Used Corner Cutting Machine for sale (86,008)

Condition: ready for operation (used), Year of construction: 2019, Movement X-Axis Movement 3070 mm Y-Axis Movement 1550 mm Table Table load 920 kg Max Material Thickness Steel 25 mm Stainless steel 25 mm Aluminium 25 mm This AMADA ENSIS-3015 AJ was manufactured in 2019. A fiber laser cutting machine, it represents a reliable option for precise cutting tasks. Consider the opportunity to buy this AMADA ENSIS-3015 AJ fiber laser cutting machine. Contact us for more information. Kjdpjx D Hu Tsfx Agzofa Application Types Cutting

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2019) – Complete and overhauled waterjet cutting machine Now you have the chance to acquire a MAXIEM 2040 model year 2019, in very good condition – freshly serviced, overhauled, repainted and ready for production. Kjdswn El Uspfx Agzsfa The machine is equipped with: A-Jet (5-axis cutting head) – for beveling, angle cutting and cone compensation Rapid Water Level Control – Raise and lower water level Premium software – includes lifetime free updates and unlimited licenses Pump: 40Hp Pump time: approx. 3500 hours This is a reliable, well-maintained machine with large capacity (cutting area approx. 4 x 2 meters), perfect for those looking for high precision, flexibility and production safety. Delivery and installation can be discussed if necessary. The machine is available for viewing – please contact us for more information or booking.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Muller Martini Three-knife trimmer Merit-S year of construction 2001 - basic machine Kedpfxjt Iff Sj Agzefa - in feed - magazine - pressing device - cutting device - delivery - 2 sets of knives - technical documentation

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Kodpfx Aox Hzm Segzjfa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Kfodpfxjx A Hagj Agzsa Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: Sinar series DC K 2.5kW Laser source, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 4,500mm Condition: Very Good Hours: 22,500hrs Available February or March 2026 This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=6500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Ksdpfx Agex Ddagezofa Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2019, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Kfjdex D Rxpepfx Agzja Application Types Cutting

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 8100332, repeat accuracy: 0.076 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 25 mm, workpiece weight (max.): 245 kg, type of input current: AC, input voltage: 230 V, pressure: 2,000 bar, Do you need a precise and versatile cutting machine that doesn't take up an entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial quality with a compact format - perfect for workshops, schools, product development, prototyping and small series production. With water and abrasive, you can cut almost any material - from aluminum, stainless steel and titanium to carbon fiber, plastic, glass and stone. All with high precision, without heat effects or deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar Kedpfx Agjwl Ipkozofa 🔹 Power: 230 V, 1-phase (standard socket!) 🔹 Ready to run - plug & play ProtoMAX comes complete with IntelliMAX software, where you can draw, import and cut directly from the same interface. Easy to use, powerful enough for advanced jobs. Do you want to show that your workshop is serious - even on a small area? Then OMAX ProtoMAX is an obvious choice.

