Combi folder buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Size max. 76 x 100cm size min. 14cm x 24cm; Presentation folders of many kinds , Special Envelopes,CD/ DVD wallets with 1 or 2 pockets, CD/ DVD wallets with 1 to 4 reinforced compartments , Photograph Frames , Photograph pockets with two compartments , Book covers with flaps , Flexible book covers , Simple inline boxes and tent cards , Baxlxyt0 Office files and medical case note files more
8
combined folding machine Stahlfolder KH 78-6-KTL-PFH 82 age 2005 (checked and cleaned condition, all rollers, belts refurbished) max. size in crossfolding 78 x 120cm max. size in parallel folding 82 x 120cm min. size 14x18cm max. speed 230m/min. in parallel folding max. speed 200m/min. in cross folding Vbww0swhb pallet feeder PFH-82 with Tremat and MCT pocket folding unit BUH 1. Station with six pockets working width 82 cm, rear mounted slitter shaft cross folding unit BC... more
4
FORMAT 76x100 Hgaamlvy pocket wallet folder very good condition, Robatech hotmelt gluesystem with 2 guns (MHGraphics is Fidia-dealer) warranty 3 months on parts price includes installation and instruction (3 days) in European Community transport Hotel etc. paid by customer price when new:Euro 150.000 more
4
Size with flatpile feeder: max 780 x 1.200 mm min 140 x 180 mm Speed: max 50.000 c/h Pile height: max.800 mm Equipment: feeder: • flat pile feeder 1st folding unit: • 4 buckle plates • buckle plates with swing deflectors 2nd folding unit: • cross-fold knife 333djbvab • parallel-fold knife 3rd folding unit: • third-fold knife • noise prevention over all three units 4th folding unit: • knife folding unit delivery: • SPH-70 more
1

Folder Gluer FIDIA Combi-Estro

Krefeld, GermanyGermany dealership location
6379 km
2006
used
Size max. 76 x 100 cm, size min.: 140 x 240 mm, Paper weight: from 120 to 400 gr - Presentation folders with capacity , Envelopes with capacity, Capacity CD / DVD packaging, Capacity folders with curved or oblique pockets Yqsot8 more
6

automatic combinedfolder Horizon AFC 566 FKT

Dabergotz, GermanyGermany dealership location
6679 km
2010
reconditioned (used)
The Horizon Cross Folder AFC-566 FKT built 9-2010 new rollers 2016 is a high performance, space efficient fully-automated cross-knife folding machine. Featuring advanced automation with 15 seconds setup time, intuitive/user friendly operation, i2i Network flow system, and 17 programmed fold patterns. The fully automated setup including the suction head, table guide, buckle stopper, cross-knife fold section and side lay guide for the sheet size and fold pattern are selected through the to... more
4
Fidia Folder Gluer For production of pocket wallets, sleeves, envelopes, medical files etc. Working width 76 cm 8zsrp9 Hotmelt gluesystem, 2 guns all tools (plough fold etc.) machine in good condition, will be serviced and tested. MHGraphics is Fidia specialist, we can offer installation and instruction by Fidia mechanic. 100% warranty on good function after installation by us. We have a large stock of spare parts. we can offer options, like tape applicator, crossfoldstation Dokki (for tape ... more
6

combination folder Shoei SRK 74/4 KTL

Helmstedt, GermanyGermany dealership location
6606 km
1998
used
Built in 1998 Size max 740 x 1.110 mm Equipment: M2jdb feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: • belt delivery more
3

Folder Gluer FIDIA Combi-Unica+Vetta

Krefeld, GermanyGermany dealership location
6379 km
2006
used
Size max. 76 x 100cm size min. 14cm x 24cm; Presentation folders of many kinds , Special Envelopes,CD/ DVD wallets with 1 or 2 pockets, CD/ DVD wallets with 1 to 4 reinforced compartments , Photograph Frames , Photograph pockets with two compartments ,Book covers with flaps , Flexible book covers ,Simple inline boxes and tent cards , Office files and medical case note files Yonsxqteg more
4
16 pages combined folding machine with roundpile feeder Umoeblnh more


combi folder
daily

New machines via email!

