Used Carrying Crates for sale (3,399)

Condition: good (used), axle configuration: 3 axles, first registration: 10/1986, loading space volume: 30 m³, suspension: air, color: silver, Year of construction: 1986, Equipment: ABS, Axle configuration Make axles: SAF Brakes: drum brakes Suspension: air suspension Weights Empty weight: 8.520 kg Carrying capacity: 29.480 kg GVW: 38.000 kg Functional Number of compartments: 3 Condition Technical condition: good Rjdpfjx H S Hcsx Agzsck Visual appearance: good Additional information Please contact Arie or Pedro for more information 3x compartiment: 2x 12.000 liter 1x 6.000 liter Total: 30.000 liter

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . Rcjdpfed E R D Ssx Agzsk The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), Year of construction: 2026, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture: 2016 Technical specifications: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2016 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspections, including under power, are possible by appointment at any time. Upon request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: Rsdpfx Agjx Irxhezock All technical information is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. The offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: used, mileage: 585,000 km, Year of construction: 2007, Serial number: XLEP6X2000517xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21242 Specifications: Km: 585,000 Transmission: Automatic with clutch 6x2 Full air suspension Engine brake Euro 5, 420 hp Good tires Zepro lift, 2000 kg Remote control Rcodpfxsw Ucldj Agzsk SKAB body 21-pallet box, inside hight is 260 Cooling/freezing unit (not working) Bunk Radio/CD Climate control/AC Servicing done at local workshop Video attached Ready for delivery Description:Scania P240 box truck from 2007.The truck has a 21-pallet box and is approved until 2026.Cooling/freezing unit is not working.Service and maintenance carried out at local workshops.Ready for delivery. Km: 585000 HK: 420 Technical approved: Yes EU-approved until: 10.04.2026 Own weight: 15500 Payload: 11425 Model: P420

Condition: good (used), mileage: 363,076 km, power: 118 kW (160.44 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Steering wheel placement: Left Front axle: Suspension: parabolic suspension Rear axle: Suspension: air suspension Empty weight: 4.803 kg Carrying capacity: 2.687 kg GVW: 7.490 kg Technical condition: good Visual appearance: good Please contact Vink Machinery for more information Mercedes Atego 816 * Top condition! * Extra set of ramps for low vehicles * Recently inspected and aligned by the dealer Rcsdpfox H Slrsx Agzjk * Winch * Euro 6

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual Rcsdpfxjvq Sd Rj Agzsk knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), mileage: 398,148 km, power: 280 kW (380.69 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,550 mm, loading space length: 7,210 mm, loading space width: 2,500 mm, loading space height: 2,430 mm, Year of construction: 2017, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, spoiler, tail-lift, Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Rodpfx Agox H S Duezock Axle configuration Brakes: disc brakes Front axle: Max. axle load: 5800 kg; Steering; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 10900 kg; Suspension: air suspension Weights Empty weight: 7.370 kg Carrying capacity: 8.930 kg GVW: 16.300 kg Functional Tail lift: PALFINGER, tail lift, 1500 kg Condition Technical condition: good Visual appearance: good Identification Registration number: BB-658-V Additional information Please contact Arie or Pedro for more information

Condition: new, axle configuration: 2 axles, loading space length: 4,250 mm, loading space width: 2,150 mm, loading space height: 600 mm, loading space volume: 5 m³, color: red, Carrying capacity: 12.000 kg Rcjdpfexmu Nwjx Agzek

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. Rcjdpfx Ajx Irw Rsgzsk We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Redpfx Agou R Szaezjck Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Rsdpfx Agovvi I Rezjck

Condition: good (used), axle configuration: 3 axles, first registration: 11/1989, loading space volume: 32 m³, suspension: air, color: beige, Year of construction: 1989, Equipment: ABS, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Weights Empty weight: 8.050 kg Carrying capacity: 39.950 kg GVW: 38.000 kg Maintenance, history and condition APK (MOT): tested until 03/2026 Technical condition: good Visual appearance: good Additional information Rodpfx Aex H R Sqjgzeck Please contact Arie or Pedro for more information ADR : FL- AT

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Baler Austropressen AP 25, semi-automatic, with lifting-tipping device for wheelie bins (MGB) Technical Specifications: Manufacturer: Austropresse Model: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Feed opening: 1500 x 940 mm Binding: 3-fold, manual Rcodpfx Aex Irvysgzek Bale size: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: paper, cardboard, film, metals, foams, etc. Note: The baler is in very good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Complete documentation is included. Inspection, including live demonstration, is possible at any time by prior arrangement. On request, we can also carry out tests with your material for a nominal charge. If you have any questions about the machine, we are happy to advise you by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the specifications or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Rcsdpfx Ajvwbp Aegzsk

Condition: good (used), axle configuration: 3 axles, first registration: 05/1986, loading space volume: 30 m³, suspension: air, color: silver, Year of construction: 1986, Equipment: ABS, Axle configuration Make axles: SAF Brakes: drum brakes Suspension: air suspension Weights Redpjx H R Sdsfx Agzeck Empty weight: 7.920 kg Carrying capacity: 28.080 kg GVW: 36.000 kg Functional Number of compartments: 3 Maintenance, history and condition APK (MOT): tested until 04/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information ADR : FL - AT

