Used Clamping Shaft Screen for sale (17,987)

Condition: excellent (used), Year of construction: 2012, Screen 8900 S CTP imaging system with M-AL automatic feeder. Fgjdpfj Ag Uqnjx Am Eoi XMF Gateway software.

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm Fedpfxjwhza Ue Am Eegi - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Shaft length: 1800mm 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. Fsdez Rmt Uopfx Am Eogi This shredder has always been used for shredding car tires.

Condition: good (used), Complete used Tiflex textile screen printing setup for sale: a full manual screen printing line, ready to print t-shirts, sweatshirts, hoodies, polo shirts and garments with plastisol inks. This Tiflex screen printing equipment covers every step of the process: multi-colour printing on a 6-colour manual press, intermediate flash curing between colours, then final curing in an infrared conveyor dryer. A practical solution for textile decorators, garment printers, print shops, apparel brands and new screen printing workshops. 1. TIFLEX 2368000LC MANUAL SCREEN PRINTING PRESS (6 COLOUR, 6 STATION CAROUSEL) - Rotary manual press, 6 printheads and 6 stations - Maximum print area: 40 x 50 cm - Maximum outer screen frame size: 60 x 80 cm - Micro-registration with 3 knobs (X, Y and rotation) for accurate colour registration - Off-contact adjustment, screen/pallet parallelism and front/back pallet adjustment - Sliding pallets locked by ball plunger, rear screen clamping with anti-crush system - Pallet height: 86 cm, net weight: 200 kg - Fully manual, no electrical connection needed, dismantles for transport 2. 16 PALLETS INCLUDED (PLATENS) - 6 x men's XL pallets: 66 x 48 cm Fgjdpo Agvmmefx Am Eei - 6 x women's M pallets: 50 x 32 cm - 2 x children's S pallets: 40 x 22 cm - 1 x sleeve pallet: 60 x 15 cm - 1 x sleeve pallet: 40 x 15 cm A complete pallet set for adult, youth and sleeve printing, with enough pallets to run all 6 stations in men's or women's sizes. 3. TIFLEX 40 x 40 CM INFRARED FLASH CURE UNIT (2008, VERY GOOD CONDITION) - Flash dryer for screen printing, 6 short-wave infrared emitters, 12 kW - Drying area: 40 x 40 cm - Drying timer and air-jet cooling timer - Automatic cycle start by contact rod when the pallet is detected - Half-power setting for delicate mesh - Height-adjustable stand on wheels - Three-phase 400 V, 18 A - Ideal for flashing a white underbase on dark garments before printing bright colours 4. TIFLEX T-IR 80 INFRARED CONVEYOR DRYER (2008, GOOD CONDITION) - Infrared textile dryer / drying tunnel for curing plastisol inks - Useful belt width: 80 cm, length under heating element: 130 cm - Teflon glass conveyor belt resistant to 250 °C - Variable belt speed, temperature controller with digital display - Movable shutters for thick items up to 12 cm (caps) - Fume extraction outlet, diameter 125 mm - Power: 4.8 kW, three-phase 400 V, 7 A - Overall dimensions: 270 x 131 x 130 cm, net weight: 265 kg LOCATION AND SHIPPING Equipment located in Bègles (Bordeaux area), France. Shipping across Europe and worldwide available on quotation. Tiflex screen printing machine, manual screen printing press, screen printing carousel, 6 colour 6 station press, textile screen printing equipment, t-shirt printing machine, garment printing, flash dryer, flash cure unit, infrared conveyor dryer, plastisol curing, screen printing pallets, used screen printing equipment.

Condition: used, machine/vehicle number: 008794, Max width workable: 800 mm Max length workable: 2500 mm Fgodpfx Amj Aia Rqj Eoi Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, overall weight: 20,500 kg, number of blades: 50, control cabinet length: 3,000 mm, control cabinet height: 2,300 mm, power: 200 kW (271.92 HP), rotational speed (max.): 264 rpm, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets Fodpfx Amj Ahnqyo Esgi The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Fgjdpfeuanrwox Am Eji