Stay updated!
5
working width 76 cm for production of pockets wallets, sleeves etc. Estro unit for capacity wallets with Robatech hotmeltsystem 2 nozzles Czisxxgr Optional with Fidia Vetta final fold unit (picture 5) MHGraphics is Fidia dealer, we can offer installation and instruction more
6

combination folder Shoei SRK 66/4 KL

Helmstedt, GermanyGermany dealership location
6606 km
1997
used
Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter Ek0jajjx0 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery more
4
2qzzdq 16 pages combined folder Grieser & Kunzmann GUK FA 74-6-KTL-F4 SA 6 buckles 74cms, crossfold section more
6

combination folder Shoei SRK 66/4 KL

Helmstedt, GermanyGermany dealership location
6606 km
1997
used
Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife M2jd9 • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery more
4

combined Folder Horizon AFC 544 AKT

Dabergotz, GermanyGermany dealership location
6679 km
2002
used
combined Folder HORIZON AFC 544 AKT YEAR 2002 all belts and Rollers rebuilt, delivery Time approx 20 days TOUCH SCREEN MONITOR Szcauz88v Max.Size 75 x 53 cm (29 x 20 inch) 4 automatic Buckles & Fold Knife & 2 Buckles Below Knife belt delivery more
2
Ba2jjv2p7p continius combined folder Stahfolder KH 78-4-KTL-RFH 82 built 2005 more
6
Gremser Flatpile feeder 6 Buckles 72 cm with scoringroller in the first station Ypelek and knife, buckle, knife in the second station and stream delivery Gate fold unit more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Jdox78g9 HOMAG KFL Combination Machine Line with Panel Turner and Off [...] of:(1) HOMAG DOUBLE SIDED COMBINATION MACHINE &#9679 1 Meter on center dogs. &#9679 Vertical Spindle Leading Edge Protection &#9679 Top And Bottom Hogging / Trimming &#9679 2 Motor Premilling &#9679 12 Coil Magazine &#9679 Pre Melter / Glue Pot &#9679 (1) Main Pressure Roller & 6 Aux Rollers &#9679 End Trimming &#9679 Top And Bottom Rough Milling &#9679 Top And Bottom Multi... more
3

Box & Pan Folders Schroder BP4 3000mm x 3mm mechnical box and pan cnc Folder.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1998
ready for operation (used)
Serial No. 220058 Capacity 3020 mm x 3 mm Control Provit 2500 Top beam rise & fall 200 mm Bottom beam adjustment 50 mm Angle of bend 0 - 135 degrees Back gauge range 1500 mm Hjl8zxbak Input 415/3/50 Fitted with full length staight top tool and full length "goats foot" interchangeable bending fingers. Length 14' 2" Width 7' 10" Height 7 ' 2" more
15

