Used Crank for sale (572)

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left Fpodexn Eckjpfx Al Ujn * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: used, maximum load weight: 31,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 06/2026, loading space volume: 30 m³, Year of construction: 2024, Equipment: ABS, 3-axle LoF-SANH SCHWARTE-JANSKY "SLURRY TAXI" Stainless Steel (V2A) Slurry Tanker Semi-Trailer, 30,000 liters First registration Fpsdpfx Ajy U A R Ujl Uon VOGELSANG rotary lobe pump Type VA 186-260Q, max. capacity 6,000 liters/min, exchangeable pump housing liners Automatic pump cut-off, tank fill level easily adjustable by the driver Rinse line DN150, with 3 outlets (in front of each baffle and at the front wall) 2x baffle floors 3 domed covers, DN500 Suction funnel, 8" diameter, rear top mounted Stainless steel hose trays, left and right, approx. 6,000 mm long Swivel outlet at rear, 6" with Perrot coupling Product hose purge device All valves pneumatically operated including monitoring function Valve control via RADIO REMOTE CONTROL Complete pipework made of V2A stainless steel SAF off-road axles with drum brakes 1st axle LIFT AXLE 3rd axle steering axle WABCO Trailer EBS with RSS stability program Tires: 6x 560/60 R 22.5 Curb weight (ready to drive): approx. 7,700 kg Fifth-wheel height: approx. 1,350 mm JOST crank landing legs Stainless steel toolbox left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING – also available immediately in full-service rental from us-----

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Technical Data: - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg Fsdew Id Ndepfx Al Uepn - Included: - Machine vice - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting

Condition: ready for operation (used), Year of construction: 1979, machine/vehicle number: 20945, Drill diameter: 28/35 mm Spindle mount: MK 3 Overhang: 293 mm Table size: 400 x 400 mm Table can be swiveled on a round column and its height can be adjusted using a hand crank and rack and pinion mechanism. Large distance between table and drill chuck: 630 mm Chuck travel: 180 mm Fsdpfxjzh H I Us Al Uopn Spindle speeds, infinitely adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space required: 600 x 920 x 1880 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm Fodsb A H Rbjpfx Al Ujpn -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 Fpjdpfx Aloh Eibas Uon WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Fpodpfjh Ha Ipex Al Uen Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: cranked clamp, 2 pieces -Clamping iron: 160/60/H55 mm Fpedpfxsuqf Tze Al Uen -Groove: 55 x 23 mm -Slot nut: slot width 21/35 mm -Price/Delivery: complete -Transport dimensions: 160/120/H150 mm -Total weight: 4.9 kg

Condition: new, Year of construction: 2026, motorized beading machine Prinzing SME50 with swiveling upper shaft operation via foot pedal Speed steplessly adjustable via foot pedal 2 speed levels 0-8 m/min or 0-19 m/min Feed via hand crank complete with 9 pairs of standard rollers (V2/V4/V6/S6/BC/F6/BB/SK5/E20) hardened stop plate Fodpfxsmn S D No Al Uopn plate thickness 1,25 mm roller center distance 50 mm throat 200 mm

Condition: good (used), Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm Fpodpfoiwuyrox Al Ujn -Weight: approx. 161 kg

Condition: good (used), Drawbar, drawbar, overrun brake -Drawbar: height-adjustable, cranked, with overrun brake -Support load: 75 kg -permissible total weight: 900 kg -Number: 14x drawbar available -Price: per piece -Total length 2500 mm -Transport dimensions: 1200/800/H450 mm -Own weight: 50 kg Fsdpfx Alognnbke Uepn -Transport weight 76 kg

Condition: used, thickness of jaw 250 mm height of jaw 80 mm clamping width 340 mm Fpsdjtqqpkspfx Al Usn = hydr. machine vice (pos.1) - with hand crank and 3 clamping shoes -

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles Fpedpfx Alsvcuddo Uen * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears Fpsdpfsdzd Husx Al Usn -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 726 kg, maximum load weight: 1,974 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper with electric tipping system NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping system 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backward Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -35cm side panels -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bars -High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration document €250 net Pictures are examples and may show optional accessories that incur additional costs. Haven't found the right trailer yet? Fjdpfjzu Sgvox Al Uopn We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come directly to us!

