Claas disco 3050 plus for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Telescopic arm stacker Manitou MRT 3050 Privilege Plus

Friedrichsdorf, GermanyGermany dealership location
6546 km
2019
new
Vehicle data -Make: Manitou -Type: MRT 3050 privilege plus -Drive type: diesel -Load capacity: 5000kg -Load Centre of gravity: 600 -Height: 30000 mm Besyyezik2 -Range: 0 mm -Year of construction: 2019 -Operating hours: 133 -Internal No.: 260419 _____ Mast data -Mast type: telescopic -Height: 30000 mm -Height: 3050 mm -Free lift: 0 mm -Carriage: 0 mm -Forks: 1200 x 0 x 0 mm _____... more
5
High-performance, computerized Corona pre-treatment generators Technical data + description in PDF 8m20lsa more
14

Facing Lathes TADU FS750 CNC Facing Lathe. NUM T Plus Control. 1450mm swing

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1984
ready for operation (used)
Serial No. 13585 Swing over bed 1450 mm Swing over cross slide 600 mm Traverse Z axis 350 mm, X Axis 700 mm. Chuck to turret face 680 mm Be9ubopow7 Input 380/3/50 20 hp approx. Spindle Speeds 0 - 400 rpm Feed Rate variable 4 jaw chuck 1200 mm Tool post 6 way automatic Length 12' 6" / 3.81m Width 6' 4" / 1.93m Height 5' 10" / 1.77m Nett weight actual. 6,550 Kgs / 6.45 Tons more
6

Bed type Correa Milling machine CORREA CF22/25-PLUS - 967396CF22/25-PLUS

Burgos, SpainSpain dealership location
6032 km
2001
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2500 x 700 mm Number of slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: NEW! 2,5º Auto indexi... more
2
Type Discotherm, No 2549.01.01.01.01.2549, New 1990, Material Stainless steel 1.4435 (316L), Paddle dryer (1x) make List AG Pratteln, Capacity 2,7 Ltr, Trough sizes dia. 140x190mm, Working pressure vac/6 bar, Test pressure 7,8 bar, With jacket (0,4 Ltr), Working pressure 4 bar, Test pressure 5,2 bar, Max. temperature 250 Degr. C., With mechanical seal , Motor 1,1 KW, 220/380 Volt, With switchgear , Floorspace 0,7x0,6 M, Total height 0,7 M What you can expect from Foeth: all our machines are in w... more
9

Book block processing / book MECCANOTECNICA ASTRONIC 180 with Plus-Stacker

Espelkamp, GermanyGermany dealership location
6446 km
2006
ready for operation (used)
Book sewing machine: computer programming device on swivel arm with coloured touch screen automatic investors with SignaLynx sheet control plus stacker with rolling car export - pressure vacuum pump Be99tjsurw more
15
Full Storti nailing line including Flex 60 deck machine (2004) (4 planes), Total of 3 nailing heads Vsoydi Includes • Flex 60 Deck Machine • Block Cutter • automatic deck feeder, • Second Nailing head • Rotator device • Turnover device • Third Nailing head 4 head corner cutter • chamfering machine, • 6 head brander, • Turnover Device • out feed conveyor We would sell the deck machine separately for €69,000. Line separately €100,000 Can be seen working in Ir... more
4
Fagor CPU-KCF 8055 PLUS-T /V: H: 48A / S: 12.21 , serial number according to photo, used, normal traces of use, 100% functional, supplied photos Ptz8gq more
13

CNC Vertical Machining Centres MAZAK VTC20B Vertical Machining Centre with Mazatrol M-Plus Control.