envelope inserter folder inserting KERN 2500

Heemskerk, NetherlandsNetherlands
6203 km
2007
ready for operation (used)
Machine is offered for a very reasonable price! We have a KERN 2500 envelope inserter available: Bcsuenowln Year 2007 - model K2500 1x Kern 2-channel envelope inserting system with OMR and 2D reading 4 insert stations and conveyor belt Envelope inserter: 2x Kern unwinder model K100 2x Kern cutters model K980 2x Kern gathering sections 4x Kern insert stations model ZSL 1x Kern inserting module model KV250 1x Kern vertical conveyor model vru Maximum speed 12.000 envelopes per... more
ENGEL VICTORY 500H-200L-110 Combi warehouse no.: 502590 manufacturer: ENGEL Typ: VICTORY 500H-200L-110 Combi Controller Unit: EC 100 year of construction: 2002 Injection unit: 200 L, D = 30 mm, 99 ccm, 1450 bar Bgbhv9nu technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 1100 kN size of mould plates h: 740 mm size of mould plates v: 680 mm min. mould height: 500 mm max. open d... more
5
Combined the head module Blitzductor, single module PROFIBUS DP, PROFIBUS single modules for PLC, lamp socket Fqzadcz -3 x 919670 -3 x 919562 -6 x 919506 Complete price weight 0.5 kg more
8
Features and Benefits: Gearbox control lever Fence adjusting handwheel Fence locking handwheel Fh3z9k2 Fence canting lever Front cutterblock guard Planing table locking lever Planing table rise & fall handwheel Technical Specifications: Planing and thicknessing capacity : 18" wide x 9" deep / 460mm x 230mm Standard rates of power for 2 speed gear box : 20ft, 40ft per min / 6 and 12m per min Maximum depth of rebate : 1/2" / 13mm Rise and fall of surfacing tables : 1/2" / 13mm L... more
1

TURRET COMBINATION WHITNEY 3700

North Carolina, United StatesUnited States dealership location
518 km
1995
used
Elect./Voltage: Bbvrjjnpua WHITNEY 3700 CNC Punch/Plasma -- Tonnage capacity 40 ton. -- Punch diameter 5". -- Table working surface 60" x 120". -- Work piece weight capacity 1000 lbs. -- X axis travel 120". -- Y axis travel 63". -- Material thickness capacity, punching .625". -- Material thickness capacity, plasma cut .750". -- Hits per minute 1" centers 180 HPM. -- Axis travel speed, maximum 2000 IPM. -- Weight, approximately 65000 lbs. Equipped with: -- Fanuc series O-OP CNC ... more
2
round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm notching: l + T material 55 x 6 mm cutting capacity of the vertical shear 350 kN Punching capacity 190 kN shear: flat material 100 x 11 mm Svj3bme shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 1,0 x 0,5 x 1,5 m - with notching device - Accessories: length stop, material support more
1
Stamping and spiral binding machine Renz COMBI E For plastic comb Fzzaq3x A4 more
5
OVERVIEW: Brand: Trumpf Model: Trumatic 2020R Application type: Punching Machine type: Laser Punch Combination Machine Availability: Immediately Construction year: 2003 Production hours: 36568 Hvmlsf9 Location: Lithuania Origin country: Germany GENERAL DATA: Measurements width: 6448 mm Measurements depth: 7440 mm Measurements height: 2600 mm Machine weight: 15000 kg MAIN DRIVE: Punching force: 180 kN Max. sheet thickness: 6.4 mm CONTROL UNIT: Brand: Trumpf Model: Bosch... more
5
Frequency inverters, frequency converters, drive inverter, controller variable speed drive Performance 7.5 kw 380/415V 50/60 Hz input Qlwgx0qth Output 11,0KVA 380/415V 16,5Amax 7.5 KWmax 50/60 Hz Weight 10 kg more
5
round continuous feeder RI-52 1. station 4 fold pockets 1.BUH-52 2. station 4 fold pockets 2.BUH-52 Lczjzo2p stream delivery SAF-56 noise reduction hood more
1
Elect./Voltage: Dyg00qd TRUMPF Trumatic 600L Combination Press Laser -- Maximum punching capacity 27 tons -- Maximum sheet thickness 5/16" -- Type Hydraulic -- Laser Trumpf TLC2400 -- Capacity 2400 Watts -- X-Axis travel 120" -- Y-Axis travel 65" -- Punch diameter 3" max. -- Linear table speed 4300 IPM -- 300 SPM (1" centers) -- 600 SPM (contours) -- Tool rotation .01 degree 360degrees/sec. -- Position accuracy +/- 0.00393" -- Repeatability +/- 0.00118 -- Work piece weight 50... more
6

folder Horizon PF-P 330

Germering b. München, GermanyGermany dealership location
6837 km
2005
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics offer consists of: Horizon PF-P330 2-buckles cross folder - roller adjustment: fully automatic - model: flat pile feeder with air-suction - type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold - sheet size: Lyu9b max. 310x432mm; min. 125x130mm - paper weight: 50-190g/sqm - pile height: 50mm - speed: max. 240 sheets/min. - power: 230V/50Hz - 0,6kW - dimensions: 1.060x553x670mm - weight: 45kg more
1
Stamping and spiral binding machine Renz COMBI E For plastic comb A4 Nfgev more
5

