Used Bobst Pcr 880 for sale (81)

Condition: excellent (used), Year of construction: 1970, Bobst SP 1420E DIECUTTER Manufacturer: Bobst Year: 1970 Model: SP1420E Maximum Size: 40 5/32" x 55 29/32" = 1020 x 1420mm Minimum size: 19 11/16" x 27 9/16" = 500 x 700 mm Speed: 4500 Sheets P/h Pressure 661 USA Tons Slide cardboard up to 1.5mm thick, corrugated board Paper from 90 g/m squared Max. speed. 4500 p/h 600 Tons Pressure Nelhccev Tmkdsqtjwd

Condition: used, Year of construction: 1998, Die-cutter Bobst SP 104-ER Year: 1998 Only around 23.000 running hours Equipped with: - Manual non-stop infeed - Quick lock in cutting chase/stripping-and blanking section - Chase loader - Two cubes - Easy transfer Nelor I Iprshccqtowd - Elevated

Condition: used, Year of construction: 1973, The Bobst SP 1120-E is a punching machine equipped with a stripping unit, designed for efficient and precise punching operations. Manufactured by Bobst in 1973, this model is located in Germany, with pricing available upon request. It features a format of 780 x 1120 mm and can handle sheet sizes ranging from a maximum of 800 x 1120 mm to a minimum of 380 x 450 cm. The machine boasts a running speed of up to 6,000 sheets per hour and a cutting force of up to 300 tons. Additional features include a platform, pallet feeding with a non-stop device, sheet feeding (OS) with double sheet detection, and a centerline. Format: 780x1120 mm Equipment: Die Cutting Machine with Stripping Unit Sheet size: maxi 800x1120 mm - mini 380x450 cm Running speed: Max. 6000 Sheets/Hour Cutting force up to: 300 Tons Platform Pallet Feeder with Non-Stop device Pull guide (OS) with Double Sheet Detector Centerline Nwslhccqjv A R I Sotjd

Condition: good (used), Year of construction: 2002, operating hours: 14,000 h, Machine Centerline system for quick job changeover PRE-SETTING TABLE : Adjustable. Allows the preparation of a second job during production, reducing machine makeready time and increasing the time available to run production. Requires: a series of supplementary stripping tools Platform covered with non-slip aluminum sheet with safety barrier Console CUBE control system Nwslhcjv A N N Uscqted Feeder Standard Feeder with all its equipment Non-stop device on feeder Pile-tray with handle allowing manual lateral correction of the pile during production Introduction table 1 Pull-lay operator side (OS) adjustable according to Centerline, with sheet control CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES Platin Diecutting chase (fixed bottom plate) COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise. Upper chase conventional : fixed bottom Stripping Station UPPER PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS 1 Fastening equipment for stripping die (F-22); included bars and fixing brackets F-35 1 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK) 1 lower stripping frame with all its standard equipment Delivery Non-stop delivery with grill Various Cutting force 250 TON Board quality processable : carta (min. 80g/m²); cartone (250/2000 g/m²); corrugato "E" e "B" (max 4 mm.) Cutting size: with frontal cut (max. 705 x 1020 mm.); without front cut (max. 720 x 1020 mm.) 7.500 speed/h (depending on cardboard and type of iob feature) Pile height at feeder : With non-stop system (max. 1100 mm.) - Without non-stop system (max. 1.400 mm.) Complete with aluminium bars, supports for noddles and noddles CE Machine All books, electrical scheme, manual instruction books, spare parts books and standard tools Adjustable gripper grip from: 9 - 17 mm

Condition: used, Year of construction: 2012, Max Material width: 430 mm Flexographic units:10 units with UV lamps last 2 units has additional hot air dryers Nslhccqsv Rnabstswd 4 digital heads for Variable data with KBA sation

Condition: excellent (used), Year of construction: 1999, A) BOBST DYNALOAD prefeeder year 1999 Njlhevuklnsccqtjwd B) BOBST MASTERFLEX 203 A MATIC flexo printer Year 1999 Feedbelt Vacuum feeder Sheet cleaner N. 6 fixed printing units from above, carbon doctor blade ink system and centerline (4 printingunits have n. 2 anilox rolls on board and 2 printing units have n. 3) QUICK Anilox Replacement System with automatic lift Vacuum transfer of printed sheets between units Integrated Registron iQ 300 Quality Printing Control with automatic ejections of non conformity and "zero defect" production output. N. 6 air dryers Sheet ejector for quality control Bobst CUBE control unit Max sheet size 1.270 x 2.032 mm. Max printing area 1.230 x 2.032 mm. Max. speed up to 10.000 s/h C) BOBST RECEPTION FLEXO non stop stacker Year 1999 Available in June 2025.