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1996
ready for operation (used)
Serial No. 121550 Control Mazatrol M plus Table size 1460mm x 510mm Table load 500 kgs Longitudinal traverse X axis 1120 mm Cross traverse Y axis 510 mm Vertical traverse Z axis 510 mm Speeds 40 - 7000 rpm Spindle taper BT40 Automatic tool changer yes Number of tools 24 Tool length 350 mm Tool diameter 80 mm Tool weight 8kgs Input 415/3/50 11 kw approx Fitted with coolant Length 10' 8" / 3.25m Width 10' 2" / 3.10m Be9ube8jc3 Height 9' 2" / 2.79m Nett weight actual. 6,320 Kgs / 6.22 Tons... more
7

Injection moulding machines Battenfeld PLUS 35/75

Kaiserslautern, GermanyGermany dealership location
6526 km
2010
ready for operation (used)
Control Unit Brand Battenfeld Injection Unit Nnia2 Screw diameter 18 mm Shot weight 23 g (PS) Injection pressure 3038 bar Clamping Unit Clamping force 350 kN Opening stroke 200 mm Max open daylight 450 mm Distance between bars 270 mm Mould height max 150-250 mm Size of mold platens 470 x 280 mm Ejector stroke 100 mm This Battenfeld PLUS 35/75 Injection Moulding Machine was built in Germany in 2010. Equipped with a control unit of the same brand, this machine incorporates a clamping force of... more


claas disc...
daily

New machines via email!

Stay updated!
2
Make Brabender Technologie, Type DDW-MD5-FW40 / 3plus-50, No 03035306899, New 2004, Material Stainless steel, Metering screw , Screw diameter dia. 40mm, Inlet dia. 195mm, DN200 WAREX DKZ 103, Outlet dia. 100mm, With motor 0,55 KW 230 Volt (Ex), Hopper with flexible wall , Mounted on frame , With switch , Floorspace 1,2x0,5 M, Total height 1,3 M, Weight 200kg, Extra Specifications ATEX II 1/2D T135 What you can expect from Foeth: all our machines are in working condition, and at a reduced price c... more
9

Muller Martini Saddle Stitchers Muller Martini Bravo Plus saddle stitcher- 2007

Heanor Derbyshire, United KingdomUnited Kingdom dealership location
5791 km
ready for operation (used)
IN STOCK Jvbygm 1 x Stitching unit -3801 x Touch screen controls2 x Stitching heads HK75Q    1 x Stitch control monitor1 x Oblique sheet saddle monitor1 x Remote control jogger inch4 x Section feeders 3701 x Cover folder feeder 15291 x Three knife trimmer 4491 x Stream belt delivery 1564 Optional if required; Muller Martini Apollo stacker delivery4/5th knife attachment for centre cut double productionWaste removal system more
15
Drilling and press-in machine for all variants of moebel beschlaegen as well as for drilling the hole row with a lot of accessories and 3 drilling gears Drive motor 1.6kW Hole row drill head 90 degrees rotatable, 19 spindles with 2 sampling pins for 5mm (continued fittings), hole row 32mm, with quick-release chuck 3-spindle-pot-tape drill head Hettich 52-5,5 without quick-release chuck 4-spindle drill head for fittings etc. with quick-release chuck 2 pneumatic factory tensioners ... more
6
Joining, veneering and plate cutting machine Metn99x8 - Cutting and milling length: 3050 mm - With joining unit - Manual feed by means of a handle bar - Double linear guide shaft 3500 mm Operating voltage: 400 volts Cutting and milling height: 45 mm Saw station: P= 2.2 KW Saw blade: 200 mm Milling station: P= 1.1 KW Cutter dimension: 85/50/35 mm CE - Execution Location: Comes to Camp 54634 Bitburg - available at short notice - more
10

Machining Center - Vertical MATSUURA R. PLUS-800

Großhansdorf, GermanyGermany dealership location
6490 km
2006
used
control Siemens 840 DI x-travel 800 mm y-travel 550 mm z-travel 500 mm distance spindle center to column 590 mm pallet: working range on pallet 1150~550 mm carrying capacity of pallet 300 kg type of pallet-changer 2 - fach change time of pallets 11 s spindle: spindle tunring speed 40~20000 U/min spindle cone HSK 63 tool changer: number of tool places 30 Pos. tool taper HSK 63 max. tool diameter 96 mm max. tool-dia with free toolbox 175 mm max. tool length 101,6 mm max. tool weight 10 k... more
15

