Used Cantilever Rack Shelf for sale (4,409)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Kdjdpfxsmhhyao Aiijr When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm Kedszuxy Aopfx Aiisdr - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Second-hand, double-sided, freestanding cantilever racking designed for the storage and organised retrieval of long goods and materials. The structure is suitable for professional use in warehouses and industrial premises. Technical data: - Length: ~ 6,000 mm Kodpfxjzr E Nfs Aiiodr - Arm: 650 mm - Height: 3,000 mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Kjdjmhhf Sspfx Aiisdr - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm Kdedpfx Aiszuxcweior - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Mesh shelf for pallet racking - new. The mesh shelf fulfils the function of filling the space between the beams of the pallet rack. It is made of high-quality zinc-coated metal. The grid creates a picking level from which the storekeeper can retrieve assortments in bulk or in boxes. It has 3 or 4 reinforcing crossbars (omeges). Mesh shelves are widely used for: storing and sorting as well as displaying goods in warehouses, wholesalers. The use of mesh panels makes it possible to manage space in the warehouse, to maintain order. Thanks to their light steel structure, mesh shelves are suitable for self-assembly, they guarantee air flow and access to light, thanks to which they protect stored goods against dampening. The offer applies to the mesh shelf with a load capacity of 300kg NEW (MTP004701): Width: 88 cm. Depth: 110 cm. Load capacity: 300 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price 9,25 euro per piece. This offer applies to the mesh shelf with 500kg load capacity NEW (MTP003950): Width : 89 cm. Depth: 110 cm. Load capacity: 500 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price: EUR 10.65 per piece. This offer applies to the mesh shelf with load capacity of 500kg NEW (MTP000707): Width : 88 cm. Depth: 80 cm. Load capacity: 500 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price: 11.25 euros per piece. This offer applies to the mesh shelf with load capacity of 1000kg NEW (MTP004268): Width : 88 cm. Depth: 110 cm. Load capacity: 1000 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price: €13.85 per piece. Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. Kdedpfx Asu Ttgmsiier To check wholesale and retail prices within Poland, please contact us. * Large quantities available immediately. * Quick dispatch to the desired location. * Transport costs are not included in the offer. * Transport throughout Europe possible.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. Kdsdpfxoqt Dmye Aiijr We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Cantilever rack, heavy-duty rack Kedpfxsr Ngpxo Aiiedr -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Kjdjnwmwvjpfx Aiiodr Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: good (used), Year of construction: 2000, Offer 25521 Double-sided long goods – cantilever racking without contents Kdodpfx Aisx R Si Eeior Technical specifications: - 2 pieces of double-sided cantilever racking, each consisting of - 5 uprights with boltless system, height-adjustable storage arms - Length per rack approx. 4150 mm - Total length approx. 9300 mm - 130 storage arms - Upright height each approx. 6000 mm - Width of upright + support arms approx. 1700 mm - Max. arm load approx. 400 kg - Max. load per upright approx. 5000 kg - Axle distance between rack sections connected with diagonals approx. 1.0 m - Increment for arm height adjustment 125 mm - Arm dimensions L 700 x W 90 x H 70 mm - Upright dimensions W 250 x H 100 mm - Weight per upright approx. 400 kg - Weight per arm approx. 10 kg

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) Kdsdpomidyfjfx Aiijr - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), Year of construction: 1999, functionality: fully functional, total width: 1,060 mm, shelf height: 2,250 mm, support length: 500 mm, -KOM 3156- Offered here is an SSI Schäfer plug-in shelf rack in good condition. The maximum bay load is 1,200 kg, and the maximum shelf load is 200 kg. In total, we have 23 identical racks available. The rack consists of: - 2 x Schäfer storage bins LW 512 - 2 x Schäfer storage bins LW 530 - 3 x standard shelves Rack dimensions: Height: approx. 2,250 mm Depth: approx. 500 mm Width: approx. 1,060 mm Height of storage compartments (from bottom to top): 1 x lower standard shelf: approx. 200 mm high Kdodpoxqc Txsfx Aiisr 2 x large Schäfer storage bins: approx. 350 mm high 1 x middle standard shelf: approx. 200 mm high 2 x small Schäfer storage bins: approx. 200 mm high 1 x upper standard shelf: approx. 300 mm high The height of the Schäfer storage bins can be individually adjusted using the mounting brackets (see last photos).

Year of construction: 2019, condition: like new (used), We offer both used and new cantilever racking and pallet racking systems. We will gladly prepare a customized quote for you. To do so, please provide us with the following information: - Length and height of the desired racking, Kdedshr D Dtjpfx Aiier - Number of shelf levels, - Shelf load capacity. If you have any questions, please do not hesitate to contact us. The images are example photos.

Condition: good (used), total length: 40,000 mm, 40 linear meters of used Schäfer R3000 shelving 📋 Consists of: • 31 x pre-assembled frames / approx. 250cm high / 60cm deep / new • 150 x shelves / 128cm long / 60cm deep / 100 kg load capacity / used • 10 x cross braces • Color: galvanized, grey • Condition: very good, see photos 💰 Price € 3,890,- net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe, on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10050 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION Kdodpoq Dklljfx Aiior For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service with our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Colour: Grey Empty weight: 1.500 kg Length: 550 cm Price: On request - Documentation available: No - CE certificate present: No - Type of rack: Double - └ Load capacity per side [kg]: 3000 - Number of uprights [pcs]: 10 - Number of beams [pcs]: 80 - Total load capacity per upright [kg]: 3000 - Load capacity per arm [kg]: 1000 - Arm length [mm]: 1220 - Upright height [mm]: 5500 - Foot length [mm]: 1220 - Width between uprights [mm]: 1500 - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kdodpfx Aszba Ensiier Koen van Lent

