Used Buerkle for sale (46)

Condition: good (used), working width: 1,300 mm, plate width: 1,350 mm, Veneer Press Bürkle U140 4 intermediate plates Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm Heating medium - hot water Cooling - cooling circuit with pump and expansion tank 8 hydraulic cylinders Max. operating pressure: 348 bar Weight approx. 6500 kg Good condition. Hodpjxn Um Eofx Aftsfr

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, empty load weight: 13,200 kg, working width: 1,100 mm, workpiece height (max.): 35 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Working length: 2,350 mm Working width: 1,100 mm Max. machinable thickness: 35 mm Part dimensions max. Max. panel size: 1,100 mm × 2,350 mm Film width min. Min. film width: 1,300 mm MACHINE DETAILS Hjdpjxyi Rpofx Aftofr Installed power: 38 kW Dimensions & weight Heating plate dimensions (W × L): 1,400 mm × 2,600 mm Usable surface (W × L): 1,180 mm × 2,430 mm Weight: 13,200 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 013531, An efficient and economical lamination process is realized with the SMARTLAM CHK hot-cold transfer press system (Twin Stack series). The SMARTLAM CHK is a twin-stack system that offers higher efficiency and increased output compared to conventional single-stack systems. By using two presses—one for heating and one for cooling—cycle times and energy consumption are significantly reduced. Depending on the material and laminate structure, up to 4 cycles per hour can be achieved with the SMARTLAM when processing 10 laminate layers per level. It is possible to place multiple laminates side by side in a single cassette. In alternative short-cycle test operation, approximately 1–2 cycles per minute can be achieved with one laminate layer per cassette (without vacuum and without a pressurized preheating phase). Hedpfjxwdmaex Aftefr

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Hjdpextfgysfx Aftofr

Condition: excellent (used), Year of construction: 2016, I sell the 2-head 2-lamp UV-drying tunnel Burkle UV2 1300 Year 2016 Working width 1300mm. Total length 2,80m Total power 36,6kW 2 Lamps GA 120 W + HG 120 W Hfjdpjt S D U Tjfx Aftsr Very good condition, available immediately.

Condition: excellent (used), Burkle shelf press Shelf length 220 cm, width 125 cm Clearance between shelves 39 cm Nice aluminum shelves Electric heating Piston diameter 70 mm, 4 pistons Safety switch - pull cord Pump motor 0.75 kW Pressure 2.9 kg/cm² Sturdy, compact machine Dimensions 140 x 270 x h-180 cm Weight approx. 2400 kg Machine in stock, can be tested, in very good condition Hsdpfxsxn Iiye Aftsfr Loading included in the price

Condition: like new (used), Year of construction: 2018, operating hours: 1,321 h, functionality: fully functional, Burkle PUR Laminating E.A.S.Y-Line is laminating line suitable for various applications, including manufacture and lamination of panels, coating of panels, manufacture of lightboards, composite boards and insulation elements. Line can be extended with additional working options (not included !) and additionally adjusted to Your production needs - Single-sided coating of PUR and hot melt glues for working widths from 1300 to 1600 mm (double sided and larger widths upon request) - Press calender with solid and welded machine frame - Large-dimensioned bearing, upper roller with precision lifting gear - Application quantity 40 to 120 g/m2 Hfjdpexltz Aofx Aftor Working Widths 1300 - 1600 mm Board Lengths 2450 mm, 3050 mm, 3660 mm, 4800 mm

Condition: used, Year of construction: 2011, 2 x belt curve conveyors 90° Hjdotpi Dnjpfx Aftjfr Manufacturer: Bürkle Model: ST22 KDD 90°/1600/1700R Working width 1300 mm

Condition: used, Paint casting machine, paint casting machine, paint casting station -Paint casting machine -Manufacturer: Burkle -Max. Casting width: 1290 mm -Adjustable casting gap: via handwheel with display -hydraulic: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm Hfsdpfx Afjc R Iyastjr -Weight: 386 kg

Condition: used, Membrane press with double work surface Cutter for cutting the sheet to be applied - Working length: mm 2350 - Working width: mm 1100 - Maximum workable thickness: mm 35 - Installed power: 38 kW - Weight: 13200 kg Hfodpfx Aew Dfkcjftjr

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Hjdpjvxa T Aofx Aftjfr Working width 1300mm. Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately.

