Used Corrugator for sale (333)

Year of construction: 1970, condition: good (used), functionality: fully functional, STC-Ref:G-251-6113 Bobst Standard 1300 grooving machine, Year: 1970 format: 100 x 1300 mm equipped: - creasing machine Nedpfx Aoxw H N Dogzsdf - corrugated board max. 3 - 7 mm max. - speed 100 m/min. max. - paper size max. 13,5 x 130 cm cm - paper size min. 8 x 13,5 cm - paper thickness 0,5 - 4 mm --> available: 12/2025

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Njdpotqpd Hefx Agzsdf

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Ndsdpfx Agsxwyvqjzjf

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. Ndedpfxoxl Tals Agzof FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: good (used), Year of construction: 2008, functionality: fully functional, Bahmüller Turbox BJD 2100 Max. Size: 2100x1200 mm Min. Size: 380x160 mm Nsdpfx Agsxni D Ejzodf Longitudinal seam gluing Automatic bottom 4-6 point gluing Solid board: 800-1500 g/m² Corrugated: N, F, E, B, C, A, EE, EB, BC etc.

Condition: excellent (used), Model: EM6-50MT Year of manufacture: 2008 Serial number: 58060 Dimensions: 600 x 300 x 550 Corrugated cardboard cutting machine with cutting and winding tools, unwinder, work table, control cabinet, and operator terminal. Ndsdpfxoxqm Nke Agzef

Condition: used, functionality: fully functional, total length: 1,300 mm, total width: 700 mm, total height: 1,500 mm, overall weight: 160 kg, The GEA UM600 dumpling roller is an essential solution for food manufacturers wishing to guarantee uniform, standardized dumpling production. Designed to handle a wide range of products including meat, fish and poultry, as well as vegetarian options such as falafel and potatoes, this machine ensures exceptional consistency. Thanks to its stainless steel structure, it combines robustness and hygiene, two essential elements in production environments. What's more, the GEA UM600 stands out for its mobility, offering greater flexibility on the production line. It is also compatible with equipment such as the VM 400 corrugator, enabling seamless integration into different configurations. What's more, its ability to form pellets from 6 to 80 grams, combined with adjustable speed, meets a wide variety of production needs. All in all, this machine is a major asset for any company wishing to optimize the quality and consistency of its products. All stainless steel Meatball rolling machine Width 600 mm For forming meatballs from 6 to ± 80 g Suitable for in-line forming (VM 400) Adjustable speed Mobile Dimensions (L x W x H): ± 1,300 x 700 x 1,500 mm. Nodsu E R Emepfx Agzedf

