Used Clamping Heads for sale (16,357)

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm) Bwjdpfx Akoyi Hm Uexol

Condition: used, Hohner stitching heads 48/5S Bwjdpfx Aoxwxhrjkxel condition as shown in the photo

Condition: used, functionality: unexamined, Ferwood Code: RU0008921 - Manufacturer Code: 6714A0729 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Bedpfxov Hgu Aj Akxewl

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Bsdol Dw Nxjpfx Akxswl cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates prompt collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of clamping jaws in various designs and sizes! MACHINE DETAILS Bwsdpfjyn Di Dex Akxel Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 100 mm Weight: 100 kg External reference: Pieper - Lot 129

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Bwjdox A Hfvspfx Akxsl Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Bwjdpfex A Hfpsx Akxol Max length workable: 2600 mm Max height workable: 1300 mm

Condition: good (used), Year of construction: 2017, operating hours: 15,940 h, load capacity: 3,500 kg, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, empty load weight: 5,500 kg, mileage: 15,940 km, TRIPLEX forklift brand STILL, year 2017, capacity of 3,000 kg; Lifting height of 6,040 mm; Equipped with FREELIFT; Equipped with SIDESHIFT; Clearance height 2,725 mm; Equipped with Cascade clamp; Clamp dimensions: 219 mm inner width; 150 mm height; 130 mm width; 200 cm height with bracket; clamps up to 41 cm; NON-MARKING tires; Battery from 2019 with external charger; Automatic filling system; Schedule an appointment for a test drive; Video coming soon. Bwsdpjx A Ev Hofx Akxol

Condition: good (used), Clamping angle, clamping aid Bwjdey Iwp Eopfx Akxsl -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

Condition: good (used), Clamping angle, clamping aid Bwjdpfx Aoy Iwnhokxsl -Clamping angle: for workpiece clamping -Wall thickness: 35 mm -Groove: 20 x 60 mm -Dimensions: 275/160/H308 mm -Weight: 28.6 kg

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg Bwsdpjy Iwkcefx Akxjl

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping Bwsdpfx Ajy Iwadskxel -Wall thickness: 24 mm -Dimensions: 300/205/H635 mm -Weight: 62 kg

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable Bjdpfx Asy Ix Ngekxowl 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable

Condition: excellent (used), Year of construction: 2002, Veneer saw Mayer FH2-3120, precision cut saw with jointing unit (planing unit) and veneer stop table Robust Mayer machine construction A video of the machine in operation can be sent on request. For splinter-free and tight joint cutting of veneer, including thick-cut veneer Max. cutting length: 3100 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easily guided saw unit running on linear guides Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor: 1.8 kW, milling unit: 1.0 kW Motors can be conveniently switched on at the handle, operating only when needed HM-tipped fine cut blade, sharpened Planer head Z4, fitted with new carbide reversible knives Practical front veneer tray, extendable for planing unit Dust extraction port 100 mm with extraction duct Extraction hoses and V-belts replaced Compressed air maintenance unit replaced CE marking Operating manual Onboard tools Original paintwork, only a few spots touched up Approx. dimensions: 4350 x 1700 x 1400 mm (L x W x H). Weight approx. 800 kg. Bodpfx Ajyug Hrokxjwl The machine can be demonstrated on site by prior appointment. We only offer machines that are ready for demonstration from our warehouse. See "More offers from this seller."

