Used Computer Cabinet for sale (6,742)

Condition: used, Year of construction: 2016, Fatting cabinet WP Riehle Line 2000 A, size 36 Year of manufacture: 2016 Condition: cleaned & inspected Fermentation chamber with integrated 2-liter water tank Dcjdpfjz A Srfex Acpjn Includes fermentation trolley with 10 tilting trays Reversing basket and tilting trays, 6 rows Internal dimensions of the trays (W x D x H): approx. 67 x 73 x 11 cm Filling capacity: 34 liters / 31 kg Heating: 6 kW Benefits: Airtight WP RIEHLE volume lid for larger dough volumes with the same initial weight Longer fat life due to pulsed heating Lowest energy consumption and consistent temperature due to direct heating in the oil Minimum fat absorption due to consistent temperature, even when turning Computer control with 10 baking programs for consistent quality Automatic mode provides free working time during the baking process.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H800U was manufactured in 2018. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a robust table diameter of 800 mm and a high spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H800U vertical machining centre we have for sale. Contact us for further details. Dcjdpfx Acsz Nf Uhopon - Swivel Range (B/A Axis): -120 to +120 degrees- Rotary Table (C Axis): 360 degrees continuous- Table Diameter: Kessler table 800 mm- Tool Changer Capacity: 96-fold- Measuring Systems: Heidenhain linear measuring system (X, Y, Z) with sealing air, Heidenhain rotary measuring system- Internal Coolant Supply (IKZ): 20 bar with belt filter unit and coolant temperature control- Hydraulic & Pneumatic Interfaces: 3-way hydraulic connection & 1-way air connection in table center, hydraulic unit controlled via M-function- Spindle/Axis Cooling: Regulated spindle cooler, active air-air control cabinet cooler, controlled oil cooling for 4th and 5th axis- Additional Features:POS Kinematic module with reference spherePOSkontur contour protectionPOS DCM collision moduleexternal hinged-belt chip conveyorchip flushing device Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 91 kg, total length: 45 mm, total width: 60 mm, total height: 160 mm, type of input current: three-phase, 🔧 Device Description Professional cooling unit for control cabinets, designed for industrial applications. The unit provides stable operating conditions for electronics and automation systems, protecting them from overheating. The TopTherm series model is characterized by high cooling performance and reliability during continuous operation. ⚙️ Technical Data Dcjdjyw Ndgepfx Acpsn Power supply: 400 V / 50 Hz (3~) / 460 V / 60 Hz Cooling capacity (L35 L35): 400 V: approx. 3.95 kW 460 V: approx. 4.35 kW Sensible cooling capacity: up to 3.58 kW Power consumption: up to 2.0 kW Rated current: 4.2 A / 4.6 A Refrigerant: R134a (2995 g) Operating temperature range: 10°C – 55°C Degree of protection: IP54 (internal) / IP34 (external) Weight: approx. 91 kg 📦 Delivery Pallet shipping available Personal collection also possible We assist in organizing international transport

Condition: used, Number of floors . 0 Dedpfx Ajyyczwocpocn Width of floors . mm Depth of floors . mm 770x50x1900 No locks or keys included Perhaps suitable for restoration The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity Djdpfx Ajyyxa Necpocn - L = 3000mm W = 1500mm H = 500mm - Load capacity: 5t - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift - Rotary table available as an option

Condition: excellent (used), Year of construction: 1998, Double-sided Meinert grinding machine for band saw blades. Complete with dial gauges, fully functional. Dcjdpfx Acszc Iacepen