Laser cutting machines LVD Implus 4030

Kaiserslautern, GermanyGermany dealership location
6526 km
2000
ready for operation (used)
General Data Measurements width 13285 mm Measurements depth 8534 mm Measurements height 2050 mm Control Unit Brand Fanuc Model LVD Series 16-L CNC main language English Main Drive Laser power 4 kW Plasma brand GE Fanuc C4000A Laser type CO2 Movement X-Axis Movement 3150 mm Y-Axis Movement 4070 mm Z-Axis Movement 280 mm Workpiece Be9h8aw38j Workpiece X 4000 mm Workpiece Y 2000 mm Workpiece weight 2400 kg Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 10 mm Media Main el... more
2
Make brabender technologie, Type "sackschütte mit fw80 /3plus", No 03035306900, New 2004, Material Stainless steel, Metering screw , Screw diameter 80mm, Screw length 500mm +/-, Hopper sizes +/- 600x500mm x1000mm, Inlet dia. 210mm, Outlet dia. 160mm, With motor 0,55kW 230/400 Volt, with knocker, Hopper with flexible wall , Mounted on frame , Floorspace 1,6x0,7m, Total height 1,5m, Weight 180kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price comp... more
12

Muller Martini Saddle Stitchers Muller Martini Bravo Plus Amrys saddle stitcher- 2006

Heanor Derbyshire, United KingdomUnited Kingdom dealership location
5791 km
ready for operation (used)
1 x stitching unit 380 with Amrys2 x stitching heads HK751 x stitch control monitor1 x saddle oblique sheet monitor1 x remote control jogger inch6 x section feeders 370 with Amrys & Asir1 x cover folder feeder 1554 with Amrys & Asir1 x three knife trimmer 449 with Amrys1 x Perfetto stacker delivery with Amrys E8880kn more
5

Bed Type Milling Machine - Universal MTE Kompakt Plus

Niederlangen, GermanyGermany dealership location
6338 km
2004
used
x-travel:2000 mm y-travel:800 mm z-travel:1000 mm table surface area:2200 x 750 mm T-slots:5 T-slot - width:18 mm T-slot - distance:140 mm table load:4 t feed stepless:0 - 10000 mm/min turning speed range:40 - 3000 U/min rapid traverse:0 - 15000 mm/min tool adaptor:SK 50 DIN 69871 spindle drive:15 / 22 kW Tool changer:ja total power requirement:ca. 30 kW weight of the machine ca.:10 t Bhw3pd3i dimensions of the machine ca.:5,5 x 4,5 x 2,5 m :20 ATC tool changer (arm type) Hydraulic tool cl... more
4

Robot IRB 2400L S4CPlus M2000

Bilbao, SpainSpain dealership location
6053 km
ready for operation (used)
Technical DataPayload: 0/7 KgArm reach: 1.80 mmNumber of Axis: 6Repeatability: 0.03 mmRobot weight: 380 KgMounting: FloorTechnical Data: • Payload: 7Kg. • Arm Reach: 1800 mm. • Repeatability: 0.03 - 0.07 mm. • Controller: M2000 S4CPlus. Axis motion speed: • Axis 1: 150º/s • Axis 2: 150º/s • Axis 3: 150º/s • Axis 4: 360º/s • Axis 5: 360º/s • Axis 6: 450º/s Applications Assembly of parts ... more
3

Temperature control unit Wittmann pro2 TP-Plus 2: 140

Strassenhaus, GermanyGermany dealership location
6460 km
2006
used
: temperature max.:140 ° : connected load: kW air volume: m3/h blower power: kW dew point of the dry air: temperatur range: °C Bfbm8l9vn2 weight of the machine ca.: kg dimensions of the machine ca.: Type pro2 TP-Plus: 2:140 year of building: 2006 temperature till 140°C - water operation - (2 devices available) - good condition - slightly used - - function tested - more
11

