Used Cnc Control Panel for sale (51,388)

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A Iaedpfx Ash Ecnajbvju year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Demag spare part panel Iasdpfxsqvuigs Abvsu

Condition: like new (used), SINUMERIK machine control panel MCP 483 MPI/PROFIBUS-DP, width 19" Membrane keys 22mm EMERGENCY STOP is not included in the scope of delivery Ijdpsrnkh Ssfx Abvoau Was stored as a spare part

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. Iajdpexv A Srjfx Abvsu The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim Isdpfx Abeynwx Sovoau A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Iodpfxsynwxxo Abveau Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: good (used), Two-hand control consoles, various versions, some equipped with emergency stop button, green or grey, some with stand, as shown in the photos. Price refers to green console without button. Iaodpfx Aexwm Ersbvou

Condition: new, Year of construction: 2023, machine/vehicle number: MR005937, Universal drilling and grooving CNC machine. Easy to use, compact, and fast in processing. The machine is equipped with the following options: - Panel end sensor - Z-axis pressure increase (recommended for hard materials) - Maestro CNC software - Keyboard type: Qwerty - Fan for electrical cabinet cooling - Automatic lubrication system Technical specifications: Iaodpfx Ajwy U A Hjbveu - Minimum panel thickness: 10 mm - Maximum panel thickness: 50 mm - Minimum panel length: 300 mm - Maximum panel length: 3000 mm - Minimum panel width: 90 mm - Maximum panel width: 900 mm - Positioning speed: 20 m/min - Number of vertical drilling spindles: 7 pcs - Number of horizontal drilling spindles (Y-axis): 2 pcs - Number of horizontal drilling spindles (X-axis): 2 pcs - Integrated grooving saw blade: Yes - Diameter of grooving saw blade: 125 mm - Motor power: 3 HP - Serial number: KK00039354

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Iodpfxewhi Sre Abvjau Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: used, Fanuc a16b-3200-0330 control unit PLC CNC Control Robot Board RJ3 Main CPU Condition: USED Item comes from a warehouse liquidation 16b-3200-0330 Iasdpfeu D Eaiex Abveu

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. Iodpfjt Dyl Sjx Abvjau +F00 SN 158.719A

Year of construction: 2024, condition: new, NEW , NEVER USED Demag Panel NC3 MAde in Germany width-30CM height-5CM Iodpfx Abouz Uq Esveau length-50CM TYPE: 6EJ5 398-0DE14

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Iasdpfx Abewwt Treveu Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: used, Year of construction: 2002, operating hours: 14,643 h, functionality: fully functional, overall weight: 1,500 kg, load capacity: 165 kg, arm reach: 2,650 mm, controller manufacturer: Fanuc, controller model: R-J3IB, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: AC, warranty duration: 2 months, Fanuc Corporation Robot with Controller, Teach Pendant & Cables, R 2000iA 165F, R J3iB Model: R2000iA165F Type: RJ3iB Condition: Used Iajdpfx Aow Nq Agsbveu General: Proven FANUC complete system with low operating hours – fully operational, including control cabinet, teach pendant and cable set in good condition. Operating hours: 14,643.7 Robot Arm Model: R-2000iA/165F Type: A05B-1324-B203 Year of manufacture: 2002.05 Payload: 165 kg Reach: 2,650 mm Axes: 6 Weight: 1,210 kg Teach Pendant Type: A05B-2301-C205 Year of manufacture: 2008-05 Control Cabinet Model: R-J3IB Type: A05B-2453-B252 Year of manufacture: 2002-05 Electrical Data: Voltage: 380-415/440-500V AC Frequency: 50/60Hz Power: 12kVA

Condition: used, Year of construction: 2000, operating hours: 45,954 h, functionality: fully functional, overall weight: 1,500 kg, load capacity: 165 kg, arm reach: 2,650 mm, controller manufacturer: Fanuc, controller model: R-J3, teach pendant manufacturer: Fanuc, warranty duration: 2 months, Equipment: documentation/manual, Fanuc Corporation robot with controller, teach pendant & cables, S 430iW, R J3 Model: S430iW Type: RJ3 Condition: Used General: FANUC industrial robot complete system – fully functional, supplied with control cabinet, teach pendant, and cable set, all in good condition. Operating hours: 45,954 Robot arm Model: S-430iW Type: A05B-1321-B203 Year of manufacture: 2000.04 Payload: 165kg Reach: 2,650mm Axes: 6 Weight: 1,300kg Teach Pendant Type: A05B-2301-C395 Year of manufacture: 1999-09 Control cabinet Model: R-J3 Type: A05B-2401-B042 Year of manufacture: 2000-03 Electrical data: Voltage: 380-415/440-500V AC Iasdpfx Aow Nq Ddjbvou Frequency: 50/60Hz Power: 15kVA

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. Iaedpfxjtdg Evj Abvsu We are also happy to process your acceptance parts in advance.

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 Iaedpeimwtrjfx Abvju - s/n 06 - CE rules (year 1998)

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, CNC control for Wenzel Iaodpfx Aov Irygjbvou Type WPC2000 including control cabinet and handheld unit

Condition: good (used), Year of construction: 2017, functionality: fully functional, Lovati BEM 31 numerical control CNC machine for processing flat glass Year of production 2017 Power 40 KW max. size of glass 3200 x 1650 equiped with tilting loading table Iaedpjtz T Saofx Abveu Machine is in a good condition working in the factory. Possibility to see it at work.

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Iajdpfogb Ec Hsx Abvsu Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: ready for operation (used), Control Techniques 3130.0417 Side 2 Drive Board 7004-0318 ISS B used 100% functional Isdpei D Um Nsfx Abvjau

Condition: ready for operation (used), Control Techniques 190U2B300BARAA215320 Servo motor SN:867324 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Isdpfx Astt Hnkobveau

Condition: ready for operation (used), Control Techniques SA038 SPINDAX AC Spindle Drive , serial no. according to photo, used, small traces of use, 100% functional, scope of delivery according to photos Iodpei D Unfjfx Abvjau

Condition: ready for operation (used), Control Techniques SA038 SPINDAX AC Spindle Drive , serial no. according to photo, used, small traces of use, 100% functional, scope of delivery according to photos Isdpei D Um Eefx Abveau

Condition: ready for operation (used), Control Techniques CD II 75 frequency inverter , serial no. according to photo ,used, normal traces of use, 100% functional, scope of delivery according to photos Iasdpfx Asi D Umzsbvou