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 4,020 mm, total width: 4,020 mm, Due to restructuring, we are selling a premium segment automatic screen printing press suitable for ambitious beginners and professionals, consisting of: TAS textile screen printing press, model 203 RA L (year 2001) incl. spare parts worth approx. €300 - Excellent condition / low usage - 10 pallets / 8 colors - Extra-large print area: max. 500 x 620 mm - Max. frame size: 660 x 930 mm - Incl. intermediate dryer 9.0 kW (variable application) - Drive type: pneumatic - Pneumatic screen clamping - Central lift-off device - High-quality components from renowned manufacturers used (e.g. FESTO, EBM Pabst, ...) - Two sets of pallets - Includes various print and flood squeegees Recently, a large proportion of hoses were replaced and a pneumatic cylinder was completely overhauled! Included spare parts: - 3x pneumatic cylinders for screen holders - 1x switch for screen clamping (Bosch) - 1x regulator for print and squeegee speed (Bosch) Fgsdpfsz En Inox Am Eei - 5x squeegee holders - 1x silencer (Riegler) - Pneumatic hose (Festo) - Various hose connectors (Festo, Riegler) - Various plugs Once correctly installed, the press delivers highly precise prints, runs smoothly, and is extremely durable by design. We are happy to answer any questions you may have! NOTE for German buyers: There is a German company specialized in servicing and supplying spare parts for these premium machines, ensuring professional maintenance and parts availability. The price is NET (excluding VAT)!

Condition: excellent (used), CATALOGUE NUMBER: 6875 TECHNICAL DATA - inlet width: 720mm - inlet height: 160mm - thickness of material to be shredded: 160mm - shaft width: 720mm - shaft diameter: 600mm - knife length: 80mm - number of knives: 4 × 12 pcs - screen dimensions: 25mm - feed roller with pressure on the inlet: 0.75kW Fedpfx Ao Agga Tjm Esgi - toothed feed roller at the bottom: 1.8kW - toothed feed roller at the top: 1.8kW - vibratory feeder length: 4470mm - vibratory feeder width: 710mm - vibratory feeder motor: 2.2kW - main motor: 55kW - auto-reverse - diameter of the suction nozzle: 260mm - vibratory feeder dimensions (L/W/H): 4470/950/930mm - machine dimensions (L/W/H): 3100/1500/1170mm - total weight: approximately 5500kg – German production – very low mileage – original documentation - auto-reverse (with adjustment option) – used shredder, very good / excellent condition Net price: 139900 PLN Net price: 32535 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Reversing clamp Fgsdpfxjin Ef Rj Am Eji Manufacturer: Rückle Type: PKTW 2 Dimension: 5 x 1 x 1,5 meter Forkardt power chuck type FNC 315-65 Bore 65 mm Outer diameter 315 mm Further: Profile rail guide RUE 45 4 centering and clamping units Integrated chip guide

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h Fgedpfxowhy T Ts Am Eei - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fjdpfx Ams Ait Nls Eegi FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 7,500 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1635 Type - Dewatering Screen - Capacity: 80-120 T/H - Size: 1650 x 3500mm - Screen Decks: 1 Deck 0.250 micron Polyurethane Screen - Screen Surface: 5.60 m2 - Screen Power/Spin: 2 x 7.5 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Weight: 7500 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Fgjdo Ahyi Ropfx Am Eji

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 13,000 kg, All of our products are made with care and covered for 1 year warranty! Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1640 Type - Dewatering Screen - Capacity: 150 T/H - Size: 1600 x 4000mm - Screen Decks: 1 Deck 0.250 / 0.500 micron Polyurethane Screen - Screen Surface: 6,4 m2 - Screen Power/Spin: 2 x 8.4 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm Fgedpfj Ahyimox Am Esi - Discharging pipe: 219 x 10 mm installation tube - Water Consumption: 300-450 m³/h - Weight: 13000 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), functionality: fully functional, “Hein Lehmann UK 1.2 – 3.0 ED” for Sale Manufacturer: Hein Lehmann Type: UK 1.2 – 3.0 ED Deck size: 1.200 x 3.000 mm. Fgsdpfju Tkrysx Am Eoi Included: – Electrical Motor – Cardan-shaft – Rubber Springs Vibrating screen can be sandblasted and painted.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: a Screen PT-R 4600S plate setter with a single-cassette feeder and plate stacker. The units have very low usage, having processed only 17,500 plates, and are in like-new condition. Fjdpez R T I Hjfx Am Ejgi

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ME 1650, total height: 4,500 mm, total width: 3,800 mm, total length: 10,800 mm, overall weight: 18,000 kg, input voltage: 380 V, power: 22 kW (29.91 HP), ME 1650 Mobile Screening Plant 130 / 250 Tons per hour capacity. Fgedpfowhpf Sex Am Esi The GNR ME1650 Mobile Screening Plant can be fed with loaders in sand or mines, or connected by a belt to another crushing screening plant in use. GNR ME1650, which can be operated with a generator or mains power, is capable of screening sand in all conditions. The most important advantages are low-cost transportation, easy installation in a short time, and wide usage area. FOR MORE INFORMATION, PLEASE CONTACT US!

