Used Compact Excavator for sale (5,352)

Condition: used, Year of construction: 2014, operating hours: 10,000 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating Hours: 10,030 h Weight: 26,300 kg Engine Manufacturer: Liebherr (short-tail) Engine Power: 120 kW Gbjdpjwzq Iusfx Ag Tjg Air Conditioning Engine Type: D934S * Sales Consultant Information * + * APPOINTMENT REQUIRED FOR TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. * Input errors cannot be ruled out. * Please verify the equipment on site + input errors + subject to prior sale.

Condition: used, Year of construction: 2017, operating hours: 9,979 h, Liebherr A914 Compact mobile excavator from year 2017 with only 9,979 operating hours! ----* Manufacturer: Liebherr * Model: A914 Compact * Year of manufacture: 2017 * Recorded operating hours: approx. 9,979 * Including Oil Quick OQ65 SH quick coupler * German machine, first-hand * Including 1 x digging bucket Gbjdpfx Agex Dpyxj Teg * CE declaration + operating permit available * Good condition * ZSA * More photos and video on request * Price: €59,900, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details without guarantee or warranty, errors and prior sale excepted.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 276 h, machine/vehicle number: SY008HCD117108, Equipment: UVV, air conditioning, all wheel drive, cabin, rubber tracks, Year of manufacture: 2023 Engine power: 73 HP (53.7 kW) Operating hours: 276 h Operating weight approx. 8,800 kg Engine: Yanmar, Stage V, approx. 73 HP, 202 Nm, 3,319 cc Hydraulics: Load Sensing, max. 185 l/min 1st proportional auxiliary circuit (grab/hammer) on joystick 1 2nd proportional auxiliary circuit (grapple) on joystick 2 Safety lifting valves for dipper arm and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the arm Bucket breakout force ISO: 56 kN Dipper arm tear-out force ISO: 38 kN Operator cab: ROPS Adjustable boom, dipper arm 2,050 mm Dozer blade Rubber tracks 450 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch 2x LED work lights on cab roof 1x LED work light on boom 12V socket Document compartment Radio with loudspeaker Gedsxltt Sepfx Ag Tobg Including quick coupler

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 3,500 kg, empty load weight: 32,000 kg, operation weight: 3,210 kg, chain condition: 100 %, number of seats: 1, first registration: 09/2024, emission class: euro5, Year of construction: 2024, operating hours: 2 h, machine/vehicle number: B33, Equipment: additional headlights, adjustable boom, adjustable chassis, cabin, hammer hydraulics, rubber tracks, standard shovel, Our latest excavator the H&R B 33 The new version has a double-sided swivel arm and a transport weight of 3200 kg. It has a transport weight of 3200 kg, is 4.95 m long 0.98 / 1.5 m wide and 2.54 m high and has 2 travel speeds of approx. 4.5 km/h. The bucket is 0.4 m wide and has a capacity of 0.095 cbm and is equipped with a quick coupler. The Kubota D1505 engine has 18.5 KW and complies with the latest E-5 emission standard The excavator is also CE approved Optionally there is an auger and a demolition hammer or an adjustable humus bucket in different widths from 0.80m to 1.2m wide Gjdpoulyglofx Ag Tebg Spare parts are available from us. 2 years warranty and 1 year guarantee are of course included. Spare parts supply and service is guaranteed by us Financing with terms of 48-84 months is also possible. 28485,- net 5412,15 19 % 33897,15,-€ gross

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: SY008CE0693K8, Year of manufacture: 2024 Engine power: 73 hp (53.7 kW) Godpfx Asv Nix Aog Tsbg Operating weight approx. 8,800 kg Yanmar engine, Stage V, approx. 73 hp, 202 Nm, 3,319 cc Load sensing hydraulics, max. 185 l/min 1st proportional auxiliary control circuit for GRL/hammer on joystick 1 2nd proportional auxiliary control circuit for grapple on joystick 2 Safety lift valves for stick and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the boom Bucket breakout force ISO 56 kN Stick tear-out force ISO 38 kN ROPS cab Adjustable boom, dipper stick 2,050 mm Dozer blade Rubber tracks 450 mm Battery main switch Travel alarm and Rotating beacon Emergency engine stop switch 2 LED headlights on the roof 1 LED headlight on the boom 12V connection Document compartment Radio with speaker

Condition: excellent (used), CATALOG NUMBER 7612 Technical specifications: - Max. workpiece width: 1030 mm - Max. workpiece height: 150 mm From above: - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + pad + metal roller) - Smooth rubber idler roller From below: - Infeed roller - Feed belt - Outfeed idler roller - Pneumatically oscillating belts with photocells - Electric table height adjustment - 2 feed rates - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Extraction port diameter: 150 mm - Dimensions (L/W/H): 1500 x 1750 x 2000 mm - Weight: 965 kg Gsdpfx Aev Ubmijg Tobg ADVANTAGES - German made - Original paint - Used sander in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change if there are significant exchange rate fluctuations)

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment Gjdpextfqxjfx Ag Tobg • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Gjdpfx Agjpxnpae Tobg Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: good (used), Nagel Foldnak Compact Booklet Maker with Trimmer The machine is in working order and ready for production. Very good condition. The machine stitches at two points and folds in half to create a finished booklet, while the final knife trims the front of the booklet. Description: – Regular stitching and optional loop stitching (standard staples, economical to operate) – Adjustable heads Godpfx Ajx N I Hdsg Tebg – Option to disable stitching or folding (allowing for sewing only, for example) – Push-button or photocell triggering – Copy counter – Side and front alignment – Staple indicator light – SRA3 format – 230V power supply Supports non-standard formats.