Condition: new, Year of construction: 2026, functionality: fully functional, KRAFT FB-15/20/25/30 Facing Lathe – Factory New · 1,500–3,000 mm Face Plate · CNC or Conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES UP TO 2 TONS (OVERHUNG) The KRAFT FB Series is designed for cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four models cover swing diameters from 1,500 to 3,000 mm and permit overhung workpiece weights up to 2 tons, ideal for single-part and medium batch production. Available as conventional or CNC models (Siemens, Fanuc, or Fagor), with or without tailstock, and with longitudinal or cross beds. KEY FEATURES Heavy-Duty Construction - Machine bed cast in one piece from MEHANITE, bed width 450 mm, heavily ribbed - Hardened and stress-relieved bed slideways - Ensures durable, highly precise machining without deformation High-Precision Main Spindle — G1 Accuracy Class - Induction hardened, spindle bore up to 230 mm (option) - Compact spindle housing, widely ribbed for stability Powerful Drive - Spindle motor 22 kW (29 kW option), up to 600 rpm, high torque - Infinitely variable spindle speed as standard Bwodpfx Aec Txdhekxsl CNC-Ready Ex Works - X/Z servomotors by Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Overhung Workpiece Machining — The Facing Lathe Advantage - Workpieces are clamped directly on the spindle head, no tailstock required - Optimized for flat, disc-shaped components with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · Constant cutting speed · PARAT toolholder · C-axis & driven tools/milling unit · Tailstock · Spindle bore Ø 230 mm · 29 kW spindle motor MACHINE DATA — FOUR MODELS KRAFT FB-15 - Swing diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, Dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, Dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, Dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, Dimensions: 3000 × 3200 × 3350 mm COMMON SPECS FOR ALL SIZES Turning length: 330 mm · Max. workpiece length: 450 mm · Bed width: 450 mm · Overhung workpiece weight: max. 3,000 kg · Cross slide width: 250 mm · X travel: 330 mm · Spindle bore: 155 mm (230 mm opt.) · Spindle nose: A2-11 (A2-15 opt.) · Spindle taper: MT7 · 4 spindle speed ranges · Spindle motor: 22 kW (29 kW opt.) · Rapid traverse (X/Z): 6/8 m/min · 4-position tool turret, tool shank 32 × 32 mm CUSTOMIZED TO YOUR REQUIREMENTS Tell us your specific application — workpiece range, required accuracy, preferred CNC system — and we will configure the FB Series to your needs. Attractive leasing and hire-purchase conditions through our partners. Delivery including installation, commissioning, and operator training available on request.

Condition: good (used), Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm Bwjdpfx Aeb Uhn Njkxel -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Condition: good (used), Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount -Dimensions: 910/1120/H510 mm -Weight: 365 kg Bwjdpfx Aoy H Ivmokxjl

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D Bjdpfxsy H Itrs Akxowl -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Bjdpfxjy H Itls Akxjwl -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg

Year of construction: 2023, condition: ready for operation (used), This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information. • Item: FSW head (Friction Stir Welding head) • Quantity: 1 Bwodpey Iamyofx Akxol • Description: Friction welding equipment to install directly in a milling machine

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products Bwedjyazywjpfx Akxol - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Model: IV2-G500CA Bsdjx Hyt Rjpfx Akxowl Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Connection via Keyence IV2 connection cable (not included) Scope of delivery: 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Spindle mount: MT 3 Swivel range: +110° / -20° Weight: 26 kg Bwodoyv Dy Tepfx Akxol

Condition: used, table length 1200 mm table width 1200 mm table height (lateral area) 200 mm weight 504 kg dimensions of the machine ca. 1200 x 1200 mm New price approx. 4.000 euros Special price on request Product description - high-quality steel S355J2 N plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures Bwsdpjy Erx Ajfx Akxjl The welding tables are provided with a scale as standard. Plasma-nitrided design : - Protection against rust / scratches / welding spatter adhesion - more corrosion resistant / higher load capacity Features: - 28 hole pattern / dimensions 1200 x 1200 x 200 mm - plasma-nitrided version (750) with scale - incl. 4x foot basic equipment

Condition: used, table length 2400 mm table width 1200 mm Bwjdpfx Akey Erxpsxsl table height (lateral area) 200 mm weight 824 kg dimensions of the machine ca. 2400 x 1200 mm New price approx. 4.500 euros Special price on request Product description - Table top with system holes D28 - in double grid 100 x 100 mm - 3-row hole pattern on the table sides - All system holes with protective countersink - Optimized table outer edges - Improved table reinforcement . due to additional cross ribbing - Fine scaling with millimeter graduation Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - incl. 4x foot basic equipment (height-adjustable)