Condition: used, For sale: a computer from a Finn-Power L6A CO2 laser system. Dodpfx Acey Tt Unopjcn Manufacturer: BECKHOFF Manufacturer's code: C6650-0050 / 000f56jh Revision: REV14 Price: 2000 EUR. If you have any further questions, please do not hesitate to ask.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 3483420_25_32, Tool cabinet for press brake Dsdpfxjy A Nvaj Acpscn -ausziehbare drawers, allowing the two-sided access to the tools -beliebige Hoehenverstellung the Einlegeboeden -robust steel construction, powder coated in any RAL palette -Lateral Gabelfuehrungsschienen for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 Pieces - Dimensions of drawer: - Total height 1200mm / 850mm Overall width / total depth 1050mm - Dimensions of the drawers in a drawer: - Fachhhoehe set at 210mm (is varriabel) - Trade Overall Height 990mm usable ohnen Zwischenboeden - Trade width 130mm available - Trade depth usable 980mm - Number of Zwischenboeden: 3 pieces

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 34834_2025_26, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) Dsdsy A Nwqjpfx Acpecn -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Dcodpfx Acsynwx Sopen Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: excellent (used), functionality: fully functional, Drawing cabinet / map cabinet, six drawers, 1,350 x 930 x 980 Dodpfx Asyxnrxjcpecn

Condition: used, Kuka PC Dcedpfjvgwxrex Acpsn KPC ed05 Computer Robot Robot Industrial robot

Condition: ready for operation (used), functionality: fully functional, This is an original ABB robot controller cabinet offered without internal wiring or electronic components. The cabinet is empty; no power modules, wiring, or controller boards are included. Dodpfx Aexc Nbmecpecn Compatible with various ABB robot controller series Condition: Used, in good physical shape.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC) Dcjdpfoud N Hdox Acpen  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit Djdjuggb Djpfx Acpjcn  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2023, condition: new, Control with motor for all old NC feeds. Substitute for Alba, Schleicher, Dreher, PA, Dsdpfxjcn Du Io Acpocn Torque 6-90 Nm Complete price from 3,900.00 for Alba stepper motors from 5,900.00 for servo drives. To be installed by any home electrician.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) Dcsdpfx Acsd Atipspsn - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Dodpfxsh Tymrj Acpecn Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.

Condition: ready for operation (used), Pilz PIPANEL WS 15 - Opel control panel, with R-Disk Windows NT, used, shows normal signs of wear, 100% functional. Dcedpfxsi Eclro Acpjn

Condition: used, Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Control panel: Operating terminal control panel including PC Command Panel Dcodpjtp Rf Eofx Acpen -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 -Individual components: see photos -Total dimensions: 550/600/H870 mm -Weight: 52 kg

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Dcsdpfx Aszvm E Aecpjn Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Dcedpfx Acoimdx Tspon Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout Djdozt Sw Sspfx Acpscn • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components • Control cabinets IP55 according to plan • Open steel rack constructions • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Condition: excellent (used), mileage: 337,227 km, first registration: 06/2020, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,350 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: beige, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Roof spoiler - High beam - Low noise - Speed limiter - Alloy wheels - Air suspension - Air horn - Particulate filter - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater (stand heating) - Toolbox - Xenon lighting = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 16,123 cc Unladen weight: 10,635 kg Transmission Gearbox: I-SHIFT, automatic Axle Configuration Suspension: Air suspension Front axle: Alloy wheels; Steering axle Rear axle 1: Twin tyres; Alloy wheels Rear axle 2: Twin tyres Condition Technical condition: Very good Visual condition: Very good VOLVO FH 16.750 6X4 WITH XXL CABIN EURO 6 L PACKAGE 750 HP DRIVELINE 6X4 WHEELBASE 335 CM FULL AIR SUSPENSION Dedpfx Acouxvduepecn FH XXL GLOBETROTTER CABIN, FULLY EQUIPPED: - Air conditioning (CLIMA) - Navigation - Refrigerator - Microwave - Coffee machine - Leather interior - TV prep - Extra wide bed - Numerous cabinets - Volvo Dynamic Steering THE XXL GLOBETROTTER CABIN IS 13 CM LONGER AND 25 CM WIDER. I-SHIFT AUTOMATED GEARBOX ADJUSTABLE FIFTH WHEEL TOOLBOX ALCOA WHEELS XENON LED FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Djdpfx Acjzuyx Hepocn Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.