Used Bobst 102 E for sale (49)

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Codezmyfdjpfx Aktori Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER Credpfx Akezuwazjtsi We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Availability: Immediate (the table is secured and ready for loading).

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Cedpfx Aewgz Rksktori Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Crsdpfou Snwmox Aktei Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Year of construction: 1971, condition: excellent (used), Bobst Autoplatine 126 E Year: 1977 Crjds Aa Ivbepfx Aktoi Maximum speed: 5500 sheets/hour Maximum size: 1260 x 920 mm Minimum size: 350 x 500 mm Maximum force: 500 tons Die-cutting In production Available immediately

Year of construction: 2019, operating hours: 7,400 h, condition: excellent (used), Pwer Register 2 New SMart Feedeer 2 Elevated 400 mm. Format max. 76x106 cm Format min. 35x40 Max speed 8,000 f/h Minimum 70 g/m2 paper Cjdpfx As Ad I Ulsktjri Cardstock max 2,000 g/m2 Corrugated cardboard up to 4 mm. Hours worked 7,300 Bernoulli device Available Febr. - March 2027

Year of construction: 1989, operating hours: 55,929 h, condition: used, functionality: fully functional, Manufacturer: BOBST SA, Switzerland Model: AUTOPLATINE SP 142-E Year of Manufacture: 1989 Machine Type: Automatic Die-Cutting Machine Crsdpsz Tzviofx Aktoi Technical Specifications Operating Hours: 55929 h Non Stop sheet inserter Centerline System: Yes Delivery (automatic) Maximum Sheet Size: 1,020 × 1,420 mm Minimum Sheet Size: 500 × 700 mm Maximum Production Speed: 6500 sheets/hour Maximum Die-Cutting Force: 600 tons (6 MN) Suitable Materials Cardboard: 80–2,000 g/m² Corrugated Board: F, E, R, B, FF, FE, FB and EE flute types

Year of construction: 1981, condition: excellent (used), Bobst Autoplatine 142 E Year: 1981 Maximum speed: 6,500 sheets/hour Maximum size: 1420 x 1020 mm Minimum size: 700 x 500 mm Maximum force: 600 tons Cjdo Aa Ivnjpfx Aktori Die-cutting

Year of construction: 1989, condition: excellent (used), Bobst Autoplatine 142 E Year: 1989 Max. speed: 6500 sheets/hour Max. size: 1420 x 1020 mm Min. size: 700 x 500 mm Max. force: 600 tons Csdpfxs Aa Ivzj Akteri Stripping function Currently in production Available immediately

Year of construction: 1981, condition: good (used), Typical specifications for the SP 142 ER model: • Maximum sheet size: 1,420 × 1,020 mm • Minimum sheet size: approx. 700 × 500 mm • Maximum production speed: approx. 6,000 sheets/hour • Maximum cutting pressure: approx. 600 tons • Automatic die-cutting • Stripping capability • Blank separation, depending on the installed configuration Crodps Agwu Eofx Aktoi • Suitable for solid board and corrugated materials

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE Codpfexl Talex Akteri - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Codpfjwathhox Aktjri Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Condition: good (used), Year of construction: 1980, functionality: fully functional, lateral stop: 1,420 mm, cutting width (max.): 1,420 mm, Bobst SP 142 ER from 1980 for sale – reason for sale: a replacement investment has been made. The machine can be inspected during operation. Dismantling and transport are the responsibility of the buyer. Crjde Afbxmopfx Aktei

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Crjdpfxo Afv Sze Aktsi Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Waste Stripping Station System with 3 pull-out frames 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Crodps Afwrvjfx Aktei Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Lower pull-out frame Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Year of construction: 1981, condition: good (used), functionality: fully functional, machine/vehicle number: 057401406, Bobst Autoplatine 142 ER Year: 1981 DOUBLE SORTİNG CONTİNOUS CUTTİNG OPTİON Cedpfx Ao Ahw Sqjktsri Maximum speed: 6,500 sheets/hour Maximum size: 1420 x 1020 mm Minimum size: 700 x 500 mm Maximum force: 600 tons Die-cutting YOU CAN ASK MORE DETAİLS AND PHOTOS .

