Buckle folder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Round pile feeder, Excluding pump(s), 16 page folder, First buckle folding section with 4 buckle plates, model: 78.4 (78 cm), Anti noise hood(s), Second buckle folding section with 4 buckle plates , model: 66.4 (66 cm), Anti noise hood(s), Third buckle folding section with 2 buckle plates, model: 56.2 (56 cm), Horizontal stack delivery with pressing and marking device, model: SBP.D-46 MKE VE, Specifications are subject to manufacturers changes in similar models, Maximum sheet size, width x lengt... more
6
Round pile feeder, Pump, Counter, 16 page folder, First buckle folding section with 4 buckle plates, Second buckle folding section with 4 buckle plates, Third buckle folding section with 2 buckle plates, Anti noise hood(s), Horizontal stack delivery with pressing, model: SBP 66, Age: 2005, Specifications are subject to manufacturers changes in similar models, Maximum sheet size, width x length (cm): 82 x 128 cm, Minimum sheet size, width x length (cm): 14 x 18 cm, Minimum sheet size with twin s... more
6
combined Heidelberg stahlfolder T 36-4-KB-F2-SA built 1992 in good condition smallest fold length minimal 20 mm Dvhlxzr flatpilefeeder F2 EVZ batchcontrol section 1 with 4 buckles 36cm section 2 mountable crossfold KB-36 built 1988 mountable delivery belt more
5
pharma or small sized stahlfolder T 36-6-4-F2-SA built 1991 flatpilefeeder F2 control section 1 with 6 buckles 36cm Ps0him section 2 with 4 buckles 36cm mountable section 3 crossfold mountable delivery belt more
6
Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery Mummr more
4
Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: Bw3u7bpg • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery more
6
Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention 2pkthvo7p more
6
Size max 520 x 840 mm min 140 x 180 mm N7edxsrt Speed max 180 m/min Equipment: • flat pile feeder with Tremat suction head 1st folding unit: • 4 buckle plates • separate deflectors • motorized setting of buckle plates • noise prevention more


buckle fol...
every day

New machines via email!