Condition: good (used), functionality: fully functional, Year of construction: 2015, laser power: 4,400 W, Equipment: documentation/manual, CNC Laser Cutting System Bystronic ByAutonom 3015 4400 Watt with BytransCross/BytransLine Automation Max. X working area: 3000 mm Max. Y working area: 1500 mm Max. Z working area: 80 mm Control: ByVision Laser power: 4,400 watts Maximum sheet thickness, steel: 25 mm Maximum sheet thickness, stainless steel: 20 mm Maximum sheet thickness, aluminium: 12 mm 1 Base Machine 1.1 ByAutonom 3015; ByLaser 4400 1.2 Automatic shuttle table system with 2 shuttle tables 1.3 Integrated control cabinet 1.4 ByVision 1.5 Operator comfort options 1.6 Touchscreen with ByVision user interface 1.7 Condition Messenger Kodpfxjx Aq S He Agzefa 1.8 Maintenance Messenger 1.9 Restart Manager 1.10 System Manager 1.11 ByHand (manual guidance function) 1.12 Cutting Parameter Assistant 1.13 Uninterruptible Power Supply (UPS) 1.14 Laser plasma cutting of thick materials 1.15 Cutting bridge 1.16 Cutting head with 5" and 7.5" lens cassettes 1.17 Collision detection 1.18 Automatic nozzle centring 1.19 Regulated pulsed piercing 1.20 Bypos CO₂ 1.21 Cut Control 1.22 Lens protection 1.23 Nozzle cleaning 1.24 Scanning function 1.25 ByLaser 4400 laser 1.26 Magnetically mounted compressor 1.27 Power Saving Mode 1.28 Output coupler protection 1.29 Interface for automation/handling 1.30 ByLaser 4400 chiller 1.31 Laser gas premix 1.32 Operator safety in cutting area 1.33 Operator safety in loading/unloading area 1.34 Voltage 400V / 50Hz 1.35 Electrical connection (machine, incl. laser source) 1.36 Electrical connection for laser source dehumidifier 1.37 Compressed air supply (machine incl. laser source and chiller) 1.38 Material specification 1.39 Part tolerances and cut surface quality 1.40 Assist gas supply and gas quality 1.41 Ambient conditions 1.42 Structural requirements 1.43 System documentation 2 Accessories for the machine 2.1 Laser source position 270° 2.2 Enclosed housing/roof 2.3 Parts and cross conveyor in cutting area 2.4 Dust extraction unit with drum adapter: 3000 (200 l/55 gal drum) 3 Value Packages 3.1 Kit with lens cassette and nozzle changer 3.1.1 Automatic nozzle changer (kit) 3.1.2 Automatic lens cassette changer (kit) 4 BytransCross/BytransLine 4.1 BytransCross 3015 includes: - 2 manually movable sheet metal tables - Sheet separation with double sheet detection 4.2 Surcharge for electrically driven sheet metal table

Condition: used, Year of construction: 2011, Programmable photocells Kjdpfox Hxvdox Agzjfa

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 84,004 h, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Equipment: safety light barrier, Working range: X = 3000 mm / Y = 1300 mm / Z = 600 mm B = +/- 135° C = n x 360° Standard configuration: - Fixed pendant control panel Kfsdpfx Asrb Dg Negzja - Teach panel - Teach software - TruDisk 3001 solid-state laser - Air cooler Cooling and pilot laser (switch) - LLK with 30 m - Prepared for laser cutting - Cutting gas: nitrogen - Dynamic cutting optics with f = 150 mm - Magnetic coupling - FocusLine - Control: Siemens Sinumerik 840 D (open control on PC basis) - Network card Special configuration: - MDE interface - FastLine Cell - ObserveLine - Rotation changer D = 4000 mm incl. rear step protection - Scrap conveyor belt - 4 x configurable control interface - Valve terminal for 8 pneumatic clamps per side - 2 x loading status light for rotation changer - 3 x horizontal pre-crushing interface - Protective cabin for rotation changer incl. light curtain, protective grille and signal light - Status lights below and above - Video surveillance with camera and monitor holder - incl. extraction system

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration Kedpfewxar Djx Agzjfa

Condition: ready for operation (used), Year of construction: 2018, This ECKERT Onyx was manufactured in 2018. It features a robust table size of 2500 × 13000 mm and a cutting table of 2500 × 13500 mm, equipped with two fume exhaust channels. It includes two gas cutting heads capable of handling up to 300 mm thick mild steel and a Kjellberg Smart Focus 300 plasma source. Ideal for large-scale cutting tasks. Contact us for more information about this machine. Application Types Cutting Kfsdpfxjx D N A Ts Agzsa

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 1,800 mm, total height: 900 mm, working range: 1,500 mm, total length: 3,300 mm, warranty duration: 12 months, working width: 1,600 mm, working height: 196 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,400 mm, The object of sale is a new automatic corner cutter module for non-standard pallets together with ABB robot and automatic nailing machine for non-standard pallets. The corner cutters can be part of a finishing line that will include milling machines, printers, corner cutters and a robot for stacking pallets, as well as a receiver for finished stacks. Each device is equipped with a separate control module with a touch screen. We have videos of the operation of the device (we can send them via email, whatsapp phone, etc - contact us!). The device is available for testing at our plant in Słudwia 12C 72-310 in West Pomeranian province. Technical spec. of the standard module (as an option, we can prepare a module even for 5000mm pallets): Pallets: Height: 111-196mm Width: 600-3000 mm Length: 600-5000 mm Technical requirements: Electrical voltage: 3-phase 400 V, 50 Hz Electrical power: 13kW(4x3 kW + 2x0.5 kW) System pressure: 6-10 bar Kjdpst R N Ezofx Agzofa Nominal pressure: 6-7 bar Ask us for an offer! You are welcome to visit our plant to see the device! We specialize in the production of non-standard pallets for more than 12 years. Take advantage of our experience!

