Chocolate molding machine buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
screw size 15 mm injection shot weight in Polysterol 25 g/PS closing pressure 250 kN opening stroke 275 mm mould space 200 mm daylight opening 475 mm surface area 346x346 mm 3qqvz9bjh capacity of ejector 17 KN draw back pressure 10 KN ejector path 100 mm injection pressure 2450 bar control Arburg type Multitronica total power requirement 12 kW weight of the machine ca. 1,62 t dimensions of the machine ca. 3,3x1,7 m more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force Kunststoffspritzgiesspresse-320 to-screw diameter 65 mm control Unilog 400 Distance between tie bars 645x645 mm core pull data acquisition terminal handling system Fabr Battenfeld -2 Tempering Fabr Tool-Temp Qkwlgucek more
3
We offer here: Injection molding machine -Type Klöckner Ferromatik Desma FX75 / 2F 2-component injection molding machine -5422 operating hours (pilot plant) -Year 1993 -2 x 1730 bar injection pressure -Clamping force 75 tons -Power 30Kw - 380V -Weight approx. 4000 kg Nayot Further information on request more
5
clamping force:150 t clamping force:1500 kN injection pressure:2022 bar robot interface:ja total connection power:35,0 kW max. swept volumne:377 cm³ microprocessor control:MC3-F opening stroke:620 mm screw size:50 mm injection shot weight in Polysterol:339 g CONTROL:MC 3 mould hight min.:450 mm total weight:9000 kg dimension L x W x H:6,2 x 2,1 x 2,1 m Cjhxjbpy more
5
Manufacturer: Bürkle, Type: WGM 600, Year: 1986, Work piece width min-max mm: 600, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 80, Working widht max mm: 710, Operating side: rechts, Working height: ca.900, UV-laquer roller: yes, Widht of roller coater: 600, Widht of metering roller: 600, Attachment bracket roller: yes, rbakel: 1, Feeding speed min/max: 8-25, Type of transportation: band, Pump system: yes, Year :1986 Vqnsce more
5
screw size: mm Fhhdvsbd injection shot weight in Polysterol: g/PS closing pressure:2000 kN daylight:570 x 570 mm opening stroke:650 mm mould height - Max./min.:500 mm mm control:Selogica daylight between platens - max.:1150 mm total power requirement:57,6 kW weight of the machine ca.:8,0 t dimensions of the machine ca.: m The machine is equipped with horizontal injection unit and with a second injection unit in angular position - LCD colour monitor, colour type - Selogica control unit - 1... more
6
Clamping force: 50 t Min mould installation height: 225 mm Opening stroke: max. 325 mm Maximum distance from the clamping plates: 500 mm distance between lights: 270 x 270 mm Clamping plates: 400 x 400 mm Screw diameter: 35 mm maximum dispensing volume: 90 cc Shot weight PS: 80 g Locking force: 31 kN Connection: 19 kW Accessories: extraction unit TORO system AS Condition: good Bbitvgafed Weight: 1,8 t Dimensions: 3.700 x 1.700 x 1,800 mm more
5
screw size:115 mm injection shot weight in Polysterol:5858 g clamping force:20000 kN : INJECTION UNIT: screw size:115 mm max. swept volumne:6.232 cm³ injection shot weight in Polysterol:5.858 g/PS injection pressure:2.205 bar CLAMPING UNIT: closing pressure:2.000 t tie bar distance:1.900 x 1.500 mm mould hight - min.:1.000 mm 2sv223o7n mould hight - max.:1.700 mm opening stroke:2.600 mm CONTROL: microprocessor control:Polaris screen text:deutsch / german Manual:deutsch / german EQUIPMEN... more
6
We offer: Injection moulding machine ARBURG ALLROUNDER 320-750-210 right/robot GeKu 250s The molding is sold due to a Geschaefsumstelllung and new acquisition for our clients. The injection moulding machine has worked up to the production setting. Technical data Manufacturer: Arburg machine factory Hehl & sons Lossburg Type: Allrounder 320-750-210 Serial No.: 148837 Year of construction: 1990 Hours of operation: 70825 Clamping unit Clamping force: 75 t = 750 kN Opening stroke:... more
6
Injection machine used in very good condition Manufacturer: Arburg Type: 270 S 250-150 Controller: Selogica Year: 1999 working hours: approx. 51.100 h Extras: -HHG Handling Interface -pressure controller -colouring interface -Technology step 2 -high wear resistant screw cylinder -blow out unit -tool heating 6 channels 400 V -Orig. Selecta Unit -advanced monitoring -production control -extended movement (peripherie units dont belong to the offered machine) I3d7o7b clamping unit: clampi... more


chocolate ...
every day

New machines via email!

