Used Medical Clamps for sale (10,202)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! Knedpfx Akjz Aplxjxob TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Knedpfx Ajzzkwgekxsb Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Kedpfx Akjzzbb Nsxjnb Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 8 pcs. Kjdpfxjzzbdwe Akxsnb Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Power: 7.5 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Kedpfozzlc Rsx Akxsnb Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm 1x Protractor 2x Prism 1x Eccentric 1x Flat angle Kedpozxcmhofx Akxonb 12x Clamping/tensioning screw 12x Clamp

Condition: used, Professional BK Medical BK Ultrasound bk5000 ultrasound machine, designed for diagnostic imaging. The device powers on correctly – the screen and control panel are functional. The machine is mounted on a mobile stand equipped with wheels, probe holders, and an adjustable monitor. Device specifications: Manufacturer: BK Medical / BK Ultrasound Model: bk5000 Type / REF: 2300 Version: BK5000-11 Serial number: 5008020 Year of manufacture: 2016 Country of manufacture: Denmark CE marking: 0543 Color monitor Full keyboard and control panel Mobile design on wheels Included: BK Medical bk5000 ultrasound machine, Mobile stand, Monitor, Control panel, Knodezyy Ryopfx Akxob 2 ultrasound probes as shown in the pictures, Cables, Documentation and operating instructions. The device is used, functional, and shows normal signs of use, with some dirt and minor scratches. There are localized marks from a marker on the housing. The exact visual condition and included accessories are shown in the pictures. The screen displays the message “Factory Mode Active / Not for Diagnostic Use” – the device is currently operating in factory mode and may require appropriate configuration or activation by an authorized service center before medical use. The sale includes only the items shown in the pictures.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: STERIVAP 6612, For sale is a BMT STERIVAP 6612 steam sterilizer from an active food production facility. The autoclave was originally designed for medical applications and is currently used successfully for sterilizing beverage bottles. Up to 350 bottles are processed per sterilization cycle on specially adapted transport trolleys. The unit features integrated steam generation, a modern Siemens control system with a touchscreen, and programmable sterilization cycles with stored programs for temperatures above 121 °C. The system is in very good technical condition. The heating elements have been replaced, wear parts have been regularly exchanged, and all maintenance has been performed on an ongoing basis. The autoclave is currently in daily operation and can be inspected under production conditions until August 2026. Further details: Kjdezccunjpfx Akxenb Usable volume: 610 liters Pass-through design Integrated steam generation Siemens control system with color touchscreen Display currently set to Polish, other languages possible Programmable sterilization cycles Stored programs > 121 °C Heating elements replaced Regular maintenance Wear parts regularly replaced 1 transport trolley included Additional transport trolleys available Currently used in a food processing facility Inspection possible during operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €20,900 (negotiable).

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Kodpfxox A Hfvs Akxonb Max feed speed: 40 m/min

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h Kedpfx Aszzkvcjkxsnb EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, REISHAUER US is a Thread grinding machine of high precision, engineered for superior accuracy and reliability. Capacities: grinding length 450 mm; clamping 1055 mm; max Ø 250 mm; thread Ø 2–250 mm; spindle bore 45 mm; weight on centres 200 kg; pitch ≤100 mm; angles ±40°; module ≤10; wheels Ø280–350 mm, width 4–40 mm. Specs: wheel speeds 6 steps 1700–2540 rpm; work spindle 27 steps up to 160 rpm; 3×380 V 50 Hz; grinding spindle 4 kW; total 15 kVA; machine ≈4700 kg; footprint 3300×1930×1800 mm. Accessories: coolant, wheel set, flanges, gear set, centers, oil-mist extractor. Achieves tight tolerances; suitable for automotive, aerospace, watchmaking, machine tools, medical. Kjdpfoz Dbh Ejx Akxenb

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Knjdpfoxf T I Njx Akxjb Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit Knodpsuggb Dofx Akxob The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT Ksdpfxoud H Dmo Akxjnb  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Kjdezy If Espfx Akxenb Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 Ksdezyay Ispfx Akxenb MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh Knodpfx Akozwgxrjxob

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Knsdpezy Ihyefx Akxob Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Knedpfx Aozabnzokxsb Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality Knodpsyzz Irofx Akxjb CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: good (used), Year of construction: 2007, operating hours: 63,868 h, functionality: fully functional, machine/vehicle number: 413089, clamping force: 500 kN, screw diameter: 30 mm, overall weight: 3,400 kg, We are selling a fully functional EE50. It is connected to the power grid and can be inspected at any time. Accessories: Handling interface EM67. Knedjz Dq N Sjpfx Akxeb

Condition: used, Year of construction: 2017, For Sale: Negri Bossi M70-V90 Injection Moulding Machine Manufacturer: Negri Bossi Model: M70-V90 EUROMAP Class: 900 H - 210 Year of Manufacture: 2017 Operating Hours: 10,792 hours Condition: Good working condition, available for inspection Machine Highlights - Reliable and energy-efficient injection moulding machine - Well maintained and ready for immediate operation - Suitable for a wide range of plastic injection moulding applications - Low operating hours for its age - Equipped according to EUROMAP Class 900 H - 210 specifications Kjdpfxsz Dwn Is Akxonb Technical Specifications - Manufacturer: Negri Bossi - Model: M70-V90 - Year: 2017 - Operating Hours: 10,792 - EUROMAP Class: 900 H - 210 Additional Information The machine can be inspected under power by appointment. Maintenance records and further technical details can be provided upon request. Available for immediate sale. For pricing, additional specifications, photos, or a video demonstration, please contact us. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Negri Bossi Model: M70-V90 EUROMAP Class: 900 H - 210 Year of Manufacture: 2017 Operating Hours: 10,792 hours

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation Ksdez D H D Eepfx Akxjnb compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2009, condition: ready for operation (used), A Primacon CNC high-precision vertical machining center for machining small workpieces in the medical sector is available. Axis travels X/Y/Z: 240mm/240mm/240mm, table dimensions X/Y: 350mm/300mm, max. table load: 60kg, spindle speed: 40000rpm, tool holder: HSK-25, feed rate: 12m/min, rapid traverse: 12m/min, positioning accuracy: +/-0.001mm, repeatability: +/-0.0005mm. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/2200mm, weight: approx. 1000kg, control: Heidenhain. The spindle is occasionally not clamped correctly during the tool change process. The ventilation hose of the Z-axis rubs against the A-axis block. Documentation available. An on-site inspection is possible. Ksdpfx Akozq Eb Sjxjnb

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and customized engravings. Machine data: Knjdpoz D Htgefx Akxsb Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Stable machine table with T-slots for workpiece clamping Matching base frame Wired handheld control unit Extraction device on the machining head Spray device 750-W HF spindle kit for the IQ series, according to the order confirmation from November 2017 The machine was purchased in December 2016. It is worth noting the excellent condition and the low usage with only approx. 500 operating hours. Price: net 14,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.