Condition: used, Year of construction: 2021, Used metal stamping press ALP-25J (25T, 2021) for sale. Condition: used, good condition. Can be tested. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 Compact and reliable mechanical eccentric stamping press designed for forming, cutting, blanking, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 65 mm Stroke frequency: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Slider working area: 560 × 370 mm Table (bolster) area: 250 × 220 mm Country of origin: China Weight: 800 kg Application: The ALP-25J press is suitable for: stamping, cutting, bending, and forming metal parts; Fsdpfozktuajx Al Ujpn small pressing operations in the production of tools, metal structures, and automotive parts; working with thin and medium-thickness sheet metal. If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 1995, functionality: fully functional, JOSTING EFS 2300 L is a heavy-duty single-knife veneer guillotine designed for accurate cutting of veneer sheets and veneer packs. The machine has been modernized and upgraded with an electronic positioning and control system, improving cutting accuracy, repeatability and ease of operation. Manufacturer: JOSTING Model: EFS 2300 L Machine type: Veneer Jointing Guillotine / Veneer Pack Cutting Machine Cutting length: 2,300 mm Maximum insertion height: 80 mm Parallel fence range: approx. 20–720 mm* Pressure bar: Hydraulic cylinder with two pressure stages Cutter bar drive: Brake motor, gearbox and crank drive Parallel fence: Motor-driven positioning system Connected load: approx. 7.7 kW Machine footprint with parallel fence: approx. 3,640 × 1,700 mm Machine height: approx. 1,700 mm Net weight: approx. 3,000 kg Modernization INCLUDES: Digital LCD display Electronic measurement display in millimetres Numeric keypad for direct entry of required cutting dimensions Automatic positioning of the parallel back fence Fsdjzu Au Dopfx Al Uopn Programmable cutting dimensions Cutting sequence / step programming functions Electronic adjustment and positioning controls Start/Stop control directly from the operator panel Manual fine-adjustment controls Centralized operator interface combining machine and positioning functions

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 34 Code L4BH, for chemicals Fpodpex Rtafsfx Al Uen First registration 05/2023 German registration, from first owner Ø Unladen weight approx. 7,580 kg Ø Stainless steel chassis, highly polished Ø BPW axles with large disc brakes, 430 mm Ø 1st axle: LIFT AXLE Ø Crank-operated support legs, steel, for full load Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims ALCOA Dura-Bright, high-gloss Ø WABCO trailer EBS with RSS anti-roll protection Ø Tank: 34,000 liters, stainless steel 1.4571 AISI 316 Ti Ø Operating pressure: 3.0 bar / Test pressure: 4.0 bar Ø Insulation: 100 mm glass wool Ø 1 compartment with 4 bulkheads Ø 5 manholes, 3x DN500 and 2x DN350 Ø 1 vent valve, Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on the right side, DN 50, with TW 50 connection at the front right Ø Heating preparation, 4-channel hot water Ø 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling Ø 1 purge device Ø Pneumatic bottom valve Ø Hoses on the left and right, DN 150, approx. 6 m long RENTING is the new BUYING, also available with us in a full-service rental arrangement.