Condition: used, Year of construction: 1997, Format: 1300 x 920 mm Equipment: Maximum die-cutting size with front waste: 1,300 x 905 mm Maximum die-cutting size without front waste: 1,300 x 915 mm Maximum embossing size: 1,300 x 900 mm Paper: approximately 80???90 g/qm2 and above Solid board: up to approximately 2,000 g/qm2 Corrugated board: up to approximately 4 mm Equipment: Operating platform Machine raised by approximately 650 mm Removable platform section at the feeder Recently installed asynchronous main motor Manual non-stop feeder pallet Pile table with manual lateral correction during production Adjustable suction unit Automatic feeder-head adjustment Double-sheet detection Sheet down-holder for guiding sheets to the front lays Upper frame with manual lifting device Csdsz Hnayspfx Aktsri Upper transport equipment for paper and cardboard Die-cutting, pressing/creasing and embossing, separately or simultaneously Oil conditioner for maintaining the correct operating temperature Automatic removal of internal and marginal waste Condition and availability

Year of construction: 1998, condition: used, functionality: fully functional, Automatic die cutter for paper and carton converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is equipped with an automatic waste stripping station and a pile delivery with manual non-stop rack and front waste removal device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping station. Equipment ###Machine Platform with safety barrier Crsdpe Afvruefx Aktoi Machine elevated by 415 mm, including platform elevation Centerline system for off-press tool preparation, quick registration, and fast setting of adjustable elements Electrical cabinet with air conditioner Light beam indicator for machine state Sheet passage control unit with infrared cells 4 auxiliary control panels C.U.B.E. centralized microprocessor control unit with LCD display and keyboard for sheet counting, cutting force with adjustable overload limiter, speed setting, and synoptic status display Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at stripping station Three-phase asynchronous main motor with frequency converter control ###Feeder Floating pallet tray with manual handle for lateral adjustment during production Suction unit with multiple adjustments Pile height control with front photocell Side blowers laterally adjustable with Centerline marks Automatic vertical compensation of the suction head Manual non-stop device Sheet synchronization device adjustable during operation ###Feed Table Anti-static stainless steel plate Upper transport for paper, carton, and corrugated board up to 4 mm Upper frame with manual lifting device 4 fixed position lower feed belts 4 paired adjustable front lays Pull guide (OS) adjustable with Centerline marks Sheet presence control and double sheet detector Sheet synchronization device with manual adjustment, machine stopped ###Platen Press 3x upper chase with quick locking, fixed bottom plate Lower ground steel cutting plate, 5 mm Lower supporting plate of synthetic material, 22.5 mm Device for die-cutting without gripper margin Gripper bar reopening device Compensation plate, 4 mm ground steel Adjustable centerings for the lower supporting plate, ±0.9 mm ###Waste Stripping Station 2x upper pull-out frame 2x lower pull-out frame Central quick lock pull-out frame ###Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size: (with gripper margin) 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,400 mm (non-stop 1,100 mm), delivery 1,120 mm Max Pallet Size: 1,200 x 800 mm ###Compressed Air min. 6 bar; without a central supply, a compressor of 7.5 m³/h with a 110 l tank is required ###Net Weight 15,000 kg ###Electricity Main motor 11 kW, total connected load max. 25 kVA Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section Crodpjyz Adnefx Aktsi 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Credeyrnhxjpfx Aktji Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm Codpfx Akjw E Iumotjri • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) Crodpfxjv Tzhqs Aktei • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Year of construction: 2003, operating hours: 50,000 h, condition: excellent (used), functionality: fully functional, Item for sale: Bobst Sprintera 106-PER. Fully documented! Copies of invoices for service and overhauls are all available! Completely overhauled power register! Linear drives new Inverters new Complete pallet transport/machine logistics system new Bobst Sprintera 106-PER Cedpfx Aszp Hcujktjri Year of manufacture: 2003 Max. format: 760 x 1060 mm Min. format: 400 x 350 mm Max. speed: 12,000 sheets/hour Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop delivery Quick-locking system Pricing according to customer requirements. Please do not hesitate to contact us if you have any further questions.

Year of construction: 1990, operating hours: 21,834 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 059700605, Bobst SP 142-CER from 1990 for sale – Reason for sale: replacement investment made. The machine can be inspected in production. Dismantling and transport at buyer's expense. Crjdpfx Akoy Htxgotoi

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Credpfevyn Ttex Aktsi Speed for die cutting 7500 per hour max