Be informed!
5
Manufacturer: Venyeskob, Type: Coolac, Year: 2006, Work piece width min-max mm: ca 300, Working width mm: ca 300, Conveyour system: Rolle, Year :2006 93u0wbr9s more
1
screw size:20 mm injection shot weight in Polysterol:29 g/PS closing pressure:500 kN daylight:270 x 270 mm opening stroke:350 mm mould height - Max./min.:200 mm control:Selogica daylight between platens - max.:550 mm Fx8grdfe0 total power requirement:23,9 kW weight of the machine ca.:2,3 t dimensions of the machine ca.: m CS version II - highly wear resistant plastification unit - with Selogica control - technology stage 2 - servo-regulated hydraulic plant with 2 regulating pumps - connectio... more
5
Clamping force: 35 tons Min mould installation height: 200 mm Opening stroke: 275 mm Maximum distance from the clamping plates: 475 mm distance between lights: 221 x 221 mm Clamping plates: 346 x 346 mm Screw diameter: 35 mm maximum dispensing volume: 90 cc F9p9g9hqc Shot weight PS: 80 g Locking force: 22.3 kN Port: 14,5 kW Accessories: Condition: good Weight: 1,5 t Dimensions: 3,300 x 1.700 x 2,000 mm more
1
screw size:80 mm injection shot weight in Polysterol:1.539 g clamping force:7750 kN : INJECTION UNIT: screw size:80 mm max. swept volumne:1.818 cm³ injection shot weight in Polysterol:1.539 g/PS injection pressure:1.900 bar : CLAMPING UNIT: closing pressure:775 t tie bar distance:1.150 x 950 mm mould hight - min.:600 mm opening stroke:1.320 mm : CONTROL: microprocessor control:B&R, IQT44 Badh8i82t8 screen text:deutsch / englisch Manual:deutsch / german : EQUIPMENT: robot interface:Eu... more
6
Manufacturer: Arburg Type: 320 KS- 700-250 (Selecta) Year: 2000 Controller: Selogica Operating hours: 61.000 h Clamping unit Clamping force: 700 kN/ 70 to. Platens size (h x v): 476mmx476 mm Distance tie bars (h x v): 320 mm x 320 mm Mould height min.: 200 mm opening stroke: 400 mm max. Dist. Daylight 650 mm ejector - stroke: 70 mm Ejector force forward/backward: 30 kN Injection unit Screw diameter: 30 mm Ls/D ratio: 23,3 Injection pressure: 2.470 bar Stroke volume: 106 ccm Shot weight, PS: 8... more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force Kunststoffspritzgiesspresse-250 to control Micro Control MC-3 opening stroke mm 820-sheet size 900 x 830 Machine weight 12.5 to Qkzt0ay2j more
1
screw size:18 mm injection shot weight in Polysterol:18 g/PS closing pressure:250 kN daylight:220 x 220 mm opening stroke:275 mm mould height - Max./min.:150 mm control:Selogica daylight between platens - max.:425 mm total power requirement:10,6 kW Bbc2rsdrgk weight of the machine ca.:1,9 t dimensions of the machine ca.: m S version I - highly wear resistant plastification unit - with Selogica control - technology stage 2 - servo-regulated with 2 regulating pumps - connection for mould blow ... more
6
Type / model: 220-75-250 Clamping force: 25 t Min mould installation height: 200 mm Opening stroke: 275 mm Maximum distance from the clamping plates: 475 mm distance between lights: 221 x 221 mm Clamping plates: 346 x 346 mm Screw diameter: 35 mm maximum dispensing volume: 90 cc Q3a9rj3b Shot weight PS: 80 g Locking force: 18.8 kN Connection: 11,2 kW Accessories: Condition: good Weight: 1,5 t Dimensions: 3,300 x 1.700 x 2,000 mm more
4
Many thanks for your interest on our Sollich enrober from type Temperstatic T4 820, please find below our offer: manufacturer: Sollich Type: Temperstatic T4 820 Enrobing machine OM: 2002 working width: 820 mm electrical: 220/380 V; 3 ph; 50 Hz different: hardly used Infeed table length 1500mm Bbgzpenwa2 We offer this machine in as-is where-is condition, without waranty, ex Warehouse Germany more
6
Manufacturer: Venyeskob, Type: Leistenspritzmaschine, Year: 1991, Control: Programm, Work piece width min-max mm: 10-300, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 8-60, Working widht max mm: 300, Spraying heads - total: 4, work piece cleaning: no, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 1, Laquer circles: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm... more
6
Manufacturer: Arburg Type: 320 KS- 700-250 (Selecta) Year: 2000 Controller: Selogica Operating hours: 61.000 h Clamping unit Clamping force: 700 kN/ 70 to. Platens size (h x v): 476mmx476 mm Distance tie bars (h x v): 320 mm x 320 mm Mould height min.: 200 mm opening stroke: 400 mm max. Dist. Daylight 650 mm ejector - stroke: 70 mm Ejector force forward/backw. 30 kN Injection unit Screw diameter: 30 mm Ls/D ratio: 23,3 Injection pressure: 2.470 bar Stroke volume: 106 ccm Shot weight, PS: 86 g... more