Year of construction: 1985, Condition: good (used), Bobst SP 130 E Year 1985 Njlhcjif Ed Docqtewd Max.size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. cutting force Cutting force: 500 T Centerline Immidiately available.

Condition: used, Year of construction: 1984, Die-cutter Bobst SP 142-ER Year: 1984 Hours: 29.924 (on counter; real expected production hours around 60.000/70.000) Equipped with: - Stripping and Blanking Stations - Push Lay system - Non-Stop Feeder with manual change over bars - Non-Stop Delivery - Corrugated board feeder - Quick locking Tooling in Stripper - Micrometric system Technical specifications: Nolhccjr I Ipveqtjwd - Max cutting speed : 6.000 s/h - Max sheet size : 1420 x 1020 mm - Min sheet size : 700 x 500 mm - Cutting force : max. 600 T - Solid board up to 2.000 g/m2 - Corrugated board up to 4mm thick

Year of construction: 1990, Condition: reconditioned (used), ELEVATED MACHINE Machine elevated 415 mm Centerline for job quick change Electronic device for sheet travel control Air conditioning for the electrical cabinet NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try Introduction table covered by antistatic steel stainless plate Nwelhccqsfpwiaoted Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle Feed belt slow-down device Ensures smooth arrival of sheets against front lays 4 front lays, adjustable in pairs with front register control Pull-lay operator side (OS) adjustable according to Centerline, with sheet control "Double sheet "detector Upper frame with manual lifting device Sheet-hold down device (guiding the sheets to front lays) Upper transport equipment for paper, paperboard and corrugated board Transport belts. With lateral guidance Heated upper platen with 16 heating zones Grippers re-opening device Equipment centering and locking Locking of the chase against the upper beam Measurement of the die-cutting force using an electronic probe Steel material print supporting plate Compensating plate, thickness 3 mm (E-52). Compensation plate, 3 mm thick (E-52). It is used as a cutting plate for die cutting and as compensation plate together with the 2.3 mm thick printing plate for printing and embossing Honeycomb frame (E-6) Includes a series of cliché fixing accessories. To specify: height of the clichés of 6.35 or 7 mm Compensating plate, thickness 2,3 mm (E-62) 1 HONEYCOMB FRAME. It includes a series of accessories for fixing the clichés. 1 unit with the basic machine •Pile tray •Braking Brush Pneumatically controlled adjustable front joggers AUTOMATIC NON-STOP BELT. Pneumatically controlled adjustable lateral and front joggers with Centerline marks Removable tape feeding module. Including a trolley equipped with: 3 shafts for adjusting the advancement of the belts driven by motors 2 additional roll-holder axles for preparation outside the machine 3 sets of 8 roll holders with 3° combined spindles consisting of: 1 set of narrow rolls; 1 set of medium coils; 1 set of reels with brake 30 wide drive rollers, 38 mm wide • 1 automatic device for putting the platen "on and off" pressure 1 Margin line. Facilitates the positioning of clichés 1 device for manual tapes introduction (mounted on the autoplaten) 1 blower with nozzles to detach the belts after printing (mounted on the platen) 1 blower inside the platen to stabilize the sheets of paper before printing or die-cutting (mounted on the platen) 1 belts guide on the upper post (mounted on the platen 1 belt tension shaft driven by a motor with air cooling device (mounted on the platen) 1 bands break control system with 16 photo-electric cells with lateral adjustment for immediate machine stop in case of band breakage 1 lateral evacuation device for metal band with rotary brushes at variable speed depending on the advancement of the belts (mounted on the platen) 1 longitudinal belts cutting device (mounted on the platen) Operator safety devices Gripper Bar Chain Slip Clutch Handling of the diecutting equipment Emergency Stops Photoelectric cell safety barriers located at the feeder and at the delivery

Condition: good (used), Year of construction: 1968, Machine Pressure 500 Ton Machine complete with all its tools in order to work properly Nolhccqsv Rtm Hstswd Introduction table Pull lay operator side Stripping Station Stripping Station

Condition: used, Year of construction: 1988, FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" Nwjlhccjv Ifpueqtod with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE Njljv Nywvehccqtewd 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Year of construction: 1987, Condition: good (used), Bobst SP1600 E Year 1987 Max. size: 1115 x 1600 mm Min. size: 600 x 850 mm Nolhccqor Dfi Rjtswd Max. cutting force: 750 T Centerline Non-Stop Chain and all Gripper as new.

Year of construction: 2008, Condition: used, Die-cutter Bobst VisionCut 106 LE Year: 2008 With lateral register Description - Elevation - Platform for elevated machine - Bernoulli braking device at stripping - Braking brush at delivery - Side joggers at delivery We offer this machine cleaned, repainted and reconditioned in our factory in the Netherlands. Of course, this machine will be delivered with a new platform as well, although it does not show in the pictures yet. Nwjljulkbyshccqted Availability: approx. 4 months after order.