Year of construction: 2009, condition: good (used), Complete Textile Conveyor Belt Production Factory Machines for Sale! Don’t miss this incredible opportunity! We are offering a complete range of machines from our textile conveyor belt production factory—all in great condition and ready for immediate sale. What’s Included: All machines necessary for textile conveyor belt production Well-maintained and fully operational equipment MILLS: 1st.​Corrugate broker mills 500x1500 ​150 HP electric motor and reducer with electric panel​ 2nd. ​Twin/Double refiner mills 500x900 ​100 HP electric motor with electric panel​ 3rd.​Mill 500x1550 ​100HP electric motor and reducer ​with electric panel​ 4th.​Mill 400x1400 ​40HP electrical motor and reducer ​with electric panel​ 5th.​Mill 400x1250 ​30HP electrical motor and reducer With electric panel CALENDERS:​ 1st.​ CALENDER with 4 cylinder 400x1250 ​80 kw DC motor ​electric motor with speed control panel, ​Let off-wind up and all accecories 2nd.​CALENDER with 3 cylinder 500x1650 ​150 hp DC electic motor with speed control panel ​Let off-wind up and all accecories BANBURY MIXERS: ​ 1st.​ FARREL BRAND 80 liter banbury mixer ​150HP electric engine motor with electric panel board plus ​steel constration platform 2nd.​Knider rubber compound mixer with 70 liter capasity ​100HP electric motor and reducer BATCH OFF: Rubber compound forming machıne VULCANIZATION PRESS: ​ 1st.​VULCANIZATION PRESS ​SIZE: 1550X7650 two dayliglt ​16 pcs.(400x500) hydraulic piston cylinder with power pack platform ​let off/wind up ​strecher system with electric panel ​ 2nd.​VULCANIZATION PRESS ​SIZE: 1850x5500 ​8 pcs (400x500) hydraulic piston cylinder with power pack platform ​let off/wind up ​strecher system with electric panel ​ 3rd.​VULCANIZATION PRESS for repair and control of conveyor belts ​SIZE: 500x1400 with electric panel with two piston. 4rd.​VULCANIZATION PRESS for splıceıng of conveyor belts ​SIZE: 1100x1600 with two piston and hydraulic power pack. 5 UNIT CHAIN BUCKET: and belt conveyors for rubber compound transfering systems with electric panel. CONVEYOR BELT PREPARE AND MAKING SYSTEM: wıth 5 let off statıons 1 wınd up and electric panel. STEAM GENERATOR: wıth water tanks and electric panels presure : 8 bars capacity 1000 kg/hour LABS EQUIPMENTS: Computerızed tensile testing device Reometr computerızed rubber compuond tetsing device Hardness control device Abrassıon testing device Precısıon sensıtıve scale Rubber testıng electric lab press for rubber sheet Nodexzzcmjpfx Agzedf AIR COMPRESORR: Atlas Copco 8 Bars. WATER COOLİNG SYSTEM: Water pomp and water tank

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 2,900 mm, total length: 1,200 mm, total height: 4,000 mm, Trim separator, filters, fan, and control cabinet – complete set for connection to a corrugator. Airflow rate 50,000 m3/h, motor power 7.5 kW, voltage 400V. Nodswlrm Tjpfx Agzedf Please provide a number in your reply to simplify contact, e.g. via WhatsApp.

Year of construction: 2022, condition: ready for operation (used), Technical specifications: Sheet Max. sheet size: 1060 x 740 mm Min. sheet size: 400 x 360 mm Stock range: Paper from 90 gsm Cardboard 157~2000gsm Corrugated board (E,B FLUTE) Min. gripper edge: 4mm Die-cutting Njdpfx Agow Hpxijzedf Max. die-cutting size: 1040 x 730 mm Max. pressure: 300 tons Max die-cutting speed: 7500 sph Max speed with stripping 6500 sph Rules height: 23.8 mm Main motor capacity: 11 kW Total power capacity: 23 kW Dimensions (L x W x H): 6000 x 4200 x 2400 mm Net weight: 16,000 kg 2 pcs die-cutting plates 2 pcs Die-cutting frames 1 pc tape inserter

Condition: used, Year of construction: 2004, operating hours: 20,676 h, overall weight: 4,100 kg, rotor diameter: 370 mm, number of blades: 37, rotor width: 1,300 mm, power: 55 kW (74.78 HP), 1 corrugated shredder plant for shredding: paper, chipboard, various plastics Chain conveyor belt width 1000 mm Screw drag chain conveyor KKF 500-1K-U/TS315 Nedsxwa T Njpfx Agzsdf Individual sale possible!!!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, working width: 2,700 mm, Kryma SK2800 automatic slotter with vacuum autofeeder, machine have been used very little and is in perfect condition and available anytime. Speed is approx. 2000pcs per hour. Machine can do up to 10m long sheets. Video can be sent upon request. Also available Kryma flat bed roller die cut like new, and Sunthinks SC860 single pass printer with auto feeder. * We can arrange transport within Europe, and give offer with transport included if of an interest. Nedpfx Astth Iaegzsdf

