Used Container Turning Device for sale (24,274)

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Kdedpfxsxuavfs Ab Uew Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" Kdedpfxjw Dvnxs Ab Uew TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2002/018, Y2002/034, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. Kdedpfjw Npfgsx Ab Uew The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Kdsdpfx Aew Iqumsb Ujw Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter Kdjdpexw Ilmsfx Ab Uow

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Kedpfxjxwy S Ee Ab Usdw Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Year of construction: 2009, condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Number of turrets 1 Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning Kjdpfx Aboxirhve Usdw

Condition: good (used), Year of construction: 2017, PoLyGim (Eurotech) Kobra 16SLY CNC Swiss Po Ly Gim Diamond 16CSBIII CNC Swiss Lathe Mfd. 2017 with Barloader Power on time: 2053 hours Cutting time hours: 1477 hours CAPACITY 16mm POWER 3 hp RPM 8,000 RPM # AXIS 7 EQUIPPED WITH 12' LNS GT 326-E Automatic Magazine Bar Loader, New 2016, S/N 15232000617 ADDITIONAL CHANNEL SET (MUST CHECK FOR COMPLETENESS) BARFEED ALIGNMENT KIT PUSHER ROTARY TIPS ALL AVAILABLE COLLETS AND WRENCHES FOR BARFEED LOW HEIGHT CHIP CONVEYOR LONG PARTS / SUB SPINDLE PASS-THRU CATCHER PARTS CONVEYOR CHIP PAN WORK LIGHT COOLANT SYSTEM PART OFF DETECTIVE SENSOR CHUCKER KIT ROTARY GUIDE BUSHING STATIONARY GUIDE BUSHING PART CATCHER MACHINE TOOLBOX ALL AVAILABLE MANUALS TOOLING: (7) DRILL CHUCKS (7) NUTS Kdjdpjwrtzlefx Ab Uow (6) BIT HOLDERS

Condition: used, machine/vehicle number: SXKBC2JG9GKAKxxxx, Year of construction: 2016, Please contact ATS Norway for more information Kedpfswpibpjx Ab Ujdw Please provide reference number upon request: 20589 Specifications: Model Year: 2016 EU Approval Valid Until: 02.01.2026 Suspension: Air suspension Tires: See photos for condition Length: 996 cm Width: 255 cm Axle Distance: 136 cm / 136 cm Curb Weight: 4,560 kg Toolbox Description:2016 Konar container trailer, equipped with air suspension and a practical toolbox. EU approved until January 2, 2026, and ready for delivery. Contact us for more information or to schedule a viewing. Technical approved: Yes EU-approved until: 05.03.2026 Own weight: 4560 Total Weight: 27000 Payload: 22440 Width: 255 Length: 956 Model: 2016 Konar Containerkjerre

Condition: used, functionality: fully functional, machine/vehicle number: T341131442, Year of construction: 2008, operating hours: 12,700 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,700 mm, empty load weight: 79,800 kg, drive type: Diesel, Full Container Reachstacker Chassis number: T341131442 Mast type: Telescopic Kdedpfx Aexybdnob Usw Transmission: Clark-Dana 15.7TE32418-20 Technical condition: good Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 20 - 40% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 20 - 40% Description: Engine heater Side shifter, Full cab,

Condition: good (used), Year of construction: 2019, operating hours: 8,834 h, load capacity: 2,000 kg, lifting height: 4,465 mm, fuel type: gas, mast type: triplex, construction height: 2,060 mm, mileage: 8,834 km, This TRIPLEX LPG forklift from the brand STILL is in good condition and comes from 2019;Capacity of 2,500 kg;Lifts to a height of 4,465 mm;Suitable for in the container;Equipped with FREELIFT and SIDESHIFT;Drive-through height is 2,060 mm;Forks 1,100 mm;8,834 hours on the counter;Video to followFINANCIAL LEASE POSSIBLE Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner* Kjdpjvvkg Ujfx Ab Usdw

Condition: good (used), Year of construction: 2004, turning length: 2,000 mm, Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Kodpfxsxvyq Es Ab Usdw Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Kdjdpfxexpytgo Ab Usw Application Types Turning