Hobel-combination saw Kupfermühle DK14 // 760mm

Oosterparallelweg 41, 7951DD Staphorst, NLNetherlands
6293 km
1972
ready for operation (used)
Hochleistungskobination universal planing machine with much saws model DK 14, system copper mill Raimann 8zzx89 -Planing width 760 mm -Planing height 200 mm -Cutting width 600 mm - cutting height 50 mm -With laser -Feed rate in 6 levels, 6/9/12/15/18/30 m / min. -Operating voltage: 220v, 50 Hz 3 Ph. -Lower knife shaft 10 HP -Upper knife shaft 15HP -Feed, pole shift bar 5/6 HP -Table hub 2 PS -60 HP saw motor -Pilot Ritz unit 4 PS Machine with lots of accessories and vacuum ... more
5
Shear profile shears, punch, punching machine, hole punch Pressure power 50 to Punching ø 25 mm 16 mm snips circular steel 42 mm square steel 38 mm cutting blade length 250 mm cutting capacity 13 mm-ausklinken sheets up to 12 mm-elektrischer stop Hibvw9z8o Dimensions 1800/800/H1900 mm Weight 2500 kg more
6
CNC Portal plasma cutting machine Manufacturer: ESAB Type: Pre-cutter DX 3000 Year of constr.: 2015 Governance: Vision T5 Track width: 3,000 mm Career length: 6 m Working range: 2.5 x 4 m Vacuum table 1 plasma burner with power source m3 202 Cutting thickness: Pierce: 38 mm Cutting: 45 mm Laser pointer Ex filter system protected for Aluschneiden cutting software: Columbus . Nchvh more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bcpygkxcw7 Warner Swasey Wiedematic W4560 Combination CNC Turret/Plasma Cutter -- Capacity 45 tons -- Punching capacity 6" -- Throat depth 62" -- Table size 62" x 72" -- Table travel with one repositioning 144" -- Table traverse 1500 IPM -- Turret traverse 20 RPM -- Max. sheet weight 455 lbs. -- Max. sheet thickness 3/8" -- Hit rate up to 175 HPM -- Ram stroke 1.136" -- Crank shaft speed 350/700 RPM -- Number of turret stations 36 -- Tooling ... more
9
Type: KF 700 S circular saw with scoring unit / milling cutter swivel Year of construction: 2005 Cutting width: 800 mm digital Outrigger table (size): 1500 mm, Table: with degree grid index,. Formatschiebetisch: 2500 mm, An / aus on the sliding table RIP fence: With fine adjustment. Circular saw angle adjustment: Manual,. Circular saw height adjustment: Manual,. Saw swiveling: 90-45 degrees. Milling cutter swivel: 90-45 degrees. Cutter angle adjustment: Manual,. Milling spindle heig... more
2
ALMIG Combi 22/500 - 10 bar; Made in Germany 22 kW screw compressor with 500 liter tank motor speed 3000 1-min 3aimdfel weight : 704 kg dimensions with 500 liter-receiver (l x w x h) 1900 x 780 x 1950 mm more
11

Folding machine Heidelberg Stahlfolder KD 78/4 KTL-RD-T

Nürnberg, GermanyGermany dealership location
6749 km
1999
good (used)
Heidelberg Stahlfolder KD 78/4 KTL-RD-T Year 1999 - Serial-No. 125203/99-274037 Round pile feeder 1. Folding unit 4 buckles 2. Folding unit knive - buckles - knive Delivery SBP 46 Counter Digital Instruction - Sparepart - Electric manuals anti noise hoods include compressor/pump Bcq29unxla -Available Immediately - -can be inspect- -on stock - can be test- more
5
Profile shears, punching Knives must be exchanged completely Size 1115/730 H 1570 mm Weight 430 kg more
5