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Nodjxgqy Ejpfx Agzjdf Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: new, machine/vehicle number: 179, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions Interior length approx. 4,880 mm Interior width approx. 2,420 mm Overall width max. 2,550 mm Unloaded loading height approx. 1,510 mm Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipper booms and rear tipper shaft; Plug lock for tipper body with crossover safety device Drawbar Cranked drawbar with height-adjustable heavy-duty 50 mm bolt-on drawbar eye Nodpfx Agoiyrtujzodf (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unloaded approx. 800 mm - max. 1,000 mm Support device At the front 1 mechanical support winch with crank on the left in the direction of travel, make of your choice, 1 access bracket bolted on Axles SAF intradrum axles with drum brakes, S-cam brake 420/180 mm, load capacity 9 t/axle, reinforced axle beams, off-road version, automatic brake slack adjusters brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 164K, make Fulda Regiotonn 3 HL (tire load capacity 10t / axle) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire Without spare rim(s) Brake system/suspension Brake system in accordance with EC Directives 71/320 and ECE R13 Dual-circuit air brake system Knorr brake system EBS system 2S2M, 2nd axle sensed RSS/RSP - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems SWIT - Schwarzmüller Intelligent Telematics, "BASIC" service package Tipper bridge Welded steel construction Fixed sheet steel front wall 4 mm, approx. 980 mm high 2 steps on the inside and 1 on the outside of the front wall Fine-grain special steel floor plate 5 mm (Slight floor corrugation possible due to welding distortion) 5 pairs of swing-up lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, can be folded down with extended swivel bolt locks and spring lifting aid, as well as additionally swingable Left and right side walls with manual central locking 2 rear corner posts at dropside height, fixed to the side Sheet steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed bearing hooks for dosing chains on rear wall and underside of bridge Rear wall lock = automatic pneumatic lock 2 dosing chains for the pendulum rear wall With sealing strips Hydraulic system 1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling Tipper press for 3-sided tipping, initial lifting force approx. 30 t; 1 catch

Condition: used, maximum load weight: 27,886 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 06/2025, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total width: 2,600 mm, Equipment: ABS, Schmitz Cargobull SKO 24 /L FP 45 Cool with Pharma Certificate Nsdpot Dtb Hefx Agzedf Qualification certificate for pharmaceutical acceptance * FP 45 SMART * S.KO Cool with EXECUTIVE Package S.CU V 2.0 * Body strength certified according to DIN EN 12642 Code XL ("TÜV load safety certificate") * Wheelbase 7600 mm * Schmitz axles with air suspension and disc brakes * Hubodometer * Jost supports * LED lighting system 24V * 2 reversing lights * 6-wheel 385/65R22.5 * Height V-DOST system type B1650 for 11x3 EURO pallets, with corrugations and rails without load bearing * S.CU V 2.0 with electric motor, with battery * SCHMITZ-WEISS paint finish For further information please do not hesitate to contact us

Condition: used, Year of construction: 2006, Year of manufacture: 2006 Condition: Very good condition Carton gluing machine suitable for producing: - Standard cartons with 1-3 gluing points from folding boxboard - Clamshell cartons with double fold - Mailing envelopes Materials used: - Folding boxboard 200-600 g/m² Njdpfxeww H S Ue Agzedf - E-flute corrugated board Configuration for standard cartons: - Timing feeder for folding heavy carton types (1 vibrator, 2 air blowers) - Power bridging shaft between feeder and pre-folding station - 3 intake rollers incl. mounting above the bridging station, for very wide products - Digital indicators for faster machine setup - Pre-folding station - Bottom gluing unit incl. applicator wheel (left side) - Folding station - Transfer station - Collection and pressing station - Electronic counter - Pneumatic marking device (compressed air required) - Speed: 400 m/min - Video camera for monitoring the transfer station (camera + monitor at the feeder) - Additional device for producing auto-bottom cartons - 1 device for auto-bottom cartons - 1 soft rubber belt including guide parts and holders - 1 device for pre-breaking the third crease for auto-bottom cartons Additional equipment for other folding methods: - 1 device for folding clamshell cartons with double fold - 1 device for folding sleeves (CD sleeves) 120–380 mm Gluing unit: - 1 HHS gluing unit with holders for dispersion glue application from above - 2 application nozzles for top gluing - 4 controlled channels - 2 light barriers - 1 gluing station - 1 fill level sensor