Be informed!
5
Size max 1.420 x 1.650 mm min 500 x 500 mm Speed max 150 m/min Equipment • pallet feeder • counter DCT 2000 • counter • air stream table 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts 2nd folding unit: • 4 buckle plates 2pkwqsmz0 • rear-mounted slitter shafts • double production device 3rd folding unit • 2 buckle plates • rear-mounted slitter shafts • double production device delivery: • belt delivery more
6
Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft Pjuvczx9 delivery: • belt delivery more
6
Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Power requirements 2 kW (220/380V, 50Hz) Length 2.130 mm Width 1.230 mm Height 1.500 mm Weight 370 kg (approx.) Equipment G3r9zji8w • flat pile feeder • counter EVZ 30 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • mobile knife-folding unit KB 36 peripheral units and deliveries • belt delivery more
1
Size max 520 x 740 mm min 100 x 150 mm Jub0ty Buckle width min 45 mm Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention delivery: • belt delivery more
2
pneumatic Gatefold Buckle Plates 78 cm The double-gatefold is a popular folding method amongst graphic designers. However, with the equipment available much experience and skill was needed on the part of the operator in order to deliver the job on time and in the high quality required. 2peoym ACC 2.4 Control Module The ACC 2.4 is a digital control module for operating gate fold buckle plates, gluing equipment, and timed perforating heads. A combination of integrated functions inline with th... more
3
The Morgana DocuFold Pro is a fully automatic paper folding machine, ideal for folding litho or digital stock. Equipped with the latest SmartScreen technology, it enables an operator with minimum training to carry out a variety of folds from an icon driven touch screen. An unlimited alpha numeric memory is available to store all standard and non standard jobs. Key to the Morgana DocuFold Pro design criteria was a machine with a high degree of automation. Operation is therefore simplicity itsel... more
2
automatic adjustable pocket folding machine Baeuerle Multimaster CAS 52-4-FL50 SA age 2002, very good condition - feeder and delivery automatic adjustable - reset counter, pre-selection counter - double sheet detector - rulers and pockets automatic adjustable 8m3kqq9oy - all folding rollers adjustable - flat pile feeder FL 50-2 - size min 10x12cm, max. 52x85 cm - 1. unit 4 pockets 52cm, rear-mounted slitter shaft - stream delivery - noise reduction covers - compressor more
4
Product: Buckle plates Folding machine Manufacturer: Stahl Model: TD66/4-4 Year: 1998 Equipment: digital control 9hqj9nnnr round pile feeder RD66-T 1st buckle folding station with 4 buckles 2nd buckle folding station with 4 buckles shingle delivery with compression station and marking device SKP 66.D + MKE. Optical/Technical condition: top, regularly serviced and maintained Location/Status: Germany/on stock, near Potsdam Available: shortly upon agreement Price/Terms: upon request more
2
1.2metre Trident Box and pan sheet metal folder D2gdenf more
2
New Box and Pan Folder 1260mm x 1.5mm New Box and pan folder, many other sizes and capacities avaialble. Working Length: 1260mm Folding capacity: 1.5mm Top beam stroke: 40mm Bauu9uwqrc Max folding angle: 135 degree Length: 1600mm Width: 880mm Height: 1180mm Weight: 450kg more
4
Used Edwards Box and pan folder Edwards Box and pan Folder Dv2uze Complete with segmented fingers Capacity: 1250 x 2mm more
3
M8w7dUsed Powered box & pan folder ? 3metre x 3mm powered box and pan folder     more
3
Used Walton Box and Pan Folder, Folding Machine 2500 mm x 14 Guage M8w3z /w segmentierte Finger more
5
Used RAS 62.30 Turbobend CNC Folder Year 2014 Dygxme2 Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 ? 1,550mm, back gauge accuracy +/- 0.15mm, accessories more
6
Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam tra... more
2
Cxsw8sy3KEETONA HUF 100? X 1/4? (2540MM X 6MM) 100 inch x 6mm 60? X 5/16? (1524MM X 8MM) OR 40? X 3/8? (1016MM X 10MM) HYDRAULIC FOLDER WITH ELGO 89 P23 2 AXIS PROGRAMMABLE CONTROL Capacity : 100? X 1/4? (2540MM X 6MM), 60? X 5/16? (1524MM X 8MM) OR 40? X 3/8? (1016MM X 10MM) Control: ELGO 89 P23 Top beam rise & fall: 7? (178MM) Bottom beam adjustment: 2? (51MM) Maximum length of bend: 100? (2540MM) Input: 400/440/3/50 AC 10 HP APPROX Fitted with: FULL LENGTH TOP SEGMENTAL TOOLING Equipment: F... more
6
Ssk2c0 Type: R960, Feeder Mode: Round pile feeder, Control Unit: MBO Navigator-Control, Type: T960-2-780/2, Pockets: 2x, MWK slitter shaft cassette for short set-up time, Noise Protection Hood, Type: T960-2-780/4, Pockets: 4x , with slitter shafts for creasing, perforating and trimming, Noise Protection Hood, Type: MBO T960-3-68/2 RFE, Pockets: 2x, with slitter shafts for creasing, perforating and trimming, Noise Protection Hood, Vacuum pumps, Sheet size max: 960 x 1450 mm, Sheet size min: 1... more