Longford CF100 Greeting Card Folder

3AD, United KingdomUnited Kingdom dealership location
5845 km
1991
ready for operation (used)
We are pleased to offer: Longford CF-100 Greeting Card Folder. Year: 1991. Serial Number: 2755. Scoring, plough folding machine With return conveyor Single fold high-speed card folder: Feeds Cut-scores Folds Minimum product size: 4 inches x 4 inches Nfdal Maximum product size: 14 inches x 10 inches Speeds: up to 60,000 cards per hour Good condition. Full and Complete. Available Immediately. more
6
5 - times combined machine FELDER BF6/31 used, functional, good condition Jointer thickness planer sliding table saw spindle moulder slot mortising machine equipment table extension plate from cast iron 3 pieces additional planer knives planning width 310 mm surface table length 1350 mm swiveling rip fence thickness height 4 – 220 mm motoric feeder 6,5 m/min H8khhzv circular table saw pivoted 90 – 45 ° saw blade max. 315 mm cutting width with rip fence 85... more
7
Combined fields conditioner thickness Planers Dressing unit: Depth of cut of 5 mm Dressing planing width 410 mm Length 2.000 mm dressing table Dressing stroke adjustable up to 45 degrees Fence 150 x 1,150 mm I9nbetu with saw wave protection front saw waves outlining protection rear Fixed width unit: Planing width of max. 404 mm Length 540 mm fixed width table Passage level min/max 4 / 250 mm Feed 12 m / min. Electric adjustment Digital display power drive 4 cutter Extrac... more
4

Box & Pan Folders ROLSAN 50" x 16g / 1270mm x 1.2mm Manual Box & Pan Folder

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Capacity 50" x 16g /1270mm x 1.2mm Top beam rise & fall 3" / 76mm Maximum length of bend 50" / 1270mm Ehdxsjv Maximum material thickness 16g / 1.2mm Fitted with 2 x Counterbalance Weights and 45" / 1143mm Interchangeable Bending Fingers. Length 6' 6" / 1981mm Width 2' 6" / 762mm Height 4' / 1219mm Nett weight actual. 900 Kgs (0.89 Tons) more
1

Section Shear - Combined SAHINLER HKM 115

Ennepetal, GermanyGermany dealership location
6422 km
2015
used
round bar steel 55 mm square edge steel 50 mm L-beam 150 x 150 x 16 mm hole punhing press: pressure 115 t hole punching press: capacity (dia. x thick.) 34 x 26 mm notching: width x thickness 60 x 13 mm flat steel 380 x 25 mm total power requirement 11 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 2 x 1 x 2,1 m S0oohcs2x more
5
Shear profile shears, punch, punching machine, hole punch To force 60 Punching throat depth 370 mm Snips cutting -ausklinken -mechanical triggering B3ar0szm -div. stamps and dies Dimensions 1600/1100/H2300 mm Weight 1860 kg more
2
Tool combination LEITZ, comprising: 2 x chamfer cutters + Fügefräser 60 mm + folding cutter + sleeve 50 mm, number: 2, price per piece: €190,00 + VAT Bcpw0hjccj more
6
Sander Brand: Vangroenweghe Model: F 1060 -combi II Year: 1988 Voltage: 220 V three-phase Engine power: 17 kW Sanding capacity: 106 cm x 21 cm State: in working condition Suction pipes are not part of the lot Note: There is no material handling or loading available on site, the door openings and access do not allow the entry of truck with crane inside the building, on the other hand access to made laterally to a dwelling and there is no parking available in front of the workshop. Dismantling f... more


combi folder
daily

New machines via email!

Stay updated!

to

to

Edit search
COMBI FOLDER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close