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Gederfcpmepfx Ag Tsbg Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2003, We currently have 6 units of the Weland Compact Lift 2440x820 available for sale in excellent condition. These vertical lift modules are from 2003 and have been regularly serviced by the manufacturer. All machines are fully operational. The machines are offered in packages of 3 units at a very competitive price. They are ideal for anyone seeking efficient storage solutions without the high cost of new equipment. Each tray measures 2,445 mm in width and 820 mm in depth, providing a surface area of 2 m² per tray. With approximately 40 trays per machine, each unit offers a total storage area of 80 m², while occupying just 8.7 m² of floor space. The units have a height of 8,000 mm but can be reduced during installation if required. Gsdpfox Afcgex Ag Tjbg The machines are ready for prompt delivery and installation. Technical information: Manufacturer: Weland Solutions Year of manufacture: 2003 Model: Weland Compact Lift 2440 Height: 8,000 mm, flexible Width vertical lift module / tray: 2,917 mm / 2,445 mm Depth vertical lift module / tray: 2,998 mm / 820 mm Number of trays: Approx. 40 per module Maximum load per tray: 300 kg Electrical requirements: 400 V, 20 A

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW year 2017 price: 4.950 € contact: Mr. Rainer Eckerle Gbsdpfjrupr Djx Ag Tog

Condition: new, functionality: fully functional, 8X4 (2.4 X 1.2M) DOUBLE DECK SCREEN 2.2KW DRIVE MOTOR WEIGHT 1800KG LENGTH 5000MM Gsdpfx Agsin E Hqo Tjbg WIDTH 2000MM HEIGHT 2300MM 4.5M FINES CONVEYOR 3KW GEARBOX DRIVE GASOLINE 8.5KW ONBOARD GENERATOR AGRI OR ROAD LEGAL WHEELS Worldwide delivery available, dealer enquiries welcome,

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting Gjdpfx Agjflz Hdo Tebg English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: good (used), Emco Compact 10 Lathe Made in Austria. The machine is in perfect condition, practically unused. The machine comes from a maintenance workshop at a printing house. It has not been used in production. Godpjx Ncucofx Ag Tjbg Accessories are included.

Condition: good (used), Cool Compact loading station 2-door loading station with GN containers mobile on wheels granite top Gbedelkbccjpfx Ag Teg Dimensions WxDxH 107 x 70 x 113 cm Slip stations - new and used - you will find in our store! International shipping costs on request!

Condition: used, functionality: fully functional, This type of filling machine is designed for the dosing of sauces and other products in the food field, in particular liquid and pasty products that hold in solution pieces of particularly delicate solid products, e.g.: tomato sauce, Bolognese sauce, vegetable puree, béchamel jam, fruit purees, etc. MACHINE COMPOSED OF: - HIGHLIGHTER - ISHIDA MULTIHEAD WEIGHER - VSB/L-4 4 PISTON AUTOMATIC FILLING MACHINE - MONDINI COMPACT EVOLUZIONE E 380 THERMO SEALER AVAILABLE FOR DIFFERENT FORMATS: Gbodswny Rxspfx Ag Tog - Round: 99 mm diameter. - Rectangular: 162 x 122 mm. - Rectangular: 255 x 150 mm.

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Gedpfx Agewahhve Tsbg ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: used, Year of construction: 2018, Striebig Compact Wall Saw – 2018 Model – Excellent Condition A rare opportunity to purchase a Striebig Compact Wall Saw, built in 2018 and meticulously maintained. Known for Swiss precision and robust build quality, this machine is perfect for accurate vertical and horizontal panel cutting in tight workshop spaces. Key Details: Make/Model: Striebig Compact Year: 2018 Condition: Excellent – clean, reliable, and serviced Gbsdpfxsx Dh T Dj Ag Tsg Cutting Capacity: Ideal for full-sized sheet materials (MDF, plywood, laminates, etc.) Usage: Light-to-moderate – not heavily used Location: N18 Availability: Ready for collection from North London Features: Smooth, accurate vertical and horizontal cuts Space-saving design – ideal for smaller workshops Heavy-duty frame and guide rails Dust extraction port compatible Striebig is the gold standard in vertical panel saws, offering durability, safety, and unmatched precision.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, cutting width (max.): 16 mm, type of input current: three-phase, total length: 730 mm, total width: 600 mm, total height: 1,200 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, year of last overhaul: 2025, space requirement height: 1,200 mm, space requirement length: 730 mm, space requirement width: 600 mm, Bread Slicer MHS Compact Circular blade machine, mobile Blade newly sharpened and coated Manual operation via membrane keypad Simple, robust technology Dimensions: 600 x 730 x 1200 mm (W x D x H) Only with us: DGUV V3 tested Connection: 400V, 16A CEE plug Used machine, cleaned With warranty and spare parts service Gedpfx Agox Nutdo Tobg Quality from a specialized workshop! Benefit from over 35 years of experience! Options: Spare blade Maintenance contract Delivery service Service package Spare parts box Instruction & commissioning