Injection moulding machines Battenfeld PLUS 250V50

Kaiserslautern, GermanyGermany dealership location
6526 km
1998
ready for operation (used)
General Data Machine weight 1200 kg Control Unit Brand SIEMENS Model S7 Injection Unit Screw diameter 22 mm Be9ibjt00u Clamping Unit Clamping force 250 kN Ejector stroke 100 mm Additional Equipment Turntable with two-sided loading possibility Sprue gripper for horizontal removal of sprues Double-sided laser length control of the inserts from the turntable This Battenfeld PLUS 250V50 Injection Moulding Machine was built in 1998 in Germany and has been working for 9750 hours since then. Equi... more
1
Make Boekels, Type Discovery P 34,1, No 6-1523-034000S, New 2001, Material Ceramic, Stainless steel, Metal detector "Search coil" (1x), Product space dia. 250mm, With valve type ARK-25 NW250 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machin... more
10

Muller Martini Saddle Stitchers Muller Martini Bravo Plus Amrys saddle stitcher-2007

Heanor Derbyshire, United KingdomUnited Kingdom dealership location
5791 km
ready for operation (used)
IN STOCK 1 x stitching unit 380 with Amrys1 x Touch screen controls2 x stitching heads HK75      ONLY 00091 hours1 x caliper control with rejecy1 x stitch control with reject1 x remote control jogger inch5 x section feeders 3701 x cover folder feeder 15291 x three knife trimmer 4491 x stream belt delivery 1564 Nnj0l Optional; OMG Cucciolo stacker (2008)Centre cut devise for double productionSmall szie kit for feedersSlim line stitching headsLoop ( omega) stitching headsWaste remov... more
4

Bunsen Burner IBS FIREBOY PLUS

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
5928 km
ready for operation (used)
Condition Used Listing name IBS FIREBOY PLUS Bunsen Burner The IBS Intergra Boisciences Fireboy Plus Bunsen Burner is a mobile Bunsen burner compatible to all common gas types such as propane, butane, town gas and natural gas. Bd9srqqpf7 ————— ITEM LOCATION: Germany SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF060 more
5

Robot IRB 6650 Shelf S4CPlus M2000

Bilbao, SpainSpain dealership location
6053 km
ready for operation (used)
Technical DataPayload: 0/125 KgArm reach: 3.50 mmNumber of Axis: 6Repeatability: 0.13 mmRobot weight: 2250 KgMounting: FloorTechnical Data: • Payload: 125 Kg • Maximum Reach: 3500 mm • Repeatability: 0.1 mm • Controller: M2000 S4CPlus Axis motion speed • Axis 1: 110º/s • Axis 2: 90º/s • Axis 3: 90º/s • Axis 4: 150º/s • Axis 5: 120º/s • Axis 6: 235º/s Applications Stud Welding ... more
6
Make: MDP Type: UP 100 Plus Built: 1969 Power max: 100 x 12 Be2tz9bwuu Dimensions: approx. L 1.60 x W 0.90 x H 1.60 m Weight: approx. 1.5t Accessories: - Tool: 45mm/ 35mm/ 60mm/ 48mm/ 32mm/ 70mm All information without information. A preliminary tour is possible at any time in our exhibition hall. more
9

Injection moulding machines HAITIAN Jupiter II Plus

Kaiserslautern, GermanyGermany dealership location
6526 km
2018
ready for operation (used)
General Data Measurements width 4100 mm Measurements depth 12000 mm Measurements height 3600 mm Machine weight 84000 kg Injection Unit Screw diameter 120 mm Shot weight 5661 PS Injection pressure 1710 Plasticising rate max 138 g/s Screw speed 102 rpm Heating capacity 91.5 kW Clamping Unit Clamping force 16000 kN Opening stroke 3250 mm Distance between bars 1550x1450 mm Mould height min 700 mm Mould height max 1550 mm Ejector stroke 400 mm Ejector force for / back 330 kN General Data Measureme... more
2
Make Brabender technologie, Type ddw md6-fw80/3plus-200, No 03035306907, New 2004, Material Stainless steel, Metering screw , Screw diameter 80mm, Pitch +/-40mm, Screw length +/- 500mm, Hopper sizes +/-500x600mm x 500mm, Inlet dia. 450mm, Outlet dia. 200mm, With motor (Ex.) 0,55 kW 230/400 Volt, with knocker, Hopper with flexible wall , Mounted on frame , With switch , Floorspace 1,3x0,8m, Total height 1,3m, Weight 260kg What you can expect from Foeth: all our machines are in working condition, ... more
8