5
Formteilkantenanleimmaschine, Edge Bander, Kantenanleimaschine-max. Workpiece thickness 60 mm heater fan precoated edge cutting knife-edge plate transport dimensions 900/700/H1080 mm Weight 135 kg 3kwdlbdl more
6
injection shot weight in Polysterol 60 g/PS injection volume 237 cm3 cm3 / sec working pressure 140 Kg screw size 60 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m With robot WR 3A 500 Euromap: 5100 H - 2190 Screw diameter: 60 mm. Ratio L/D: 2 Injection theoretical capacity: 1074 cm3 Injectable volume pump: 237 cm3 / sec Specific injection pressure: 2,040 kg / Screw stroke: 380 mm. Screw force combination: 60 Kn Plasticization PS per hour: 140 kg... more
5
Clamping force: 50 t Min mould installation height: 225 mm Opening stroke: max. 325 mm Maximum distance from the clamping plates: 500 mm Cklq2cia distance between lights: 270 x 270 mm Clamping plates: 400 x 400 mm Screw diameter: 35 mm maximum dispensing volume: 90 cc Shot weight: 80 g Locking force: 31.1 kN Connection: 19 kW Accessories: Condition: good Weight: 1,8 t Dimensions: 3.700 x 1.700 x 1,800 mm more
3
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS closing pressure 1800 kN total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Mmhcl more
6
Injection unit for injection moulding machine ARBURG Fabr. No.: 141656 Screw diameter 30 mm Power supply (heating) 230 Volt, 50 Hz. Nozzle number 37.838 Cylinder outside diameter 80 mm -Cylinder and screw nozzle as a complete unit -4 piece heaters with the 1300 Watts, 350 ° C Housing dimensions L x W x H 600 x 160 x 210 mm Overall dimensions L x W x H 1150 x 160 x 210 mm Weight condition as new, unused Ssvslg more
2
NamafARBURG 270 S 250-60 Screw diameter: 25 mm Clamping force: 250 kN more
1
screw size:25 mm injection shot weight in Polysterol:49 g/PS closing pressure:800 kN daylight:420 x 420 mm opening stroke:450 mm mould height - Max./min.:200 mm control:Selogica daylight between platens - max.:650 mm Juumo3 total power requirement:29,9 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:4,50x1,30x2,00 m S version III - LCD control monitor, colour type - Selogica control - technology step 2 servoreg. with 2 regulating pumps - highly wear resistant plastification u... more
3
Injection molding machine boy 22A year 2001 Oocq9yop more
2
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS closing pressure 1750 kN Vrpwom total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Edges in glue and finishing machine Edge banding machine for straight and curly Work pieces -for the gluing of Kanternaterial 10-60 mm in PVC, melamine, veneer and plastic edges Banding station: -Caps scissors up to 3 mm edge thickness with foot Pedal operation -min. RADIUS in concave moldings: 20 mm -Glue tank, with adjustable heating -2 feed speeds 4 and 8 m / min. Gvi7y0 -Plates for edge roller d = 800mm Milling station: -When gluing on the milling station under the t... more
6
For sale a Wittmann is Battenfeld injection moulding machine MicroPower 15/10 year 2017. The machine no longer stands on the river. Hours of operation: approx. 3,000 Number of shots: approx. 36,000 D9orv7 Technical data injection unit Screw diameter: 14 mm Injection piston diameter: 8 mm Screw L/D ratio: 20 Specific injection pressure: 2,500 bar Computed displacements: 4 cm3 Injection weight (PS): 3.6 g Technical data clamping unit: Clamping force: 150 kN ... more
1
screw size:35 mm injection shot weight in Polysterol:97 g/PS closing pressure:1000 kN daylight:470 x 470 mm opening stroke:575 mm mould height - Max./min.:275 mm control:Selogica daylight between platens - max.:850 mm Eglc88kz total power requirement:33,4 kW dimensions of the machine ca.:5,30 x 1,70 x 2,20 m weight of the machine ca.:5,0 t S-version IV - with Selogica control - technology step 2 - with 2 servoregulating pumps - LCD control monitor, colour type - highly wear resistant plasti... more
4
Manufacturer: KRAUSS MAFFEI Type: KM200 - 900 B2 Year of construction: 1991 Clamping force: 200 tons Screw diameter: 55 mm Part weight: 410 g / PS Control: MC3 - R Facilities: 1 x core pulling Interface robot Changed in 2016 pumps Bbep9eof0h Clamping unit overhaul in 2016 In 2016 injection unit partially overhauled more