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Ndodpfx Aoi Rixrogzsf Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Condition: good (used), Year of construction: 2019, functionality: fully functional, The Kolbus AB300 is a fully automatic, modular machine for manufacturing corrugated cardboard boxes, capable of producing various box styles (such as 0201, tray, wrap, and pallet boxes). Key specifications include a maximum speed of up to 100 m/min, fully automatic set-up via touchscreen, a maximum blank width of 2590 mm (102 inches) with unlimited length, and the ability to produce over 100 different box styles. The machine offers high flexibility, enabling quick changeovers between different sizes and styles. Technical Specifications Maximum Speed: Up to 100 m/min Widths: From 100 mm up to 2590 mm (102 inches) Length: Unlimited Box Types: Over 100 different box styles, including 0201, wraps, pallet boxes, and partitions Control: Fully automatic set-up via touchscreen Energy Efficiency: Up to 75% energy savings compared to conventional machines Material: Suitable for all types of corrugated board Optionally available: Godswill gluing machine Type: GSS-600 / GSS-600L Nsdpfx Agexpga Tszodf Stitching speed: max. 600 stitches/min Number of stitches: 1–99 stitches Stitch length: 10 mm Stack height: 850 Max. product size: 1600 mm W × 1500 mm L / 2250 mm W × 2500 mm L Power: 12.5 HP / 14 HP Machine weight: 4000 kg / 4500 kg

Condition: excellent (used), Year of construction: 2014, About the Machine The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerless print and apply labeling system with stand. • Sorting, consisting of: • Multiple parcel sized outputs into 1 meter (39 in.) containers • Bin Confirmation sensors • Tray label printers • Overhead system displays for the operators The system is design to handle throughputs up to 5,000 pph. Parcel Specifications The system can handle various types of parcel products including but not limited to envelopes, corrugated boxes, polybags, cellophane covered boxes, soft packs, and vacuum-sealed products. The table below specifies the range of product for the Parcel Manager system. Feeding limitation includes high aspect ratio, the proportional relationship between its width and its height, pieces and pieces with significantly irregular surfaces. The product can be fed and processed in either portrait or landscape orientation. Ndsdpfsixz Iqex Agzef Below the specifications for packages that the Parcel Manager can handle. Parcel Specifications Length (distance along transport path) min. 150 mm (5.9 in.) max. 600 mm (23.6 in.) Width (distance perpendicular to transport path) min. 100 mm (3.9 in.) max. 300 mm (11.8 in.) Height/thickness (distance above transport bed) min. 5 mm (0.196 in.) max. 160 mm (6.3 in.) Weight min. 0.014 kg (0.03086 lb) max. 13.6 kg (30 lb)

Condition: reconditioned (used), Year of construction: 2010, machine/vehicle number: D0A361109, total width: 2,210 mm, total length: 1,175 mm, total height: 1,380 mm, power: 1.5 kW (2.04 HP), year of last overhaul: 2025, warranty duration: 6 months, overall weight: 350 kg, Rondo Kombi Dough Sheeter SKO 611 Stainless steel model with computer control – the professional dough sheeting machine for your bakery The Rondo SKO 611 is a professional stainless steel dough sheeter that combines maximum precision with ease of use. Thanks to modern computer control, programs can be saved and recalled – ideal for croissants, puff pastry, pizza, or bread dough. As a reliable bakery machine, it is distinguished by its hygiene, convenience, durability, and maximum efficiency in the bakery. Used machine – professionally refurbished Stainless steel model 6-month warranty* Features: + Mobile combination dough sheeter + With computer control & LCD/LED display + Suitable for sheeting and laminating all dough types + With automatic flour duster + Equipped with new felt & linen belts as well as new scrapers + All relevant parts have new felt coverings + With drag net & corrugated mat for wrapping dough pieces / rolls / loaves + With lower long-rolling station for all dough types *Excluding: controller / circuit board / display Technical data: Year of manufacture: 2010 Serial no.: D0A361109 Belt width: 635 mm Roller width: 670 mm Roller gap: 0.3 to 45 mm Dimensions: Working position: 2210 x 1175 x 1380 mm (W x D x H) Resting position: 1600 x 1130 x 1700 mm (W x D x H) Electrical connection: 400 V – 50 Hz – 1.5 kW Fuse: 16A CEE plug Upon request and for an additional fee, bak-tec can disassemble and reassemble the machine on site for entry into your bakery. Nedpfx Agsk E I Tmjzodf

Condition: used, Year of construction: 2008,   Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Nsdjxdnbzjpfx Agzodf Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality.

