Used Central Heating Boilers for sale (19,488)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ogs30-GA-130-40-MZ, this is a 30m³ storage tank, it is pre-owned but overhauled and can be used to store diesel, it has also a diesel pump which is new Kjdpfx Ajcybvzogzsnf

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high tested maximum temperature: 1000°C electrical connection: 400 V, 13 kW space requirement: 550 x 1600 x 1830 mm Kedpfxjbn I Tzo Agzjnf Weight: 492 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Knsdpfxst Ngfie Agzof

Condition: used, Year of construction: 1994, Wood chip boiler Polytechnik PR 800 HVR, output 800 kW, year of manufacture 1994, moving grate firing system, including feed screw with backfire protection, including fuel transport auger, including walking floor, 4 push rods with cylinders and hydraulic unit (walking floor together with Kohlbach system), including control unit, including return flow elevation (boiler pump with mixing valve), system fully functional, on the Polytechnik system 2 heat exchanger tubes at the front and rear have been welded shut. Dismantling must be carried out by the buyer! Knsdovgcwmspfx Agzef Wood chip boiler Kohlbach SU 800, output 800 kW, year of manufacture 1996, moving grate firing system, including hydraulic feed with hydraulic unit, including fuel transport auger, including walking floor, 4 push rods with cylinders and hydraulic unit (walking floor together with Polytechnik system), including control unit, including return flow elevation (boiler pump with mixing valve), system fully functional, dismantling must be carried out by the buyer!

Condition: good (used), Year of construction: 2018, functionality: fully functional, heating capacity: 600 kW (815.77 HP), Heating System Manufacturer: Nolting Automatic moving grate firing system, nominal output 600 kW Emission warranty in accordance with 1st BImSchV / 44th BImSchV High efficiency: over 90% Very maintenance-friendly due to large inspection openings Convenient operation through automatic de-ashing Equipped with flue gas dedusting Fine dust filter unit: Glosfume NGFL3350 Year of manufacture: 2018 Max. gas flow: 3,350 AM Max. inlet temperature: 250°C Dry cleaning Ceramic filter elements Fuels: Planer shavings Chipper shavings Forest wood chips Pellets Briquetted shavings Knjdpfoxmd Ipsx Agzsf Material with high slag formation Boiler dimensions: Length: 2,570 mm Width: 1,510 mm Height: 2,930 mm Weight: 7,130 kg

Condition: good (used), Memmert B60 Incubator For sale is a used B60 incubator from Memmert. Technical details: Knodoxlq Nkspfx Agzof Manufacturer: Memmert Model: B60 Design: Incubator / Heating Cabinet Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Areas of application: Laboratory, research, industry, medicine Condition: Used, functional Buy Memmert B60 incubators and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: excellent (used), mileage: 1,113,605 km, power: 360 kW (489.46 HP), first registration: 09/2015, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 8,320 mm, loading space width: 2,510 mm, loading space height: 2,740 mm, Year of construction: 2015, YS2R6X20005390609 = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Drivetrain AdBlue system: Yes Axle configuration Maximum front axle load: 8,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Dimensions Dimensions (L x W): 80 x 260 cm Weights Unladen weight: 14,240 kg Payload: 12,760 kg gross vehicle weight (GVW): 27,000 kg Kodpfew Nqg Sjx Agzenf Condition Technical condition: very good Optical condition: very good Identification Registration number: 13-BGH-7 Further Information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are exclusive of VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch – English – German – French – Spanish – Italian (Available on WhatsApp and Viber.) MOB: Dutch only (Available on WhatsApp and Viber.) When paying by bank transfer, please transfer the amount to our bank account below. Always verify the payment details as listed on our website. If you receive different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 10,000 mm, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 HOT WATER WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 155/98 Connection power [kW]: 6.4 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW HEATING COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to use servicing The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. Knjdpexp D Emjfx Agzof