Muller Martini Saddle Stitchers Muller Martini Bravo Plus Amrys saddle stitcher- 2007

Heanor Derbyshire, United KingdomUnited Kingdom dealership location
5791 km
ready for operation (used)
1 x stitching unit 380 with Amrys1 x touch screen controls with job storage and auto make ready2 x sticthing heads HK751 x caliper control with reject1 x stitch control monitor1 x oblique sheet saddle monitor1 x remote control jogger inch6 x section feeders 370 with Amrys1 x cover folder feeder 1554 with Amrys1 x three knife trimmer 449 with Amrys1 x stacker delivery Perfetto 450 Be9z0qzuok more
2

Bunsen Burner IBS FIREBOY PLUS

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
5928 km
ready for operation (used)
Condition Used Listing name IBS FIREBOY PLUS Bunsen Burner The IBS Intergra Boisciences Fireboy Plus Bunsen Burner is a mobile Bunsen burner compatible to all common gas types such as propane, butane, town gas and natural gas. ————— ITEM LOCATION: Germany Nj7vn SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF103 more
4

Robot IRB 6400R S4CPlus REX

Bilbao, SpainSpain dealership location
6053 km
ready for operation (used)
Technical DataPayload: 0/120 KgArm reach: 2.50 mmNumber of Axis: 6Repeatability: 0.10 mmRobot weight: 1910 KgMounting: FloorTechnical Data: • Payload: 120/150Kg. • Arm Reach: 2,5 mm. • Repeatability: 0.1 mm. • Controller: M2000 S4CPlus. Axis motion speed: • Axis 1: 100º/s • Axis 2: 100º/s • Axis 3: 100º/s • Axis 4: 210º/s • Axis 5: 150º/s • Axis 6: 210º/s Applications Stud Welding ... more
6

Guillotines / Shearing HACO HSL 3013 3050mm x 13mm Hydraulic Guillotine. Manufactured 1990

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1990
ready for operation (used)
Pgmv0aqc Serial No. 64964 Capacity 13mm x 3050mm Back gauge Powered Rapid blade adjustment Yes Variable rake Yes Work supports 4 @ 900mm Squaring arms 1 @ 1000mm Input 415/3/50hz Clamps 18 x Hydraulic Read-out to back gauge Metric Actuated via Wander Type Footswitch Length 4100mm Width 2050mm Height 2300mm Nett weight actual. 8,880 Kgs / 8.75 Tons more
7

Laser cutting machines Trumpf Trumatic L3050

Kaiserslautern, GermanyGermany dealership location
6526 km
2005
ready for operation (used)
General Data Measurements width 6500 mm Measurements depth 5900 mm Measurements height 2000 mm Machine weight 7100 kg Control Unit Brand SIEMENS Model SINUMERIK 840 D CNC language customizable Yes Main Drive Laser power 5 kW Laser type TLF 5000 Laser brand Trumpf Movement Sqmf8ydw X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Workpiece Workpiece weight 500 kg Media Power consumption 105 kVA Additional Equipment Load Master This Trumpf Trumatic L3050 Laser Cutting Machine was built in ... more
2
Make Brabender technologie, Type DDW-MD6-FW80 / 3plus-200, No "manufacturing tag is missing" , New 2004, Material Stainless steel, Metering screw , Screw diameter dia. 80mm, Inlet dia. 215mm, Outlet dia. 165mm, With motor 0,55 KW 230 Volt (Ex.), Hopper with flexible wall , Mounted on frame , Floorspace 1,5x0,7 M, Total height 1,8 M, Weight 340 KG, Extra Specifications ATEX II 1/2D T135 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to n... more
11

Muller Martini Saddle Stitchers Muller Martini Bravo Plus Amrys saddle stitcher- 2004

