Used Swing Clamp for sale (11,567)

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information Cedszii A Dopfx Aktori For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Equipped with an additional safety guard. Crsdpfsz S Uxhjx Aktoi

Condition: good (used), Italdibipack Swing 4255 Shrink wrapping machine The machine is in full working order, ready for production, and in very good condition. The photos show the actual product being sold. Made in Italy. Description: Cjdpfx Akjz S Ulhetjri The „Swing” series of L-sealer shrink wrapping machines is characterized by a compact design, allowing them to occupy less space than other similar systems available on the market. Technical specifications: Sealing bar dimensions: 420 × 550 mm Max. product height: 230 mm Power supply: 230V

Condition: good (used), Year of construction: 2015, Offer 26282 Clamping, alignment, and welding table with T-slots and cast iron rails Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm Csdpfx Aj Ah Rp Hsktori - Max. point load (with adjustable feet) 1500 kg - Grid engraving 100 x 100 mm - Distance between axes 100 mm - Weight approx. 600 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Codpfxj Ahm Sqj Aktjri Manufacturer: Siegmund Large format: 3000 x 1500 mm with clamping system and trolley

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Cedpfxsx A Hfve Aktjri Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: good (used), Year of construction: 2016, 1 used 4-station clamping tower Manufacturer: ALLMATIC Credpfx Ao Ah Dyrjktoi Number of clamping devices: 4 Clamping device: ALLMATIC NC machine vises Jaw width: 125 mm Clamping system: Mechanical NC clamping system Application: CNC milling machines and machining centers Suitable for multiple clamping and series production Special advantages Four-fold clamping for high productivity Optimal utilization of the machine work area Reduction of setup and downtime Robust and high-quality ALLMATIC design Ideal for single-part and series production Flexible workpiece clamping for various machining tasks Scope of delivery 1 × ALLMATIC 4-station clamping tower 4 × ALLMATIC NC vises, jaw width 125 mm

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200067, type of input current: three-phase, overall weight: 445 kg, input voltage: 380 V, input frequency: 50 Hz, power: 1.1 kW (1.50 HP), We offer this used Omec SBM1200 Manual hydraulic clamp, year of construction 2020. Cedps Afn Easfx Aktsri Construction year: 2020 Power: 1.1 kW Voltage: 380 V Frequency: 50 Hz Weight: 445 kg Phases: 3 phases If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2003, Equipment: documentation/manual, safety light barrier, Triag clamping cubes for 500x500 pallets Codoz A Ab Depfx Aktjri

Condition: like new (used), Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, Reishauer clamping device, base unit, basic chuck FK 38 suitable for Reishauer gear grinding machine, fits on the spindle for grinding machines RZ 150 / RZ160 / RZ 260 clamping diameter 38 mm for n max. = 3,000 rpm balanced with clamping stroke control / 3-point support control and media feed for additional functions: clamping / air system control / clamping stroke monitoring incl. assembly and operating instructions, as well as Reishauer wooden transport container as new – hardly used, from our stock 2 units available Price negotiable Our asking price is € 3,990.00 net ex works, plus packaging costs All technical specifications are subject to printing errors and changes. Cjdpfx Akswzkcxeteri We only sell to countries within the European Community.

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, We are selling a plate gripper that we only used once, but it did not meet our requirements. The device is in new condition. Crodpe Agu Swofx Aktji

Condition: excellent (used), Year of construction: 2010, 1. Clamping table, square design, manufactured by AMF, dimensions 600 x 1060 mm, year of manufacture 2010. Width 600 mm, height 1060 mm (4 sides). Base plate: 760 mm x 735 mm x 50 mm. Grid hole spacing: 50 mm x 50 mm, thread: M16. New price: €12,000. Codpfsz N S Egox Aktori In very good condition.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Crjdpfxoztzi Rs Aktji Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: used, functionality: fully functional, LENZKES Clamping System Package Upper components: Crodpfx Akezyk Sujtei 6 pieces, width = 60 mm, groove = 18 mm, length = 125 mm, height = 130 mm 6 pieces, width = 60 mm, groove = 18 mm, length = 125 mm, height = 70 mm 4 pieces, width = 90 mm, groove = 28 mm, length = 180 mm, height = 110 mm 4 pieces, width = 90 mm, groove = 28 mm, length = 180 mm, height = 200 mm Lower components: 3 pieces, width = 60 mm, length = 150 mm, height = 250 mm 3 pieces, width = 60 mm, length = 150 mm, height = 160 mm Adjustable force clamps: 5 pieces, width = 60 mm, length = 130 mm, height = 42 mm 3 pieces, width = 60 mm, length = 110 mm, height = 42 mm 12 pieces, width = 60 mm, length = 90 mm, height = 42 mm 6 pieces, width = 52 mm, length = 127 mm, height = 35 mm 3 pieces, width = 52 mm, length = 87 mm, height = 37 mm 14 pieces, width = 52 mm, length = 76 mm, height = 37 mm 2 pieces, width = 75 mm, length = 48 mm, height = 160 mm 4 pieces, width = 75 mm, length = 48 mm, height = 110 mm Free addition: Various clamping jaws (7 pieces complete + 5 pieces accessories) AMF clamping jaws (comparable with Lenzkes) AMF No. 6321/17 4 pieces, width = 50 mm, length = 140 mm, height = 50 mm incl. clamping screws M12

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return. Crjdpfx Akez It Ewotei

Condition: like new (used), Year of construction: 2005, functionality: fully functional, Müller Martini Corona, (~2005), complete clamping unit, for a machine with a maximum speed of 18,000 units/hour. Codjz Au I Eopfx Akteri - Part numbers: 3010 1011 9 and 3010 1013.9 The entire clamping unit is available for sale as a spare part.