Condition: used, Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II with hopper, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Feed opening: 1000 x 650 mm Rcedpfsx Irvaox Agzsk Throughput: approx. 60/115 m³/h Bale dimensions: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials processed: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It was inspected and tested at our site in 28816 Stuhr. Video footage is available on our website or YouTube channel. Inspection, including powered operation, is possible at any time by appointment. Upon request, we can also carry out tests using your material for a handling fee. If you have questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the information provided or for possible errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Rcjdpfsvvi N Isx Agzsk

Condition: good (used), axle configuration: 3 axles, first registration: 04/2016, total length: 13,860 mm, total width: 2,550 mm, total height: 3,960 mm, suspension: air, wheelbase: 8,960 mm, color: silver, Year of construction: 2016, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rcjdpfx Agsx H R Avszsk Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.200 kg Carrying capacity: 33.800 kg GVW: 41.000 kg Maintenance, history and condition APK (MOT): tested until 05/2026 Technical condition: good Visual appearance: good Identification Registration number: OP-35-FX Additional information Please contact Arie or Pedro for more information

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Rsdex Iri Hspfx Agzjck Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Rsdpfx Agsvvi Scszsck

Condition: good (used), mileage: 606,415 km, power: 309 kW (420.12 HP), first registration: 09/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, fridge, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.714 kg Carrying capacity: 11.260 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Rjdox Hx Rujpfx Agzjck Additional information Please contact Arie or Pedro for more information

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical Baler Dixi 50 S, Year of Manufacture 2019 Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Time: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Bale Weight: 300–350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Rodjx Irimopfx Agzsck Remarks: The machine is in very good condition. It has been inspected and tested at our Stuhr location (postal code 28816). You can find a video of the machine on our website or on our YouTube channel. Viewings, including under power, are possible at any time by prior arrangement. On request, we can also carry out test runs with your material for a handling fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00. Please note: All technical details are based on manufacturer information. We accept no liability for the accuracy of the provided data or for any errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,350 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year of Manufacture 2009 Technical Specifications: Manufacturer: Europress Model: 6500 V5 H4 Year of Manufacture: 2009 Operating Hours: approx. 15,334 hours Number of Bales: 138,097 bales Main Press Force: 120 t Specific Press Force: 142 kg/cm² Feed Hopper Dimensions: 1,650 x 1,100 mm Filling Volume: 3 m³ Filling Volume per Press Cycle: 1.58 m³ Bale Dimensions: 730 x 1,100 mm Drive Power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total Connected Load: 83 kW Current Consumption: 150 A Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale Weight: 450–900 kg Hydraulic Tank Capacity: 1,200 L PLC Control: Siemens S7-200 Control Panel: Siemens Touchscreen Press Dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport Dimensions Press: 9,965 x 2,500 x 2,900 mm (L x W x H) Press Weight: approx. 28 t Work Carried Out on the EP 6500 V5: - Completely derusted and repainted - Inner steel floor of the press completely renewed - Ram (steel structure) overhauled - Complete overhaul of the horizontal and vertical lance boxes - Complete renewal of internal Hardox wear plating - All hydraulic hoses new - Both hydraulic cylinder lifters renewed - Knives and counter knives replaced - All hydraulic cylinders resealed and tested - All slide and guide plastics replaced - Wire deflection pulleys renewed - Replacement of various cables and sensors - Replacement of various electrical components (control cabinet) - Complete inspection of electrics/control system - Complete hydraulic pressure inspection Remarks: The machine has been overhauled, inspected, and tested by us. You can find the video on our website or YouTube channel. Rsdpfxex Irh No Agzeck Inspections, including powered tests, are possible at any time by prior arrangement. If you have any questions regarding the machine, we are happy to assist you by phone Monday to Thursday from 08:00 to 14:00, and Friday from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for possible errors. Offers are subject to change, prior sale, and withdrawal at any time. Inspections are possible by prior arrangement. The sale is ex location, without any warranty or guarantee.

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Model: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: High-speed shredder shaft with counter comb Rjdpfxex Iqvxs Agzsck Remarks: The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or YouTube channel. Viewings can be arranged at any time by appointment. Upon request, we are also happy to carry out test runs with your own material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for the accuracy of this information or for any possible errors. Offers are subject to change, prior sale, and revocation at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Vecoplan Shredder, Type VAZ 110, year of manufacture 2017, with hopper and extraction port. Manufacturer: Vecoplan Type: VAZ 110 Year of manufacture: 2017 Motor rated power: 18.5 kW Frequency inverter rated power: 22 kW Feed opening: 1200 x 1075 mm Rotor diameter: 250 mm Redsx Iqryspfx Agzsck Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Screen hole size: 20 mm Extraction port diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package with 20 mm screen, 1 set of tools, cutters and counter cutters, motor, plastics, springs, etc. Materials: Wood waste, films, packaging material, chipboard, paper, textiles Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Complete documentation including CE declaration is available. Inspections can be arranged at any time by appointment. On request, we are also happy to carry out test runs with your material for a handling fee. If you have any questions about the machine, we are available by phone Monday to Thursday from 08:00 to 14:00 h and Friday from 08:00 to 13:00 h. Please note: All technical data is based on manufacturer information. We do not accept liability for the information provided or any possible errors. All offers are subject to change, prior sale, and revocation at any time. Inspections can be arranged upon request. Sale is ex location, without warranty or guarantee.