Heanor Derbyshire, United KingdomUnited Kingdom dealership location
5791 km
ready for operation (used)
1 x stitching unit - 380 with Amrys1 x touch screen controls1 x stitch control monitor1 x oblique sheet saddle monitor1 x remote control jogger inch6 x section feeders 370 with Amrys1 x cover folder feeder 1554 with Amrys1 x three knife trimmer 449 with Amrys1 x stacker delivery Practico with Amrys Tu9nlwgq more
7

Fan HeliFAN FANci3 HeliFAN plus

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
5928 km
2003
ready for operation (used)
Bd9rxs0fxg Condition Used Stock Number 00004 This listing is for a HeliFAN Plus Breath Analysis more
3

Robot IRB 1400 S4CPlus M2000

Bilbao, SpainSpain dealership location
6053 km
ready for operation (used)
Nnkpj Technical DataPayload: 0/5 KgArm reach: 1.44 mmNumber of Axis: 6Repeatability: 0.05 mmRobot weight: 225 KgMounting: FloorTechnical Data: • Payload: 5Kg. • Arm reach: 1440 mm. • Repeatability:± 0.05 mm. • Controller: S4C M98A Axis motion speed: • Axis 1: 110º/s • Axis 2: 110º/s • Axis 3: 110º/s • Axis 4: 280º/s • Axis 5: 280º/s • Axis 6: 280º/s Applications Assembly of parts ... more
6

- USED - SURFACE GRINDING MACHINE DELTA SYNTHESIS 1100/600 COMPACT PLUS

Matelica (MC), ItalyItaly dealership location
7203 km
1999
ready for operation (used)
MAX GRINDING LENGTH: 1100 mm MAX GRINDING WIDTH: 600 mm MAX GRINDING HEIGTH: 400 mm Be9fm8xcvz DISTANCE BETWEEN SPINDLE AXIS-TABLE: 600 mm LONGITUDINAL TRAVEL: 1150 mm TRANSVERSAL TRAVEL: 550 mm VERTICAL TRAVEL: 400 mm TABLE SIZE: 500 x 1300 mm MAGNETIC CHUCK: 500 x 1000 mm DISTANCE BETWEEN THE COLUMNS: 2100 mm MAX ADMITTED LOAD: 1000 Kg GRINDING WHEEL DIMENSIONS: 50 x 127 x 400 mm GRINDING WHEEL SPEED: 1450 rpm MOTOR POWER: 8,8 Kw CONTROL UNIT: COMPACT PLUS WEIGHT: 4300 Kg OVERALL DIMENSIONS: ... more
11

Lathes Victor VT Plus/15

Kaiserslautern, GermanyGermany dealership location
6526 km
1997
ready for operation (used)
General Data Measurements width 2050 mm Measurements depth 1525 mm Measurements height 1800 mm Machine weight 3800 kg Control Unit Brand FANUC Model Series O-T CNC main language English Main Drive Number of spindles 1 Spindle speed range 6000 Movement X-Axis Movement 150 mm Z-Axis Movement 320 mm Workpiece Workpiece drm 260 mm Workpiece X 420 mm Turret Number of turrets 1 Be8jmqghxz Tools Slots in storage 12 Type of tool holder 20mm Shank Media Main electronic connection 380 V Additiona... more
1
Make Boekels, Type Discovery P 34,1, No 6-1523-034000S, New 2001, Material Ceramic, Stainless steel, Metal detector "Search coil" (1x), Product space dia. 250mm, With valve type ARK-25 NW250 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machin... more
2
: temperature max.:140 ° Bbjigr2g : connected load: kW air volume: m3/h blower power: kW dew point of the dry air: temperatur range: °C weight of the machine ca.: kg dimensions of the machine ca.: Type Tempro plus C-140 (TP+C-S2:140 SO-C) year of building: 2010 temperature till 140°C - water operation - (2 devices available) - good condition - slightly used - - function tested - more
3

Interchangeable Block Heater EPPENDORF Thermostat Plus

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
5928 km
ready for operation (used)
Condition Used Hyl3fxb Listing name EPPENDORF Thermostat Plus Interchangeable Block Heater This listing is for a Thermostat Interchangeable Block Heater: A compact, benchtop thermostat that accurately maintains tube, microplate and vial temperatures between -5° and +99°C. ————— ITEM LOCATION: Germany SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF008 more
3