Condition: ready for operation (used), Two identical Burkle curved belt conveyors are available. Effective width: 400mm, length: 1800mm, feed rate: 37m/min, curvature: 90°. Documentation available. On-site inspection is possible. Hfodpfxewydg Is Aftor

Year of construction: 1995, condition: good (used), UV putty roller Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7250 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Hedpfsg E Uf Sox Aftjfr Stock No: 2000353

Condition: good (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture 1997 System for coating smooth and shaped MDV parts with thermoplastic films from a roll or as cut-to-size, for PVC, PP, high-gloss PVC, ABS film. Suitable for the thermoforming or membrane process. Max. part size 1250x 2550 mm/ Part thickness 6-35 mm Hsdjw Enl Sjpfx Aftofr Heating plate dimensions 1600 x 2800 mm Max. heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw with 2 aluminum tables and reserve table Weight 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hjdpfx Aet Dx U Ssftsfr Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: good (used), functionality: fully functional, heating capacity: 14 kW (19.03 HP), Machine types: U 60 Machine no: 78/3103137 Power: 3/380V/50Hz Total power 14 Kw Press area: 2200X1250X400mm Hfodpfxowb Skke Aftsr

Condition: excellent (used), Year of construction: 2002, I sell the 1-cylinder roller coater BURKLE SAS1300. Working width 1300mm Very good condition. Fully working. Available immediately. Hfodpfx Ajt S D Umeftor

Year of construction: 2011, condition: excellent (used), BURKLE PROCESS TECHNOLOGIES Düsentrockner-Anlage DURCHLAUFTROCKNER TRDUE 700 Nozzle Dryer System Hfedpfx Afod R Sb Ijter one-sided drying of various media on plane parts parts can be heated by the built-in IR emitter

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Hsdpov Hw Hcsfx Aftofr Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth Wall Machine for covering flat and formed MDF furniture components with thermoplastic foils. Basic machine data: • Electrical connection power: approx. 28 kW (without optional components), • Operating voltage: 400 V, 50 Hz, 3-phase, • Control voltage: 24 VDC, • Required air pressure: min. 6 bar, • Air connection diameter: min. 1 inch, • Required air volume: max. 2880 l/min, • Air consumption during pressing process: ◦ 4 bar forming pressure: approx. 720 l/cycle, ◦ Chamber filled to 50%: approx. 360 l/cycle. Operating side: in the direction of feed, right-hand side. Electrical equipment: • In compliance with DIN/VDE (EN 60204) standards, • Electrical documentation according to VDE, • Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue. Working materials: • Material applied: ◦ PVC foils 0.30–1.0 mm, ◦ High gloss foils 0.50–1.0 mm, ◦ PET foils 0.35–0.60 mm. • Material processed: ◦ MDF board (smooth or profiled surface), ◦ Board temperature: approx. +18°C, ◦ Board moisture content: approx. 6–8%, ◦ Board density: approx. 750 kg/m³. Technology: • Thermal forming without membrane, • Working area: 1330 x 2430 mm, • Maximum workpiece size: 1250 x 2350 mm, • Minimum foil width: 1400 mm, • Workpiece thickness: 6–35 mm (depending on part geometry). STOLMAT Spray Booth Wall 1. Purpose of the device: • Wall for extracting paint dust and vapors. • For capturing dust generated during spray application of paints and lacquers onto furniture components. • Designed for use with high-efficiency spraying equipment (spray gun). • Filtration efficiency >96%, eliminating the need to clean exhaust ventilation ducts. Hsdpswfz Nkofx Aftsfr • Equipped with side covers ("tapacze") to improve extraction efficiency. 2. Technical data: • Dimensions (LxWxH): 2500 x 2130 x 700 mm, • Fan type: duct fan 500, • Fan capacity: max 7500 m³/h, • Max pressure: 400 Pa, • Fan motor power: 1.85 kW, • Voltage: 230/400 V, • Number of fans: 1 unit, • Filtration surface (1st stage – cardboard filter): 4.80 m², • Filtration surface (2nd stage – PS fiber filter): 2.50 m², • Dust filtration efficiency: >96%. 3. Technical description: • The spray extraction wall is made of galvanized steel sheet, 1.5 mm thick. • Wall elements are connected by screwing and sealed with acrylic mass. • The fan is mounted on a wall bracket. • Side covers ("tapacze") made of galvanized steel sheet. 4. Dust filtration parameters: • Cardboard filter (labyrinth type): ◦ Class G3 (DIN 53438, EN 779), ◦ Thickness: 60 mm, ◦ Flow rate: 1200–3800 m³/h/m², ◦ Filtration efficiency: 90–98%. • PAINT STOP filter: ◦ Flow rate: 2500–6300 m³/h/m², ◦ Filtration efficiency: 93–97%.

Condition: excellent (used), Year of construction: 1996, I sell the 1-cylinder roller coater BURKLE SAL. Working width 1300mm Hfodpst S Eb Usfx Aftjr Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Hfsdpfsv I Ur Sjx After Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Year of construction: 1998, condition: excellent (used), I sell the 1-cylinder roller coater BURKLE SAL1300. Working width 1300mm Very good condition. Fully working. Available immediately. Hsdpfx Afei Euqqjtofr

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Hedpfx Ajv Hn N Ujftsfr Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Year of construction: 1995, condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Hfodpfog Hr A Ijx Aftjr Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000360