Used Circular Saw Mill for sale (6,789)

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm Ibedpfxsmxi T Ao Agzsf HSS unused ,from magazine liquidation bearing number 28418

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Ibedpfx Ajvmtdkjgzef Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: Ibedpex H Uctofx Agzof spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Isdpfx Agevx N Ucezjbf Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: used, Berg & Schmid Compact 250 metal circular saw Machine is operational Clamping width approx.: 104 mm Swivels up to 45° with length stop For details and condition, see pictures Iedpfx Ajx Exbqogzebf

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Ibodpfx Agehkz Hiezof Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Circular saw blade HSS diameter 225 mm Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation Iodemxi T Ujpfx Agzebf

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Ibodpfx Aoxvquujgzsf Model: THKS 315 C / 2.80 DNB Year of manufacture: 2008 3-phase 400 Volt 50 Hz Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Saw blade guard Table extension

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Price changes reserved; errors, misprints and typographical mistakes excepted. Ibedpfxsx H Uigj Agzof

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen Ijdpfx Aewu Tz Rjgzsbf Machine weight: 605 kg

Condition: new, Year of construction: 2025, The JMY-870 sharpener is an excellent tool for sharpening circular saw blades. The sharpener is equipped with a durable, diamond grinding disc. This ensures precise and effective sharpening. The solid cast iron construction guarantees stability during work, and the adjustment of the angle of inclination and the angle of the saw provide full control over sharpening. Additionally, rubber pads under the feet minimize noise, ensuring comfort of work. Standardly equipped with a 125 mm diamond grinding wheel, it is suitable for sharpening saws from 80 mm to 700 mm in size. The most important advantages of this circular saw sharpener The sharpener is equipped with a high-quality 125 mm diamond grinding disc, which guarantees extraordinary precision when sharpening carbide saws. The cast iron base ensures stability during work. Thanks to this, the user can be sure that the device will not wobble or vibrate during sharpening. The sharpener is equipped with a tilting blade support, which allows you to adjust the angle of inclination from -35° to +45°. This allows you to precisely adjust the blade setting to the specific needs of the user. An additional function is the ability to set the saw's incisal angle in the range from +85° to -30°, which allows you to adapt the tool to different types of saws. The saw sharpener has been designed with work comfort in mind. Thanks to the rubber pads under the feet, the device works almost silently, which has a positive effect on the comfort of use. Application of the saw sharpener The sharpener is designed for sharpening circular saws. The operation of the device is intuitive and simple, which means that even people who are not familiar with the technique will be able to use this tool. The JMY-870 circular saw sharpener is a professional tool that ensures high quality saw blade processing and work comfort. Thanks to the various adjustment options, it is an excellent choice for people who require a precise and effective tool for sharpening various types of saw blades. THE SET INCLUDES A DIAMOND GRINDING WHEEL! Technical parameters MIN/MAX SAW DIAMETER 80mm - 700mm HORIZONTAL SAW BLADE HOLDER TILTING -35° to +45° Iedpfx Agsu Tti Ijzobf GRINDING SET TILTING -20° to +20° GRINDING DISC ROTATIONAL SPEED 2850 rpm DISC DIMENSIONS 125 x 10 x 13 mm MOTOR POWER 0.25 kW SUPPLY VOLTAGE 230 V NET WEIGHT 21 kg DEVICE DIMENSIONS 750 x 750 x 350 mm

Condition: good (used), Year of construction: 1988, Ulmia table saw Type 1710 S make no. 7270 Year of manufacture 1988 With sliding table With slotted hole drilling table / equipment Swivel saw blade Table extension Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 203 kg Ibjdpfxer Elm No Agzof Location: ex stock 54634 Bitburg - available immediately - Request more information

Condition: new, Fully automatic sawing and punching or drilling in one machine! For use with Ø 500 or 550 mm saw blades, reversing device for a maximum cut length up to 4000 mm Säge-Stanz Automat Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching, based on the Profilma 502 model • Fully automatic operation and Säge-Bohr Automat Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously Ijdjx Haftepfx Agzjbf • Fully automatic operation

Condition: new, Year of construction: 2025, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, main saw diameter: 400 mm, type of input current: three-phase, CIRCULAR SAW model SCM SI 4 . CN NEW machine in prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - electric and automatic NC mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out Ibedpfx Asglp I Njgzef with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50

Condition: used, Circular Saw Milling Machine KPSF2500-4.4, in good condition, 4.4 kW S1, 2700 mm cutting length, 2500 mm sliding table length, 700 kg Ibsdsx H Uimjpfx Agzof Price changes, errors, printing and typographical mistakes reserved.

Condition: good (used), Year of construction: 2005, Longitudinal saw in very good condition from a Swiss operation Ibsdpex E Nplefx Agzjf max. cutting length: 6200 mm max. cutting width: 420 mm max. cutting height: 170 mm with laser with control system

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm Iodpfsxlzytex Agzsbf -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Ibjdpfxjr Elmwj Agzjf Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, We offer you fully automatic circular sawing machines and complete sawing centers from the "Profilma", "KS", and "SW" series with blade diameters of up to 650mm. Loading magazines and unloading systems are tailored to your requirements. A high-performance extraction unit with oil mist separator completes the convenience package. Contact us – together we will find the optimal solution for your production! Iedpfsx E U Dnex Agzobf

Condition: good (used), functionality: fully functional, Special price: EUR 2,990,-- net Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: Iodpfx Aex Exyasgzsbf round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades Special price: EUR 4,150,-- net, loaded free!

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top Isdpsx Eb Anofx Agzebf - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: excellent (used), For sale is a used Felder K700 P panel saw with a cutting width of 800 mm. The machine is in very good condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: - Saw blade tiltable 90-45° - Sliding table 2000 mm Ibodpfxsxzgd Ao Agzof - Short mitre fence 1100 mm - Extension table with mitre fence 2600 mm - Cutting width 800 mm with fine adjustment - Cutting height 102 mm (Saw blade D=315mm) - 5.5 HP (4kW) motor, 400 Volt - Machine No. 80-10/212-01 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: Saw, circular saw, panel saw, panel Reference: R-N44KA

Condition: new, Year of construction: 2025, The new F 45 is a masterpiece of technology and design. The comprehensively redesigned machine frame combines absolutely unprecedented torsion resistance with extremely low levels of vibration, while the smooth front and clear foot space on the floor enable you to operate closer to the machine and the workpiece. The famously smooth running sliding table, which has received a number of design tweaks, remains the undisputed benchmark for precision cutting and minimal Isdpfsd Hz Etex Agzsbf maintenance. The crisp new industrial design underlines the distinctive quality of the Altendorf brand: It is an approach that brings together distinctive design and timeless aesthetics – recognised with the iF design award 2016. Altendorf’s new generation is unique in that we now have just the one model: the F 45. But this one model comes with a choice of three completely new control unit designs, each of which enables you to control up to four axes from the centrally positioned eye-level control panel. The only decision that remains for you to make is this: Which control unit shall it be? Machine equipment: - F 45 ProDrive in basic specification - Max. diameter of the disc 450 mm - 5,5 kW (7.5 HP), three speeds (3/4/5,000 rpm) - Two-axis scorer unit for one-way tilt - Sliding table, table length 3200 mm - Crosscut-mitre fence, stops to 3200 mm - CNC rip fence, cutting width 1300 mm - Duplex 1350 mm

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. Ibodpex Eycpsfx Agzof The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm Isdpsxzd Aijfx Agzjbf - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Reference: R-N1194