv Igs Aarjf The WS 165 NOW can be programmed with 10 different programs for individual products and pallets. The machine has 5 different operating modes: - Automatic mode, upward only, as well as up and down - Automatic mode, upward only, as well as up and down with a pause for a pallet top sheet - Manual mode The motor cover (see picture) is only loosely placed and is not attached. Shipping via a freight forwarder is possible after consultation. #8553

Condition: good (used), Banding machine Willy Heckmann WHU 200E The machine is like new, ready to work. Manufacturer: Willy Heckmann GmbH & Co. Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. Crjdpfx Aozmnidearof A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 12mm Power supply 230V Weight 200 kg Ask About The P

Year of construction: 2024, condition: new, functionality: fully functional, Semi-automatic horizontal orbital stretch wrapping machine designed for wrapping long products such as timber, aluminium profiles, plastic extrusions, pipes, textiles and similar materials. Equipped with infeed and outfeed roller conveyors for easy product handling. Modell Robopack Compacta 12 Production year 2024 Cjdpfjzkf Skox Aarsrf Installed power 1,5 kW Diameter 1200 mm Feeding roller Yes Outfeeding roller Yes Condition New (not used) Conveyors 2 pc. INCLUDED

Condition: used, Year of construction: 1991, Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-foldYear 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Crodpfx Aash Axgnsrof

Condition: used, Year of construction: 1995, machine/vehicle number: 9503264, Palettenstretchmaschine - Pallet Wrapping Machine W&W EFA5 1450Year 1995 - Serial-No. 9503264-943-3144 Online-Video-Inspection by Skype-Video Cjdpfx Ajh Axr Djarsrf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band Crsdjh Ax Hfepfx Aarof GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Palettenstretchmaschine mit 2,70 Stretchhöhe! - Pallet Wrapping Machine with 2,70m Stretch high. Palettenstretchmaschine - Pallet Wrapping Machine CYKLOP GL110/11 110 02 Cedpoy Apvgsfx Aarjrf Serial-No. 870315 Palettenstretchmaschine mit Auffahrrampe / Wrapping machine with ramp  Palettenstretchmaschine mit 2,70 Stretchhöhe Pallet Wrapping Machine with 2,70m Stretch high Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Csdpfxsywclwo Aarorf Control system: S7-300 Original technical documentation included. Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: used, Year of construction: 1995, Machine for palletizing cartons or bottles and wrapping with stretch film. Manufacturer: KRONES Codpoyrf Atsfx Aarerf Model: PALMASTER Year of manufacture: 1995 Set includes an OCTOPUS pallet stretch wrapper with pressing device. Used machines, still installed—as shown in the photos. Technical documentation included. A KRONES depalletizer is also available in the offer.

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data - Manufacturer: Kisters Maschinenbau GmbH - Model: Wrap Around Packer 420/50 - Machine Type: Wrap-around packer / secondary packaging machine - Year of Manufacture: 2001 - Capacity: up to approx. 50,000 bottles/hour Cjdpfx Aoy Sidvearjrf - Operating Hours: 16,976 h - Application: Packaging of PET one-way bottles - Previous Use: PET one-way beverage line - Current Status: Taken out of operation due to line reconfiguration - Bottle Formats: 0.33 l, 0.355 l, 0.5 l - Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats - Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 - inkl. shrink application for trays  - Listed Formats: - 0.33 l LNB 2x12 tray - 0.355 l LN 2x12 tray - 0.33 l LNB 4x6 tray - 0.355 l KN 4x6 tray - 0.33 l LNB 3x8 tray - 0.355 l LN 3x8 tray - 0.5 l LN 4x6 tray - 0.5 l LN 6x4 tray - 0.5 l LN 4x6 KLW full carton - 0.33 l LN 4x6 loose wrap-around - 0.33 l LNB 4x6 90° tray - 0.355 l LN 4x6 90° tray - 0.33 l BA 4x6 loose wrap-around - 0.33 l BA 3x4 loose wrap-around - 0.33 l Miller 4x6 loose wrap-around - 0.33 l Salitos 4x6 loose wrap-around - 0.33 l Vichy 4x6 tray cluster - 0.33 l LN 4x6 tray cluster - 0.33 l LN LCE 4x6 full carton - 0.33 l EW 4x6 export full carton - 0.33 l EW 4x6 export tray - 0.5 l EW 4x5 loose wrap-around

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  Csdpfx Aaow T Sthorsrf - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, Resta Automatic Mattress Packaging Machine: Integrated Compression and Decompression The Resta mattress packaging machine is an automatic packaging machine designed for the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with mattress compression followed by decompression, while also protecting it in a suitable film. Advantages of Mattress Packaging in Production and Distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated Compression: Mattresses are bagged in PVC or plastic film, without manual intervention. Easy Decompression: The mattress returns to its normal shape in the store or at the customer's location. Optimized Transport: Significant reduction in volume, with more space in the truck and in storage. Presentation for Sale: Final presentation of the mattress in suitable commercial conditions. Vacuum Packaging Machine: Protection and transport of the mattress. What truly changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, including PVC film and plastic film, and ensures an airtight seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatibility with Spring and Foam Mattresses This is particularly beneficial when your production involves both spring mattresses and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment can accommodate both bagged mattresses and compressible structures, which simplifies workshop organization. Spring Mattresses: Compression without damage to the springs, thanks to a progressive hydraulic system. Foam Mattresses: Adaptation tailored to the product, with rapid shape recovery after compression. Compatibility with PVC film and other specialized packaging films. Professional Sealing: Airtight closure of the film to protect the mattress during transport. Industrial Applications and Mattress Packaging Processes In practice, on an industrial mattress packaging line, this automatic Resta packaging machine integrates after the… Special Feature: Enables double, independent packaging (two separate bags) within the same footprint as a standard packaging machine, thanks to two superimposed polyethylene rolls. Also allows for single or customized packaging (two different rolls, automatic change according to programming). The feed conveyor and disconnectable press also allow for packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official Technical Specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Csdpfxjzmpvrs Aarjrf Power supply: 400V – 50Hz three-phase Available Options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for disposal of polyethylene waste

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -with 2 motors for cleaning from above and below -with oscillation -Swivelable Csdpfjb Sgzdjx Aarsrf - laterally adjustable -Height: adjustable -Number: 1x aggregate available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine Crjdpjgy T I Esfx Aaref -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable -Dimensions: 480/250/H490 mm -Weight: 29 kg

Year of construction: 1994, condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable Crjdpeu N Sggjfx Aarjf -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

Year of construction: 1995, condition: good (used), strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Waldys, drive unit for stretch wrapping machine model 55 -Motor: 4 kW / 80 - 16 rpm -Individual components: see photos -Dimensions: 640/570/H680 mm -Weight: 120 kg Crjdpfju Huubox Aarsf

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -Motor: 0.18 kW -Speed: 1400 rpm - laterally adjustable -Height: adjustable -Number: 1x aggregate available -Price: per piece -Dimensions: 270/440/H600 mm -Weight: 31.5 kg Cjdsb Sc Srspfx Aarorf