Used Car Clamping for sale (17,168)

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Ganter, Aluminum Foot Clamp Nsdpfx Aoznu Szolajcw -Type: GN 473 B12 -Number: 35x holders available -Price: per piece, minimum order 3 pieces -Dimensions: 38/35/H25 mm -Weight: 0.033 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp, foot clamp holder -Manufacturer: Ganter, Aluminum Foot Clamp -Type: GN 473 B20 Nodpfx Aljznu Snsascw -Number: 28x holders available -Price: per piece, minimum order 2 pieces -Dimensions: 50/44/H35 mm -Weight: 0.076 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete Nodpfx Aloznu Agjascw -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc.

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece -Manufacturer: Rose Krieger, Flange clamp pipe connector flange, aluminum, one-piece for round tubes -Type: Size 12 mm Njdpfx Aeznt Dijlajcw -Number: 11x holders available -Price: per piece, minimum order 2 pieces -Dimensions: 50/35/H41 mm -Weight: 0.1 kg/pc.

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Overall height: 590 mm - 360° rotatable - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Weight: 41 kg Njdpezpbrkofx Alaocw Good condition

Condition: used, Year of construction: 2000, length 1000 mm width 1250 mm Nedpjzpbmnofx Alascw height 2600 mm

Condition: used, Year of construction: 2000, length 800 mm width 1250 mm Nodjzpbmhjpfx Alajcw height 1500 mm

Condition: used, Year of construction: 2000, length 800 mm width 800 mm height 1000 mm total power requirement 0 kW weight of the machine ca. 700 kg Ncsdpfx Aoznnd Dolaew dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 2000, length 800 mm width 1000 mm height 1300 mm total power requirement 0 kW Ncedpfx Aoznndqjlasw weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm

Condition: used, axle configuration: 2 axles, first registration: 01/2001, loading space length: 13,680 mm, loading space width: 2,460 mm, loading space height: 3,080 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 265/70R19,5, color: other, Year of construction: 2001, Equipment: ABS, Number of axles: 2, twin tires, unladen weight: 6800 kg, gross vehicle weight: 33000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, body construction year: 2001, axle type: ROR, 2 AXLE MEGA = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 265/70R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; tire tread depth left inner: 6 mm; tire tread depth left outer: 6 mm; tire tread depth right inner: 4 mm; tire tread depth right outer: 7 mm Axle 2: Twin tires; tire tread depth left inner: 6 mm; tire tread depth left outer: 6 mm; tire tread depth right inner: 8 mm; tire tread depth right outer: 7 mm Weights Unladen weight: 6,800 kg Ncsdpfx Aezmtc Nolaew Payload: 26,200 kg GVW: 33,000 kg Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Ncedpfx Ajthuzpjlaow Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Ncodpfx Aleznn Hleaow Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: used, weight / kg taper MK / Ncedpfszmy Swex Alaew

Condition: good (used), mileage: 460,302 km, power: 176 kW (239.29 HP), first registration: 04/2008, fuel type: diesel, tire size: 265/70R17,5, axle configuration: 4x2, wheelbase: 4,860 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 8, emission class: euro4, suspension: steel-air, total length: 8,700 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 5,200 mm, loading space width: 2,430 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8359 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 140 liters, Tow hitch, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling force: 350 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Flashing lights, Engine power: 176 kW (236 Hp), Fuel: Diesel, Euro: 4, Transmission type: Manual, Gears: 8, Clutch pedal, Power steering, ABS, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Terex 65.2 - A 2 L, Crane year of manufacture: 2008, Crane lifting capacity: 6000, Maximum load: ?, Number of outriggers: 2, CE-certified, Control position: Right-hand side control, Crane position: Behind the cab, Sliding: 2, Hydraulic additional connection: none, Load hook, HYDRAULIC RAMPS // ATLAS 65.2 A2L WITH REMOTE // MANUAL GEARBOX 8+1 // AIRCO // 6 CYL. = Additional Information = Axle configuration Tire size: 265/70R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 8,359 kg Payload: 3,631 kg GVW: 11,990 kg Functional Crane: Terex 65.2 - A 2 L, Year of manufacture 2008, behind the cab Height of loading area: 107 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Njdpfxezcvf Tj Alaocw License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Nedpfxob Evnke Alaocw A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg Njdezbhqxopfx Alaecw