Condition: used, Year of construction: 1982, machine/vehicle number: 005-5216, Lg.No. 24586 Technical data: - max. working width 1030 mm - max. material thickness 3 mm - bending angle approx. 0 - 135 ° Fpodpfsv Hc A Nex Al Uon - lockable with end stop - upper beam is operated with a hand crank on the side - max. upper beam stroke 120 mm - max. bending beam adjustment 45 mm - bending process is supported by eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Fjdpfowrxqxox Al Uspn Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: ready for operation (used), Bench drill / ALZMETALL AB 40 ST -Drilling capacity in steel approx. 50mm -Threading capacity max. M30 -Tool holder MK 4 -Spindle stroke approx. 160mm -Automatic feed rate 0.1-0.2-0.3-0.4mm/rev -Overhang approx. 300mm -Continuously variable speed adjustment (variator) -Right/left rotation -Height-adjustable work table via hand crank -Work table size approx. 740x460mm -Motor power approx. 3 kW Dimensions: L x W x H 1.2 x 0.8 x 2.2 meters / Weight approx. 1200 kg Fjdpfx Alezm Tb Ej Ujpn Errors and omissions excepted.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Fliegl 45 ft Container Chassis Tailor-Made Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized to customer specifications. Chassis High-strength fine-grain steel welded chassis Fifth wheel with replaceable 2" kingpin and two kingpin positions Container locking system for: Rear extension retracted: 1 × 20 ft container (flush with rear, reduced kingpin load) Rear extension – Position 1: 1 × 30 ft, 2 × 20 ft, or 1 × 40 ft container with gooseneck tunnel Rear extension – Position 2: 1 × 45 ft container with gooseneck tunnel and rear overhang No rear height adjustment and no folding center supports; containers without a gooseneck tunnel cannot be transported Front locking adapter for securing containers without a tunnel from below, including storage bracket Roller-mounted rear extension with manual crank 24 t two-speed landing gear, single-side operation Two wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-aligned axle and suspension system for reduced tire wear and lower fuel consumption Offset axle spacing for combined transport (GCW up to 44 t) Air suspension Automatic lift axle on the 1st axle with forced lowering and traction aid (activated by braking three times). Traction aid operates up to 30% axle overload and a maximum speed of 25 km/h. Braking System Dual-line pneumatic braking system Color-coded air lines for easier servicing Spring parking brake Two interchangeable coupling heads at the front (without connecting hoses) Electronic Braking System (EBS) with front EBS socket (without connecting cable) Trailer may only be operated with towing vehicles supporting ABS functionality Raise & lower valve Vehicle Stability System (RSS) Axle load monitoring via EBS CAN bus for display in the truck cab (truck preparation required; not a calibrated weighing system) Wheels & Tires 385/55 R22.5 tires, manufacturer's choice Steel wheels, factory silver Electrical System 24 V electrical system Multi-chamber lights with LED tail and brake lights Yellow LED side marker lights (On certain tractor units, diagnostic messages may occur although all lighting functions correctly.) Two white front position lights Two red/white rear outline marker lights Two 7-pin front sockets (without connecting cables) Operating Information When transporting a 45 ft container with a short tunnel, with or without the front extension, the maximum permitted kingpin-to-rear-end dimension and the legal overall vehicle combination length of 16,500 mm are exceeded. The rear underrun protection must be extended manually. A special permit in accordance with §70 StVZO is required. Fpjdozlkiwepfx Al Uen Registration & Approval Registration country: Germany DEKRA approval and inspection certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R48 contour markings (white on the sides, red at the rear) Finish Hot-dip galvanized chassis including passivation 15-year anti-corrosion warranty Landing legs with black coating

Condition: new, functionality: fully functional, empty load weight: 369 kg, maximum load weight: 1,131 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 401 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Unilader 400 C 1.5T NEW VEHICLE Internal dimensions: 401cm x 184cm Total weight: 1300 Kg Payload: 1131 Kg Braked single-axle low-loader 1500 Kg KNOTT axle with overrun brake, reversing aid, and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust and non-slip screen-printed plywood floor 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors Foldable license plate holder 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Aluminum side panels - Drive-over tailgate - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Coarse or fine mesh net - Spare wheel with holder More accessories available upon request! Images are for illustrative purposes and may show accessories that are subject to an additional charge. Plus vehicle registration document and freight to Gera: €150 net Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Fpjdpjzkrmhsfx Al Uen Specialist in axle repair, including for caravans. Wide range of rental trailers available. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to us.

Condition: new, functionality: fully functional, empty load weight: 379 kg, maximum load weight: 1,451 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 3,530 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Low-bed Trailer 350, 1.8T NEW VEHICLE Internal dimensions: 353cm x 184cm Total weight: 1800 kg Payload: 1421 kg Braked, single-axle low-bed trailer 1800 kg AL-KO axle with overrun brake, automatic reversing function and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust and non-slip screen-printed plywood floor 13-pole electrical system Plastic mudguards Support wheel Fodjztc Hwepfx Al Uepn 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light, NSL (no-stopping light) and triangular reflectors 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Coarse or fine mesh net - Spare wheel with bracket Further accessories available on request! Images are for illustrative purposes only and may show optional accessories that incur an extra charge. Plus vehicle registration document and freight to Gera: €175 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: ready for operation (used), Year of construction: 2001, Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, torque converter: single-stage, transmission: Volvo HT 220 automatic powershift transmission with countershaft and single-lever control, shifting system: Volvo Automatic Power Shift Generation II (APS II) with driving mode selector, axles: Volvo axles with full-floating axle shafts and planetary hub reduction, cast steel axle housings, rigid front axle, oscillating rear axle, 100% differential lock on the front axle, transmission type: Volvo HT 220, torque multiplication: 2.27:1, braking system: wet disc brakes, fully enclosed, oil-cooled, externally mounted on the axles. An on-site inspection is possible. Fpedpfxjzadmaj Al Uon