Condition: used, Year of construction: 1996, The Bobst Flexo 1600, manufactured in 1996, is currently in production and located in Germany. This machine handles formats ranging from a minimum of 600 x 520 mm to a maximum of 1600 x 1100 mm. It is equipped with five color stations featuring vacuum sections, a UV dryer, an automatic vacuum conveyor, and a Serco-Feeder MKBF 50x65 C1600C. Additionally, it includes four lower printing units with chambered doctor blades, a vacuum transport unit at the delivery after the five colors, an automatic washing system, and a maximum speed of up to 6,750 sheets per hour. The machine features automatic adjustments with memory and job retrieval, and it meets EC-certified electrical standards. It also includes an IR dryer. The delivery terms are FCA. Nwjlhccjvfxvvoqtsd Format: max 1600 x 1100 mm. min. 600 x 520 mm Equipment: maximum speed up to 6750 sheets per hour Serco feeder MKBF 50x65 C1600C automatic vacuum feeder Bobst Flexo 160 with 5 printing units with vacuum transports sections 5 colors with vacuum sections new electrical part compliant with EC certified EC standards automatic adjustments with memories and job recall 4 bottom printing units with chamber doctor blades automatic washing system UV dryer IR dryer 5 Colors vacuum transport unit at the delivery after the 5-colors

Condition: used, Refurbished by Celmacch year 1992 Sun Feeder New Sheet Counter Sheet Maxi size : 1575 x 1070mm Cut Maxi size : 1560×1040 Sheet Min size : 600 x 400mm Force : 250 T. Max speed: 3.500 sheets/h. Thickness maxi corrugated carton : 9,5mm Nolhcjruwplscqtswd Dimension : 7.60m x 2,40m x 2,65 h (without reels 2,40)

Condition: like new (used), Year of construction: 2007, Introduction of vacuum belts Straight line Automatic lock bottom 4/6 corners HHS gluing unit Extended folding section Pneumatic piston joggers at the exit Nelhcjv Nywcjcqtswd Pressure belt Bobst CUBE Maximum format 1450 mm Corrugated cardboard thickness up to 15 mm. 300 gr. flat cardboard.

Condition: good (used), Year of construction: 1991, Bobst SPO1600 + prefeeder Year: 1991 Max.Size: 1100x1600 mm Min.Size: 520x600 mm MaxSpeed: 6000 Sh/h Max.Cutting force: 400 t Centerline Quicklock system in Production Njlhsv Ah Hfoccqtewd

Condition: good (used), Year of construction: 1987, Functionality: fully functional, Bobst SP 142 ER Year 1987 Max. Size: 1020x1420 mm Min. size: 700x520 mm Nwjlhcovhcgqjcqtod Max. Speed: 6000 Sh/h Max. Cutting force: 600 T Centerline Micrometer setting in production

Year of construction: 1970, Condition: good (used), Bobst SP 1650 E Max.Size: 1150 x 1650 mm Min.Size: 570 x 850 mm Nslhccsht Rn Ieqtswd Max.Speed: 4500 Sh/h Year 1970 In good production condition.

Year of construction: 1978, Condition: excellent (used), Bobst SP 142 E year: 1978 Max. Speed: 6500 sh/h Njlol Rbyqjhccqtswd Max. Size: 1020 x 1420 mm Min. Size: 500 x 700 mm

Year of construction: 1980, Condition: good (used), Functionality: fully functional, Bobst SP 102-E Year 1980 Machine was upgraded in 1990 Max.Size: 1020x720 mm Nwjlhevx A Ehoccqted Min.Size: 400x520 mm MaxSpeed: 7500 Sh/h Max.Cutting force: 250 T Centerline in Production.

Year of construction: 1970, Condition: good (used), Bobst SP 900 Type: APM Year: 1970 Max. size: 900 x 630 mm Min. size: 300 x 200 mm Nslhcstq Ey Uscqtewd Max. speed: 3600 Sh/h

Year of construction: 1989, operating hours: 19,220 h, Condition: good (used), Bobst SP 102 CER Year 1989 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. cutting force: 250T Running hours: 19200 h Paper: min. 80 gr/sqm Cardboard: max. 2000 gr/sqm Centerline Njlhccovk Ur Rsqtewd Feeder non-stop Autom. Non-Stop with Sheet inserter Maindrive Converted to frequency Converter Side guide OS + BS Vacuum compensation plate with micro adjustment Quick lock system

Condition: good (used), Year of construction: 1987, Functionality: fully functional, Bobst Domino 90 Year: 1987 With pre-breaker - Longitudinal seam only - Straightline only. incl. hhs-Gluesystem Max. speed: 450 m/min. Nwolotzydvshccqted