Condition: good (used), Code: 0455 Brand: VALENTINI - ITALY Model: C 2 P Pneumatic clamp desk for drawers, furniture, frames, cabinet doors and various Technical data: Worktop dimensions 2500 x 1300 mm Worktop height from floor 720 mm N° 8 thrust cylinders with adjustable stroke N° 9 support fences Cylinder thrust 586–790 kg N° 2 control panels Operating pressure 6/8 atm Ncjdpfx Aeznk Ncolasw Overall dimensions mm 2600 x 1300 x 900 h Weight kg 1100

Condition: used, maximum load weight: 2,735 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,260 mm, loading space width: 2,040 mm, total width: 2,100 mm, total height: 990 mm, A23 GW26M0147488 High-loader with manually operated hand winch (removable), fitted with overrun brake, wooden floor plate, rear drop-leg supports (accessory), 2 loading ramps behind the license plate... and many more features. Njdpfxoy S Nkpe Alajcw Subject to errors and prior sale.

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone Ncjdpfx Aezc N Axslajw 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Ncedpozhub Asfx Alaew Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) Ncsdpfezc N H Dex Alasw 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: new, Model: TERRA 54HV CT Ncedpovu Stmefx Alaew Serial number (SN): T54HV-IT1-3320-065 Year of manufacture: 2020 Electrical specifications: Input: 400 V / 3P + N~, 112 A, 77 kW, 50 Hz DC output (DC output CCS2): 150–950 V DC, 0–125 A, 50 kW AC output (AC output): 400 V / 3P + N~, 32 A, 22 kW, 50 Hz

Condition: excellent (used), functionality: fully functional, mileage: 450,795 km, power: 132 kW (179.47 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 5,145 kg, maximum load weight: 2,345 kg, overall weight: 7,490 kg, axle configuration: 4x2, next inspection (TÜV): 06/2027, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2013, Equipment: trailer coupling, MAN TGL 8.180 / Double-decker / Winch / Blyss DS12VA • Manufacturer: MAN • Type: TGL 8.180 • Mileage: 450795 km • First registration: 10/18/2013 • Power: 132 kW / 179 hp • Transmission: Manual transmission • Air conditioning • Body: Blyss DS12VA • Ramps, 220 cm long • Manually extendable and lockable • Platform on top, 400x220 cm • Load capacity approx. 1600 kg • Drive: Electric-hydraulic • Winch with wireless remote control, electric • Tow hitch • Euro: 5 • MOT (TÜV): June 2027 • Unladen weight: 5145 kg • Payload: 2345 kg • Permissible total weight: 7490 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions. Ncodszl U Scopfx Alasw

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: Test plate with support ribs -Clamping surface: 300 x 200 mm -Sheet thickness: 10 mm Ncodpozldm Njfx Alajw -Plate: with supporting ribs -Transport dimensions: 446/200/H74 mm -Weight: 11 kg

Condition: good (used), mileage: 606,394 km, power: 154 kW (209.38 HP), first registration: 02/2020, fuel type: diesel, tire size: 245/70R17,5, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,830 mm, total width: 2,550 mm, total height: 3,200 mm, loading space length: 8,450 mm, loading space width: 2,480 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Payload: 5730 kg, Tare weight: 6260 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 200 liters, Unbraked trailer load: 750 kg, Braked trailer load, middle axle: 3500 kg, Fifth wheel coupling: Fixed, Winch capacity: 255 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Grey, Metallic, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Engine power: 154 kW (207 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 6, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, System type: ., Pump, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 3 LOADER - TIJHOF - CLEAN = Additional Information = Transmission Transmission: ZF, 6 gears, Automatic Axle Configuration Tire size: 245/70R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 10 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Tare weight: 6,260 kg Payload: 5,730 kg GVW: 11,990 kg Functional Loading platform height: 70 cm Pump: Yes Maintenance APK (technical inspection): valid until 12.2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €881 per month (default, 60 months); Inquire for more information and conditions Identification License plate: 37-BPH-9 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages Ncsdpozk Ulgofx Alasw • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.