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt Kfedpfxex Ap Sfo Agzea X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi Kfodox Hxq Ijpfx Agzja • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses

Year of construction: 2012, operating hours: 14,534 h, condition: ready for operation (used), General Data Machine weight 13000 kg Control Unit Brand BYSTRONIC Model ByVision Cutting Main Drive Laser power 3000 W Table Table load 750 kg This Bystronic Bysprint Fiber 3015 3kW was manufactured in 2012. It features a max laser power of 3,000 W and handles sheet sizes up to 3000 × 1500 mm. It supports a max cutting thickness of 20 mm for steel and 12 mm for stainless steel and aluminium. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint Fiber 3015 3kW machine we have for sale. Contact us for more information about this machine. Application Types Kfjdpfsx D R Ttjx Agzea Cutting

Condition: ready for operation (used), Year of construction: 2014, operating hours: 32,457 h, Control Unit Brand BYSTRONIC Model na This Bystronic ByAutonom 3015 was manufactured in 2014. A robust CO2 laser cutting machine from Switzerland, it features a 6kW laser power and can handle steel up to 25mm thick. With a maximum positioning speed of 169m/min and a quick table changeover time of 22s, it's designed for efficiency. Consider the opportunity to buy this Bystronic ByAutonom 3015 CO2 laser cutting machine. Contact us for more information about this machine. Kfodpfx Agox D S Ewezoa Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Kedpfx Agsx D Ey Iozjfa Machine weight 5500 kg Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand SIEMENS Model General Data Measurements width 2100 mm Measurements depth 7000 mm Measurements height 1155 mm Max Material Thickness Stainless steel 6 mm Aluminium 6 mm Additional Equipment Plasma Source: HYPERTHERM POWERMAX 1000 This SPIRO 6000V4 plasma cutting machine was manufactured in 2016. It features a large work table of 6000 x 1500 mm and can handle materials up to 6 mm thick, including steel and aluminum. Equipped with a SIEMENS controller and HYPERTHERM POWERMAX 1000 plasma source, it supports DXF file import/export. Ideal for medium to large industrial settings. Contact us for more information about this machine. Kodpfx Aox D D I Rjgzefa Application Types Cutting

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,802 h, Control Unit Brand BYSTRONIC Model ByVision This Bystronic BySprint Fiber 6520 was manufactured in 2016. It features a 6 kW laser power, handling work table sizes up to 6500 mm x 2000 mm. It efficiently processes materials like carbon steel, copper, and brass. The CNC control system, BYSTRONIC ByVision, includes a touchscreen and remote control for cutting parameter adjustments. Consider the opportunity to buy this Bystronic BySprint Fiber 6520 fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting Kfodpsx D Npyefx Agzja

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 5500 mm Measurements depth 8100 mm Measurements height 2500 mm Main Drive Kfjdpfx Agjx D Nuiozoa Number of axis 4 Additional Equipment Dust & Fume Extraction System: Air Flow: 12000 m³/h Filter Area: 171 m² This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,023 h, General Data Measurements height 2500 mm Dimensions Machine Length 5000 mm Kjdsx D Hf Eepfx Agzofa Movement X-Axis Movement 3000 mm Z-Axis Movement 178 mm Y-Axis Movement 2000 mm Main Drive Number of axis 3 This 3-axis Flow MACH 3 3020B was manufactured in 2013, featuring a 3000x2000 mm working area and a high-pressure 30 HP HYPLEX Prime pump. It operates at speeds up to 12,700 mm/min and has accumulated 7023 cutting hours. Ideal for precision waterjet cutting, consider the opportunity to buy this Flow MACH 3 3020B waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, Main Drive Number of axis 5 Additional Equipment Smart Abrasive Reserve Tank Included Tank Capacity: 350 kg Tank Pressure: 6 bar Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) Kfsdpfx Aex D Hlrjgzja This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Application Types Cutting Kjdpfjx E Edfex Agzsfa