Condition: like new (used), functionality: fully functional, Clamping elements Dimensions, W x D approx. 100 x 150 mm Overall height 91.5 mm Jaw width 30 mm Lowest support height on jaws 68.5 mm Middle support height 80 mm Codpfx Akez Td A Eotjri Clamping height per jaw approx. 11.5 mm Jaw clamping travel approx. 25 mm

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Credpfozx D A Dex Aktsi Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: used, Gamal Door Clamp with Loading Treppel Credps Ahgnasfx Aktoi

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Bystronic Swivel Crane - Model: SSK2 - Year: 2015 - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Bystronic Suction Device - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Disassembly and installation can be performed by our service team upon request. Immediately available. Codpfsz Dphgjx Aktjri

Condition: excellent (used), The following HWR components are for sale, among others: Chuck jaws and centering devices • 1 INOFlex VL120, 4-jaw manual chuck, Ø 1,150 mm, Art.-No. 846120 • 1 INOFlex VL060, 4-jaw manual chuck, Ø 600 mm, Art.-No. 846060 • 1 INOFlex VF026, self-centering 4-jaw centering device, Ø 260 mm, Art.-No. 842026 INOZet pivoting bridges • 1 set WT063-4-WV25, clamping range Ø 270–630 mm, Art.-No. 750180 • 1 set WT120-4-WV83, clamping range Ø 600–1,200 mm, Art.-No. 750181 • 1 set WT063-4-WV24, clamping range Ø 182–630 mm, Art.-No. 750179 Gripper jaws and adapter jaws • VR16, reversible gripper jaws for VL060/VL070/VL080, Art.-No. 850016 • VP17, soft adapter jaws, Art.-No. 851017 • WR16-8, reversible gripper jaws for INOZet pivoting bridges, Art.-No. 760162 • WP16-8, soft adapter jaws, Art.-No. 770117 • WP25-8, soft adapter jaws, Art.-No. 770126 • VR12, reversible gripper jaws for VF026, Art.-No. 850012 Movable jaws and fixed stops • VCF120, fixed stops, Art.-No. 854016 • VCB120, movable jaws, Art.-No. 854018 • VCF070, fixed stops, Art.-No. 854006 • VCB070, movable jaws, Art.-No. 854007 • VCB026, movable jaws, Art.-No. 854019 • VCF026, fixed stop jaws, Art.-No. 854020 • VCB028, movable jaws, Art.-No. 854029 • VCG026, movable, reversible jaws with gearing, Art.-No. 854033 Crodpjz Ira Tefx Aktsi In addition, various related T- and double T-slot nuts, fastening screws, and other accessories are available. Total net new price: 117,000 EUR Purchases were made in 2021 and 2023. The attached images provide an initial overview of the available components.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Shipping and inspection are possible! Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Identification & Classification Article number: 360040 10012 Codpfx Aez E Rdfjkteri EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Application: For individual installation in clamping fixtures.

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM - DECKEL, type RB 160 Hydraulic vise, clamping device Jaw width: 160 mm Jaw height: 49 mm Clamping force: 5 tons Cjdpfx Ako Agw D Uotori Clamping range: 0 to 300 mm Opening width: max. 308 mm Clamping range: approx. 100 mm (per step) Guide rail height: 118 mm - Clamping force adjustable in 4 steps - 3 clamping ranges adjustable via locking pins - Rotating plate with degree scale Dimensions L x W x H: 570 x 350 x 167 mm Weight: 76 kg Very good condition

Condition: used, Hydromechanical, NC machine vice, VIS - HYDRAULIQUE Precision machine vice, spanner Type 20700 Year of manufacture: approx. 2000 Jaw width: 150 mm Jaw height: 42 mm Clamping range: 0 to 250 mm Opening width: max. 253 mm Clamping force: 6 tons Guide rail height: 51 mm Guide rail length: 450 mm - Hydromechanical machine vice - Quick adjustment with clamping ball locking in a hole grid, 8-fold Cjdpfx Ake Agw Dxeteri - Sturdy base body, ground on all sides - Can be mounted horizontally, vertically or laterally - Guide rail with 15 mm and 19 mm guide groove Dimensions L x W x H: 480 x 150 x 107 mm Weight: 31.5 kg Good condition

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00 Crodpfjzfimusx Aktsi