Robot IRB 6600 S4CPlus M2000

Bilbao, SpainSpain dealership location
6053 km
ready for operation (used)
Technical DataPayload: 0/175 KgArm reach: 2.55 mmNumber of Axis: 6Repeatability: 0.10 mmRobot weight: 1700 KgMounting: FloorTechnical Data: • Payload: 175 Kg • Maximum Reach: 2550 mm • Repeatability: 0.1 mm • Controller: M2000 S4CPlus Axis motion speed • Axis 1: 100º/s • Axis 2: 90º/s • Axis 3: 90º/s • Axis 4: 150º/s • Axis 5: 120º/s • Axis 6: 190º/s Applications Stud Welding ... more
6

- USED - 3D MEASURING MACHINE METRIS KRONOS PLUS 80.20.15 CNC

Matelica (MC), ItalyItaly dealership location
7203 km
2008
ready for operation (used)
X-AXIS TRAVEL: 8000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 1500 mm CAPACITY: 5000 Kg NOTE: DRIVEN HEAD RENISHAW mod. PH10M Be9fk282js PRICE: On demand more
11

Laser cutting machines Trumpf Trumatic L3050

Kaiserslautern, GermanyGermany dealership location
6526 km
2003
ready for operation (used)
General Data Measurements width 11000 mm Measurements depth 4600 mm Measurements height 2400 mm Machine weight 12000 kg Movement X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Z-Axis Movement 100 mm Max Material Thickness Steel 25 mm Bffcjfnxds Media Power consumption 105 kVA Chip conveyor Yes Internal cooling Yes This Trumpf Trumatic L3050 Laser Cutting Machine was built in 2003 in Germany and has been working for 35717 hours since then. Operated through a control unit of the same brand, ... more
2
Make Brabender Technologie, Type DDW-MD5-FW40/3plus-35, No 03035305896, New 2004, Material Stainless steel, Metering screw , With hopper (valbuis), Hopper sizes dia. 700mm to dia. 190mm, height 1,8m, Inlet dia. 200mm, Outlet dia. 150mm, With motor 0,55kW, Mounted on frame , Floorspace 1,4x0,8m, Total height 2,3m, Weight 350kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide.... more
15

CNC bed machines VH 3000 Plus

Babberich, NetherlandsNetherlands dealership location
6312 km
ready for operation (used)
Make Anayak Spain 2001 YOP Technical data X2c8pmiq X-axis3000 mm Y-axis2000 mm Z-axis1250 mm Table load in kG8000 Kg Power spindle30 kW Dimensions Length 8000 mm Width 4500 mm Height ... more
2

Bunsen Burner IBS FIREBOY PLUS

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
5928 km
ready for operation (used)
Condition Used Listing name IBS FIREBOY PLUS Bunsen Burner The IBS Intergra Boisciences Fireboy Plus Bunsen Burner is a mobile Bunsen burner compatible to all common gas types such as propane, butane, town gas and natural gas. Qq8ldh72 ————— ITEM LOCATION: Germany SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF062 more
12

Saddle stitchers Müller Martini Müller Martini Prima Plus

Schijndel, NetherlandsNetherlands dealership location
6281 km
2006
ready for operation (used)
Universal bases, positions:: 6, Horizontal signature feeder, model: 370 -- 5x, Cover feeder, model: 1528, Excluding pump(s), Mini-infeed, total: 5, Stream feeders, model: 3738 - 5x, Stitching unit: 0390 (Prima Plus), Oblique sheet control, Colour monitor(s), Stitching head(s), model: HK 75 - 2x, Trimmer, model: 0449, Sets of knives: 1x, Compensating stacker: Rima RS1013-S. no 108319-10, Age: 2006, Delivery to the left, Airtable delivery T0pibnq8 more


claas disc...
daily

New machines via email!

Stay updated!

to

to

Edit search
CLAAS DISCO 3050 PLUS
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.