6
Size: 78 cm Video (deutsch): [...] Video (english): [...] Machine: Buckle plate folding machine MBO Feeder: - Rotary continuos feeder T800 - Dualfeed - VIVAS - Anti-static lattice-type alignment table . 1st folding unit: MBO T 800.1 - 1 - 78 / 6 Built: - 2004 - Until 2006 Showroom machine, 2006 General overhaul by MBO Working width: - 78 cm Control: - Navigator control - Basic control 800 Equipment: - 6 NIRO buckle plates with swing deflectors - Spiral fold rollers with Standard PU - roll... more
6
99l93n9qb Type: FP 120, Feeder Mode: pallet feeder, Control Unit: Navigator-Control with touch screen, Electrical double sheet control, Pockets: 6x, Cross fold unit with 2x knives, Second Knife aligned to: Left, Knife-folding range as S-KTZ version, MWK slitter shaft cassette for short set-up time, Noise Protection Hood, without delivery, Sheet size max: 780 x 1.200 mm, Max. mechanical speed: 210 m/min. more
6
Type: R 800, Feeder Mode: Round pile feeder, Control Unit: MBO Navigator-Control, Year: 2004, Serial number: 10 23551, Type: T 800 1-1-78/4 MWK, Year: 2004, Pockets: 6x, Working width max: 780 mm, with slitter shafts for creasing, perforating and trimming, Noise Protection Hood, Serial number: 10 23551, Type: T 800.1-2-68/6 MWK, Year: 2004, Pockets: 6x, Working width max: 680 mm, with slitter shafts for creasing, perforating and trimming, Noise Protection Hood, Serial number: 10 23551, Type: T... more
6
Size: 66 cm Machine: Buckle plate folding machine Stahl Feeder: - Rotary continuos feeder RF 66 V Feeding width: - 66 cm 1st folding unit: TF 66/6 Q Equipment: - 6 buckle plates for parallel fold - Counter - Noise abatement 2nd folding unit: TF 66/4 QB Equipment: - 4 buckle plates for parallel fold - Noise abatement Delivery: - 1 Stream delivery General condition: - As is . Power supply: This machine is connected to 400 V, 50 Hz. Important: Connection requirements of any power utility note!... more
6
Type: PFH-66, Feeder Mode: Palet feeder, Year: 2004, Serial number: [...] Type: BUH-66, Year: 2004, Pockets: 4x , Working width max: 660 mm, Cross fold unit with 2x knives, 1x Side pocket, Touch Screen Control, Compressor included, Vacuum pumps, Sheet size max: 660 x 1280 mm, Sheet size min: 140 x 180 mm, Max. mechanical speed (cykles): 50.000 99l9jluh9 more
6
Cwx3ue7c Type: FL 2-50, Feeder Mode: Flat pile feeder, Year: 2011, Serial number: 57664, Type: Rotary scoring & cutting machine, Year: 2011, Pockets: n/a, Working width max: 80 - 540 mm, Fold length max: 180 - 1.000 mm, Serial number: 57662, Roller diameter: 40 mm, Balls diameter: 35 mm, Roller gap: 46 mm, Type: FA 50/4, Year: 2011, Pockets: 4x, Working width max: 700 mm, Serial number: 57663, Size min: 105 x 145 mm, Size max: 500 x 700 mm, Mechanical Speed: 40 - 160 m/min, Delivery mode: Shi... more
6
Ewijkkwt8 Type: FFH-56, Feeder Mode: Flat pile feeder, Max. pile height: 800 mm, Control Unit: id:96504, Year: 2006, Serial number: [...] Type: [...] Year: 2006, Pockets: 6x, Working width max: 560 mm, Second Knife aligned to: Left, Noise Protection Hood, Type: 2. BUH-56, Year: 2006, Pockets: 6x, Working width max: 560 mm, Noise Protection Hood, Serial number: [...] Delivery mode: Shingle delivery, Type: SKP-M 66.D, Year: 1999, Compressor included, Sheet size max: 560 x 900 mm, Sheet size min... more
6
Type: FL 2-50, Feeder Mode: Flat pile feeder, Year: 2011, Serial number: 57609, Type: Rotary scoring & cutting machine, Year: 2011, Pockets: n/a, Working width max: 80 - 540 mm, Fold length max: 180 - 1.000 mm, Serial number: 57607, Roller diameter: 40 mm, Balls diameter: 35 mm, Roller gap: 46 mm, Type: FA 50/4, Year: 2011, Pockets: 4x, Working width max: 700 mm, Serial number: 57608, Size min: 105 x 145 mm, Size max: 500 x 700 mm, Mechanical Speed: 40 - 160 m/min, Delivery mode: Shingle deliv... more
6
Bacukbqicc Type: TD-112, Feeder Mode: pallet feeder, Control Unit: Digital, Year: 2011, Serial number: [...] Type: TD-112, Year: 2011, Pockets: 4x automatic pockets, Double Stream, Noise Protection Hood, Monitor Screen, Touch Screen Control, Serial number: [...] Type: TD-94, Year: 2011, Pockets: 6x pockets, Noise Protection Hood, Serial number: [...] without delivery, Sheet size max: 1.120 x 1.650 mm, Pallet feeder max capacity: 1.730 kg more
5
width 82 cm age 2010 pallet feeder PFH 82 Twin-Suction Wheel 1. station: 6 folding pockets 82 cm automatic roller setting combi folding pocket double following knife shaft with lift kit 2. station: 4 folding pockets 66 cm Na3v7 automatic roller setting automatic pocket setting following knife shaft with lift kit 3. station: 2 folding pockets 52 cm automatic roller setting automatic pocket setting following knife shaft with lift kit without delivery station 2 and 3 age 2006 more
5