Condition: refurbished (used), The angled conveyor from MTF is available for sale. Feed length: 1300 mm Elevating belt: 1300 mm Maximum drop height: 1200 mm Usable width: 240 mm Total width: 520 mm New motor protection New conveyor belt with corrugated edge Corrugated edge: 300 mm Cleat height: 30 mm Belt speed: 4.2 m/min Njdsxmut Nspfx Agzedf Mobile, with new running rollers

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Ndjdoi Ri Ilopfx Agzef Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: used, operating hours: 5,500 h, Used bottling line SIG for milk and juice year 2023 Overview of the SIG bottling line for milk and juice Njdpfx Ajxcwxmogzsdf The used bottling line SIG for milk and juice year 2023 delivers a complete solution for aseptic packaging of liquid food products. Manufacturers designed it for high-speed production, reaching a capacity of 24,000 bottles per hour. Consequently, the line suits bottling operations for UHT milk and fruit juice. In 2023, manufacturers supplied all core machinery, except for a 2024 format kit. Therefore, this recent build ensures the line meets current industry standards and safety requirements. SIG CFA 1224-37 filler and sterilization system The SIG CFA 1224-37 filling machine serves as the core of the used bottling line SIG for milk and juice year 2023. Engineers designed this filler to handle sensitive liquids in sterile conditions. Moreover, the system includes a hydrogen peroxide supply unit from SIG, which sterilizes containers during the packaging process. The line has operated for 5,400 hours, and SIG’s technical team performed 4,000 hours of scheduled maintenance, ensuring mechanical reliability and hygienic integrity. As a result, the line maintains high uptime and minimizes production risk. Auxiliary components for line balancing and accessory application To optimize process flow, the Meurer buffer table balances upstream and downstream operations, ensuring consistent line speed and reducing downtime. In addition, the Geyssel straw applicator applies straws automatically to single-serve packaging formats. Engineers integrated these units to support flexible production layouts and packaging variants. For instance, these components are ideal for producers targeting school milk programs or portion-controlled juice formats. Secondary packaging and end-of-line systems The Meurer cardboard packer performs automatic secondary packaging into corrugated boxes. Technicians synchronized it with the filling and sealing units for seamless transfer. Furthermore, the SIG sterile air unit supplies and exhausts filtered air, maintaining aseptic conditions in critical zones of the production line. This is particularly important when operating under stringent food safety regulations. In this context, system reliability becomes essential for quality assurance. Air treatment and steam generation units Among the supporting systems, the Balance Air Equipments wet scrubber (2,500 CFM) treats exhaust air by neutralizing volatile substances generated during production. Consequently, the system helps meet environmental compliance standards. The steam generator (150 kg/h) from Forbes + NSK Engineers provides the necessary thermal energy for CIP cycles and sterilization. In this way, operators can maintain hygiene and system cleanliness efficiently. Additionally, these auxiliary units improve the overall sustainability and operational safety of the plant. Additional format kit for production flexibility In 2024, the supplier added a 65 ml – 1X100 format kit to increase the system’s versatility.

Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuation The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high Turntable with strong ball bearing slewing ring 8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each 7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Quarter-shell mudguards according to EG with anti-spray flaps according to EG Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Steel floor Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor undulation possible due to welding distortion! Drive-on ramps Lockable storage space for loading ramps underneath the loading area Operating instructions A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Ndsdpfei Ri Nusx Agzsf Frame DB 7350 nova gray 15-year warranty against rusting through Note: Bottom corrugation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive pictures!