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: syntec, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 350 mm, total height: 2,200 mm, total length: 4,200 mm, total width: 2,100 mm, table load: 1,500 kg, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 2,800 kg, spindle mount: MK 3, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Cost savings for the end customer: €80,000 instead of €40,000 DMA delivers high-quality CNC machines at unbeatable prices by eliminating expensive service contracts and installation visits. Ideal for professionals who want to maintain full control. Included in the purchase price: - CNC controller "SYNTEC" - CNC nesting/milling CAD/CAM - PEGASUS Professional CAD/CAM including online training/helpdesk - Starter kit with cutting and drilling tools for CNC sheet metal processing • Spare parts supply: In the event of a defect within 12 months, after diagnosis (photo/video), spare parts will be supplied free of charge. • Labor costs not included: You can replace the part yourself or commission an external service provider. • Low-maintenance designs. • Digital commissioning: Via app or TeamViewer, direct online service. This means technician visits can be avoided, saving both time and costs. Gbedpsx Rz Auefx Ag Tog • 24/7 online support. Digital support as an alternative • Video tutorials: Clips for calibration or parts replacement. • Exploded diagrams: Components immediately identifiable. Functionality in focus: Your machine, your management, our best price. Usable working area: 3,200 x 1,600 mm (standard sizes available). Z-axis: 200 mm. Automatic tool changer with 9 kW router spindle. Up to 26 spindle positions. Row drilling unit optional. Grooving unit optional. CadCam nesting software. Pressure rollers (for uneven materials) optional. Becker VTLF2.250 vacuum pump. All axes servo-driven. Heavy-duty CNC milling machine Type "NESTING" Working area: 1,300 x 2,600 mm (standard sizes available) Z-axis: 200 mm ATC 9 kW router spindle Drilling unit optional Grooving unit optional CadCam nesting software Pressure rollers (for uneven materials) optional Becker VTLF2.250 vacuum pump All axes servo-driven

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,819 h, load capacity: 2,500 kg, lifting height: 4,090 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,610 mm, motor manufacturer: Volkswagen, fork length: 800 mm, tire condition: 100 %, overall weight: 4,900 kg, empty load weight: 4,900 kg, total height: 2,610 mm, total length: 1,900 mm, total width: 1,930 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Only 4819 hours!!!! We sell forklifts after a full service. Prepared for the end user. Ready to use. Godex S R Ehspfx Ag Tobg We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, cutting width (max.): 25 mm, type of input current: three-phase, total length: 730 mm, total width: 600 mm, total height: 1,200 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, cutting height (max.): 300 mm, space requirement height: 1,200 mm, space requirement length: 730 mm, space requirement width: 600 mm, Bread Slicing Machine MHS Compact Mobile circular blade slicer Gbodpfxoxyqu As Ag Teg Blade newly sharpened and coated Manual operation via membrane keypad Simple, robust design Dimensions: 600 x 730 x 1200 mm (W x D x H) DGUV V3 tested exclusively with us Connection: 400V, 16A CEE plug Used machine, cleaned With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Spare blade Maintenance contract Delivery service Service package E-box Instruction & commissioning Many more top bread slicing machines in stock!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,819 h, load capacity: 2,500 kg, lifting height: 4,090 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,610 mm, motor manufacturer: Volkswagen, fork length: 800 mm, tire condition: 100 %, overall weight: 4,900 kg, empty load weight: 4,900 kg, total height: 2,610 mm, total length: 1,900 mm, total width: 1,930 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Only 4819 hours!!!! We sell forklifts after a full service. Prepared for the end user. Ready to use. Gbjdpfex Rc H Uex Ag Tog We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, type of input current: three-phase, total length: 730 mm, total width: 600 mm, total height: 1,200 mm, control voltage: 24 V, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, year of last overhaul: 2025, space requirement height: 1,200 mm, space requirement length: 730 mm, space requirement width: 600 mm, Bread Slicer MHS Compact Mobile circular blade machine Blade newly sharpened and coated Feed length 380 mm, feed depth 280 mm Manual operation via membrane keypad Simple, robust engineering Dimensions: 600 x 730 x 1200 mm (W x D x H) Exclusively DGUV V3 safety-tested by us Connection: 400V, 16A CEE plug Pre-owned machine, cleaned With warranty and spare parts service Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Replacement blade Godpfx Agoxwyu Te Tjbg Maintenance contract Delivery service Service package E-Box Training & commissioning We have many top bread slicers in stock!