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Ksdpfjw I T Ivex Agzjnf Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: good (used), Kemper Welding Fume Extraction System Type 80050 – Central Extraction for 5 Workstations For sale is a central welding fume extraction system by Kemper, type 80050, year of manufacture 2000. The system comes from the first owner, a reputable metal fabrication company, has been serviced regularly by customer service, and is in excellent technical condition. It is ready for immediate use. — Technical details • Machine number: 111284 • Year of manufacture: 2000 • Airflow rate: 5,000 m³/h • Max. static pressure: 2,500 Pa • Voltage / Current / Power: 400 V / 11.6 A / 5.5 kW • Application: Extraction for up to 5 welding stations • Features: Includes hose system and swiveling wall mount — The machine is immediately available. • Inspection possible at any time • Loading and transport can be arranged without difficulty — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus VAT. Subject to prior sale and errors. Knedpfx Aoxk T A Rjgzjf

Condition: new, Year of construction: 2022, functionality: fully functional, power: 121 kW (164.51 HP), volume flow: 7,350 m³/h, nominal heat output: 110 kW (149.56 HP), tank capacity: 1,000 l, fuel: diesel, 17 units of mobile heaters, as new, unused, in original packaging, year of manufacture 2022. REMKO CLK 120 with oil burner and oil tank. Each includes a damp-room thermostat type RT-5. Air distributor head with 2 outlets of Ø 400 mm. 2 hot air hoses per unit, each 7.6 m long, including retaining strap, Ø 405 mm. Single-line extraction kit for 1000-litre oil tank, including quick couplings and appliance connection hose. Oil tank, diesel tank, heating oil tank, storage tank. Double-walled PE combination tank VET, capacity 1000 litres. Knedpfx Agexgn Dzjzof

Condition: used, Year of construction: 2005, Mawera FU 350 RIA underfeed stoker wood chip boiler, output 350 kW, year of construction 2005. Includes feeder screw with backfire safety, dust separator with exhaust fan, and control unit. Bunker discharge system, fire protection flap, and 1m long fuel auger are not included. Dismantling must be carried out by the buyer. The system can be rolled outside in one piece; threshold must be removed for this. Knodpfx Agsvgf Ibozef

Condition: good (used), 2 kW high-frequency inverter for soldering or joining Knjdpfxev N Nygj Agzsf

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Kjdoxfa Tlspfx Agzenf

Condition: used, functionality: limited functionality, tank capacity: 2,500 l, total length: 2,170 mm, total width: 750 mm, total height: 1,860 mm, overall weight: 100 kg, Equipment: mobile diesel tank, This is a used and dismantled 2500-liter heating oil tank with approximately 100 liters of residual heating oil sludge. Pickup only – delivery not possible. Knodpfoxfv Hhjx Agzof

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Kedpfx Asicic Hjgzenf Weight approx. 2000 kg Very good condition

Condition: like new (used), Year of construction: 2023, operating hours: 600 h, functionality: fully functional, One as new 120kw wood chip boiler and complete fuel feed system. Has only run for short period of time and in excellent condition. Comes complete with ultra-modern control system. Kjdpfxjwhc R Us Agzenf

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Kjdpsxgnx Sjfx Agzsnf

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Kedjwcmikjpfx Agzenf Text display OP 17 electric power : 26 kW 400V

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Knjdetwn Ipopfx Agzef Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: Vogel, OIL central lubrication pump oil inlet pump -Type: MFE 5/BW 7 Knsdpowykh Sofx Agzef -Container capacity: 6 l -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 9.5 kg

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Knodpfomquwqox Agzsf Weight approx. 550 kg Good condition

Condition: excellent (used), Distance between points 1000mm Machinable Diameter on Baseplate 575 mm Diameter Machinable on Trolley 300 mm Longitudinal Bed Width 410 mm Machine Speed Range 20- 1600 rpm No. of speeds 16 speeds Head Pitch Ø 52 mm Tailstock shank Ø 70 mm Tailstock Stroke 220 mm Main engine power 12 H.P. Machine weight 2200kg Machine dimensions 3300 x 1300 x 1500 mm Machine rebuilt and painted in RAL 7031 color. Main motor winding 380-660V Second hand 315mm chuck Suitable to R.D. 1215/97 with national safety protections of tempered glass. Equipment certified by OCA Authorized Control Body. Kodpfxsvi Rvij Agzenf Instruction book

Condition: used, Universal Temperature Control Unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Ksdpfx Ageg Rhx Uezsnf Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water supply + return: G 3/8" Cooling water supply + return: G 3/8" Total power consumption: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Tempering medium: water - Temperature control with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg In good condition

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet Kjdpfx Agsdz Spwozsnf - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.