4
Injection moulding machine ARBURG 221-55-250 Year of construction: 1992 Cmbfonfe more
5
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS closing pressure 380 kN total power requirement kW weight of the machine ca. 17000 t dimensions of the machine ca. m 3zirwvlqk more
1
screw size:45 mm injection shot weight in Polysterol:286 g clamping force:1.500 kN : INJECTION UNIT: screw size:45 mm max. swept volumne:318 cm³ injection shot weight in Polysterol:286 g/PS injection pressure:2040 bar : CLAMPING UNIT: clamping force:150 t plate size:820 x 750 mm mould hight min.:250 mm opening stroke:700 mm : CONTROL: microprocessor control:CC100 screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:ja / yes core pull:2 x : OTHER DATAS: ... more
3
Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous ad... more
3
screw size:30 mm injection shot weight in Polysterol:97 g/PS closing pressure:600 kN daylight:370 x 370 mm opening stroke:500 mm mould height - Max./min.:250 mm Osiun0pr control:Selogica daylight between platens - max.:750 mm total power requirement:23,9 kW weight of the machine ca.:3,2 t dimensions of the machine ca.: m CS version - highly wear resistant plastification unit - with Selogica control - technology stage 2 - servo-regulated with 2 regulating pumps - drive for needle valve nozzle... more
Year 1987 Juu2ti Control unit MC88 Screw diameter 40mm Max injection weight PE 183g Heating power 10,7kW Clamping force 750kN Distance of tie bars 330mm Nozzle plate 490x540mm Clamping plate 490x540mm Maximum tool height 380mm Drive power 15kW more
4
Injection moulding machine ARBURG 221-55-250 Year of construction: 1992 Bbfyeg3ja9 more
6
screw size 50 mm injection shot weight in polystyrene 354 g/PS clamping force 1.600 kN ***** injection unit ***** injection unit vertical for processing thermoplastics screw size 50 mm max. swept volume 393 cm³ injection shot weight in polystyrene 354 g/PS spec. injection pressure increased 1.909 bar srew and barrel L/D 20 srew wear resistant S10 cylinder in bi-metall M9 regulated traverse cooling heating capacity 15,3 kW without material hopper ***** Clamping unit ***** mou... more
1
screw size:45 mm injection shot weight in Polysterol:286 g clamping force:1.500 kN : INJECTION UNIT: screw size:45 mm max. swept volumne:318 cm³ injection shot weight in Polysterol:286 g/PS injection pressure:2040 bar : CLAMPING UNIT: clamping force:150 t plate size:820 x 520 mm mould hight min.:250 mm opening stroke:700 mm : CONTROL: microprocessor control:CC100 screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:ja / yes core pull:nein / no : OTHER D... more
1
screw size 25 mm moulding weight 41,8 g Oiphs8gvy closing pressure 350 kN tie bars distance 304 x 304 mm opening stroke 325 mm dayligth 150 mm injection pressure 2149 bar total power requirement 14,5 kW weight of the machine ca. 2,2 t Control: Unilog 4000 B Machine has one pit draw. belt convoyer HB-Therm 80° Serial Nr. A35/04/11/0/05 more
6
rotational molding machine rotomolding machine Reinhardt RSO22 3 carriages (2 offset, 1 straight) max. load/carriage: 800kg max. mold dimensions: see photos M99u2 max. temperature: 400°C max. power burner: 580kW (Weishaupt LPG burner) max. electrical power: 78kW controller: SIMATIC S7 HMI: PC with SIMATIC WinCC The machine is expected to be in service on March 30, 2018 and can be visited during operation. The machine was regularly maintained. About 6 years ago, a new controller with PC-based ... more
Injection unit: 22D Standard Year 1993 Control UNILOG 1020 Screw diameter 25mm Maximum injection weight PE 34,8g Heating power 2,8kW Clamping force 25kN Bbe03xbnc3 Distance of tie bars 270mm Nozzle plate 470x280mm Clamping plate 450x259mm Maximum distance of both plates 450mm Drive power 7,5kW more
3
Injection molding machine boy 90 E Year of construction: 2010 Current hours of operation machine: ca 29500 h Pump: ca 20500 h Bbfxjwdukg more
2
screw size unbkt. mm M3glt injection shot weight in Polysterol unbkt. g/PS closing pressure 750 kN Control Hydronica total power requirement kW weight of the machine ca. 3,5 t dimensions of the machine ca. m more


chocolate ...
every day

New machines via email!

Be informed!

to

to

Change search
CHOCOLATE MOLDING MACHINE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close