saddle binder HOHNER HSB 7000

Mönchengladbach Germany
6364 km
2005
refurbished (used)
1 cover feeder CF 1 with pump 4 sheet feeder VF 2 : 1 circuit 1 separate release MS 1 1 stitcher transfer Ps7y0y 4 stitching heads 1 trimmer 1 set of knife 1 dual use equipment 1 set dual set knives without delivery more
6
Mn2rn Type: R 800 Aut, Feeder Mode: Round pile feeder, Control Unit: MBO Navigator-Control, Electrical double sheet control, Pockets: 4x , Cross fold unit with 2x knives, Second Knife aligned to: Left, MWK slitter shaft cassette for short set-up time, Noise Protection Hood, without delivery, Sheet size max: 800 x 1.200 mm, Sheet size min: 150 x 250 mm, Max. mechanical speed: 10 - 180 m/min more
3
Horizon AFC 504 AKT year 1999 D9o3nv flat pile feeder with Starlift 4 buckles 1 crossfold knife delivery more
4
The Horizon Cross Folder AFC-566 FKT built 9-2010 new rollers is a high performance, space efficient fully-automated cross-knife folding machine. Featuring advanced automation with 15 seconds setup time, intuitive/user friendly operation, i2i Network flow system, and 17 programmed fold patterns. The fully automated setup including the suction head, table guide, buckle stopper, cross-knife fold section and side lay guide for the sheet size and fold pattern are selected through the touchscreen.... more
6
Size: 52 cm Machine: Buckle plate folding machine MBO Feeder: - Flat pile feeder - Vacuspeed Etqgaxq3k Feeding width: - 52 cm Control: - MS-control 1st folding unit: T 520-1-52-4 F Equipment: - 4 buckle plates for parallel fold - Preset counter - Noise abatement 2nd folding unit: T 520-2-52-4 Equipment: - 2 buckle plates for parallel fold - Noise abatement 3rd fold unit: T 520-3-X - Mobil knife folding unit Delivery: MBO ASP 66-2 ME Equipment: - Pressing device - Mark device . Power s... more
4
pallet feeder 1. unit: 4 pockets 2. unit: 4 pockets 3. unit: 2 pockets Bbh7b3ko3i delivery SBP.D-112 + MKE, 2002 delivery SBP-86, 2009 more
6
Minimum Sheet Width 460 mm (18') Naunh Minimum Sheet Length 150 mm (6') Sheet feeder Thickness: 0,6 to 10 mm (0,016' to 0,39') Registration Accuracy* +/- 1 mm (0,04') Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specify Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 200 L/min more


buckle fol...
every day

New machines via email!

Be informed!

to

to

Change search
BUCKLE FOLDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close