Condition: good (used), functionality: fully functional, Year of construction: 1994, “Hein Lehmann Liwell LF 2,0 – 6,30 / 20 DD” for Sale Manufacturer: Hein Lehmann Liwell Type: LF 2,0 – 6,30 / 20 DD Mach.No.: 1489 Year of Manufacture: 1994 Deck size: 2.000 x 6.300 mm Number of decks: 2 Included: – Frame – Electrical motor with console – Cardan-shaft – Rubber springs Vibrating screen can be sandblasted and painted. Fgodpfx Ameu Tiwgs Eoi

Condition: new, Year of construction: 2026, operating hours: 3 h, functionality: fully functional, overall weight: 5,250 kg, rotor diameter: 320 mm, total length: 3,861 mm, total height: 2,229 mm, total width: 2,418 mm, rotor width: 1,262 mm, power: 55 kW (74.78 HP), rotational speed (max.): 90 rpm, warranty duration: 24 months, input voltage: 400 V, As the top model in the series, the Robust Reuser SD 1300 single-shaft universal shredder is designed for continuous heavy-duty operation. Equipped with a robust rotor (diameter 320 mm), up to 55 kW of power, and a 120 l hydraulic unit, it operates with maximum efficiency and sets new standards for capacity and durability. High-performance single-shaft system for maximum throughput Flexible feeding options: conveyor belt, excavator, forklift, or lifting arm Siemens® PLC with ReSmart™ control (optional remote access) ReBoost™ & ReMotion™ technologies for smooth and rapid operation without blockages Externally mounted rotor bearings for easy and quick maintenance Hardox® screen for absolutely homogeneous final granules Fgedpfe Adqdvox Am Eei

Condition: good (used), Year of construction: 2007, Screen PT-R16000II, year 2007 Manual plate loading Internal plate cutter Laser head with GLV technology Fgsdpfx Amozhm Are Esi Plate format: 1470 mm x 1165 mm Up to 16 plates/hour in full format 199,000 exposed plates Online L bridge to G & J Quartz III 125 plate developer AGFA ST 125 SX plate stacker Screen EP-B101 network interface Eqious RIP/Workflow All offers are valid subject to prior sale.

Condition: new, Year of construction: 2026, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand U1254024-01 Trailing Edge Clamp Unit, "new" (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P Fjdpfsb Uptcjx Am Esgi S100096323V02 orig. Tail Clamp 8RE Set, "new" (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF "refurbished" with orig. Screen parts All other diodes and clamp sets on request

Condition: good (used), Screw clamps with shaft, pipe clamps, pipe fastening Fgedjb A Sl Sepfx Am Esi -DN: 10/12 -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Screen PT-R4600 E/ Avalon N4-30 E S/N 462xxx, 16 Fiber coupled diodes, Plate count 10.792 Exposure time 1.045h AGFA Apogee Prepress RIP/Workflow All offers subject to prior sale Fgjdpfxjxlf Rvo Am Esi

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER Fsdpfx Asxwnw Asm Ejgi 4. 2 SET OF RACK DRYIERS ALL ARE NEW , OUT OF THEIR BOXES.

Condition: ready for operation (used), Year of construction: 2013, Machine in operation since: 2013 Reason for sale: Replacement as part of the standardization of the machine park Current operating speed: Stable production at 100 m/min Video reference: The machine is running at 100 m/min in the presented video The machine is sold together with integrated 6th generation Hunkeler unwinding and rewinding units. Year of production: 2013 Printing method: Piezo single-pass printing, four tones per drop RIP: EQUIOS Ink: Water-based pigment inks / water-based dye inks Resolution: Maximum 720 x 360 dpi Product configuration: Dual Engine Duplex Printing speed: Maximum 128 m/min (419.94 ft/min) Paper width: 165-520 mm (6.5"-20.47") Printing width: 150-506 mm (5.9"-19.92") Dimensions (W x D x H): 2,186 x 1,766 x 1,905 mm Width including operation panel: 2,028 mm Weight: 1,766 kg (3,894 lb) - Simplex Fgodpoz E Nz Aofx Am Esi POWER SUPPLY Printer: Three-phase 200-240 V, 25 A / 380-440 V, 15 A Single-phase: 200-240 V, 13 A Single-phase: 100-240 V, 2 A OPERATING ENVIRONMENT Temperature: 18-24°C Relative humidity: 40-60% No sudden temperature changes No condensation