Condition: ready for operation (used), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm Kedpfx Aszuxc Doiiedr - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: 1229.00 € net incl. delivery 1462.51 € gross incl. delivery You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: good (used), Technical Data for Pallet Racking System: Racking System: Mecalux Technical Data for Configuration: Number of Racking Rows: 1 unit Length per Row: 9,845 mm Number of Bays per Row: 5 units Number of Levels plus Ground Level: 2 units Capacity Data: Pallet Spaces per Bay: 6 units Kdjdpfxsvzam Ie Aiijr Pallet Spaces per Row: 30 units Total Pallet Spaces: 30 units Scope of Delivery: 06x Pallet Rack Frames, used Material finish: Sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. horizontal and diagonal bracing, baseplates The frames are pre-assembled (bolted lattice construction) 2,000 mm high 1,100 mm deep 20x Pallet Rack Beams, new Material finish: RAL 2001 orange Beam type: TB-S 100 Box section: 100 x 50 mm Clear span: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 40x Integrated Safety Pin, new To secure beams against unintentional uplift 24x Wedge Anchor, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shim Plate, used Material: fully galvanized For leveling frames installed on uneven floors 01x Load Capacity Sign With specifications for bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your Contacts in Our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. If transport or shipment of the item is required, additional charges will apply, which can be quoted separately depending on delivery location and scope.

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm Kdodpfx Aoyu Um Tjiijr -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg

Condition: used, Year of construction: 2018, Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side Kdedpsryx Tzjfx Aiijr -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 4,474 kg, shelf height: 5,585 mm, total length: 12,600 mm, total width: 2,720 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, maximum load weight: 900 kg, load capacity per stand: 900 kg, Equipment: double-sided, Double-sided cantilever rack in painted steel, RAL 5015, for indoor use, OHRA H60K system. Used material, sold as seen and liked. Composed of: 5 columns and bases IPE240, height 5585 mm plus extensions (total height approx. 7000 mm), 3 columns and bases IPE220, height 4985 mm plus extensions (total height approx. 5500 mm), 2 columns and bases IPE220, height approx. 4285 mm. Rack length: 12,600 mm; width: 2,720 mm, with L-shaped rails at 2,750 mm. Includes 110 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg per arm. Complete with bracing, connecting hooks, and bolts (excluding floor anchoring). L-shaped perforated steel guide approx. 30 meters. Material is disassembled, strapped, and ready for transport (transport at buyer’s expense). Kjdpsygmz Hefx Aiisdr Transport and VAT not included in the price.

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving 📋 Consisting of: • 24 x frames, pre-assembled / approx. 250 cm high / 80 cm deep / new • 92 x shelves / 128 cm long / 80 cm deep / 250 kg load capacity / used • 8 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €4,320 net, excluding VAT. Kdjdpfx Aisd Nf Svoier • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment • Product number: P2601 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale, are reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used and new heavy-duty racking Description: Are you looking for high-quality storage racks to buy? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ READILY AVAILABLE: • Over 10,000 linear meters of racking systems available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a real all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and handover in a clean condition. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 17,200 mm Number of bays / row of shelves: 09 pcs. 1,800 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 54 pcs. Total pallet spaces: 54 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,400 kg Ksdpfx Aijt E Azfoisdr The scope of delivery includes: 10x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P173 Profile dimensions: 100 x 75 x 2.00 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 36x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 80 x 42 mm Truss type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 72x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 40x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 30,700 mm Number of bays / row of shelves: 9 units of 3,300 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes 10x pallet rack uprights, used Material color: blue Upright type: A 103 Upright profile dimensions: P 100 x 79 x 3 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,000 mm high 1,100 mm deep 36x pallet rack beams, used Material color: orange Box profile: 120 x 50 mm Beam type: TB-S 120 clear width: 3,300 mm 72x integrated locking pin, used Material color: orange For securing the longitudinal beams against unintentional lifting out 40x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Kjdpetukqisfx Aiiodr Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 3,600 kg, shelf height: 5,585 mm, total length: 14,000 mm, total width: 2,720 mm, total height: 5,585 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, load capacity per stand: 900 kg, shelf length: 14,000 mm, Equipment: double-sided, DOUBLE-SIDED CANTILEVER RACK IN STEEL, PAINTED RAL 5015, FOR INDOOR USE, OHRA K60K SYSTEM. USED MATERIAL SOLD AS SEEN. COMPRISED OF: - 06 uprights and IPE240 bases, height 5585 mm, max load per upright 3600 kg - 03 uprights and IPE220 bases, height 4985 mm + extensions, max load per upright 3600 kg - 02 uprights and IPE220 bases, height 4285 mm, max load per upright 2700 kg Rack total length: 14,000 mm. Total width: 2,720 mm, or 2,750 mm with L-shaped guide rails. 88 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg each. INCLUDES cross bracing, connector hooks, and bolts (EXCLUDES floor anchoring bolts). Solid steel L-profile guides, approx. 30 linear meters. Material is dismantled, palletized, tied, and packed, ready for transport. Transport and VAT not included in the price. Kdjdpfoygddfex Aiior

Condition: excellent (used), Cantilever rack, double-sided, 10 levels, arm extension 380 mm, extendable by 220 mm, height 2420 mm, total depth 1000 mm, length approx. 2700 mm, cantilever arms made of 80 mm U-steel, very robust design, the rack is hot-dip galvanized, weight 1190 kg, rack disassembled for transport. Kdodow Icyuspfx Aiisr