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO Ksdpfewa D Tuox Ab Uedw (DCS version) (requires 3001) contact us for more details

Condition: used, machine/vehicle number: W09ZKW32714A0xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 20587 Specifications: Model Year: 2015 EU Approved Until: 02.01.2026 Suspension: Air suspension Tires: See photos for condition Tipping Function: Yes Length: 994 cm Width: 255 cm Axle Distance: 131 cm / 131 cm Curb Weight: 5,520 kg Description:Container trailer with tipping function from 2015. EU approved until January 2, 2026, and ready for delivery. Contact us for more information or to arrange a viewing. Technical approved: Yes Kdjdpewph Eyjfx Ab Ujw EU-approved until: 02.01.2026 Own weight: 5520 Total Weight: 25000 Payload: 19480 Width: 255 Length: 994 Model: 2015 F.A.G Containerkjerre – med tipp

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Kdjdpfx Abjxybdho Uow Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning length: 1,090 mm, spindle speed (min.): 4,500 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 1,090 mm, spindle nose: A 2-6, CNC Turning Milling Centre with 2nd spindle and lower turret Control Fanuc 31i Model A Turning diameter 170 / 245 mm Turning length 1090 mm Kjdpfxsxxlplo Ab Ujdw Spindle bore diameter 71 / 51 mm Spindle nose A 2-6 Spindle nose sub spindle A 2-5 Turning speed 4.500 R/min Turning speed sub spindle 6.000 R/min Milling head speed 12.000 R/min Movement X-axis 455 mm Movement Y-axis +70/-70 mm Movement Z-axis 1090 mm B-Axis travel 230° C-Axis indexing 0,001° Tool Taper Capto C6 Tools in tool magazine 40 Bar feeder: LNS Alpha SL65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 34 h, load capacity: 8,000 kg, lifting height: 3,440 mm, free lift: 1,170 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork carriage width: 2,120 mm, fork length: 2,400 mm, empty load weight: 12,500 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,130 mm, Diesel Forklift Load center of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tires type: Superelastic Front tires size: 8.25-15 non-marking Rear tires type: Superelastic Rear tires size: 8.25-15 non-marking Description: In addition to this Clark model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, would be happy to advise you in detail about this C80D. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Sideshift, fork positioner, Kdjdpev Ihkhjfx Ab Usw Heating, full cab, full free lift, DPF

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Kodpfx Aexpyqxjb Uodw Main Drive Number of spindles 2 Tool taper IMS 76 Number of axis 3 Tail Stock Pinol tool taper VID 30 Tools Number of station 2x16 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Kdodpfx Abjv S H Uye Usw Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: used, Year of construction: 1995, color: grey, VAT/margin: VAT qualifying Quantity available : 5 units Volume: 200 L Material : Stainless steel Year : 1995 Reference : CC200l Total top opening Kdjdpfx Abjxxmrhj Uew Diaphragm valve: Ø 20 cm Dimensions : 85 x 125 x 70

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 400 mm This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Turning Kdsdpfx Aoxya Apeb Usw

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, Kjdpsu T Shvjfx Ab Uedw (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: used, loading space volume: 5 m³, VAT/margin: VAT qualifying Containers for powder and capsules. Total volume: 500 litres Useful volume: 300 litres according to manufacturer’s plate Quantity : 12 Polished stainless steel 316 Kdodpoxxmq Rjfx Ab Usw Pyramidal bottom Total opening Lid Drainage trapdoor 150 x 150 Overall dimensions 750 x 750 x 1350

Condition: used, loading space volume: 2 m³, Empty weight: 255 kg Dimensions (LxBxH): 100 x 120 x 185 cm VAT/margin: VAT qualifying -Parallepipedic stainless steel 1,544 liters Tare 255 kg / pressure test 0.65 bar Palletizable and stackable Kdodpfoxxmqkex Ab Ujw Top trapdoor diameter 450 mm hermetic Drain d.50 Approved for transport Dimensions: 1000 x 1200 x ht 1850 Weight: 2950 kg