Crankshaft milling machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
workpiece length 600 mm Fodftmi working lenght 500 mm max. lift radius 48 mm 80 mm max. working travel - vise left hand side 670 mm drum internal dia. 542 mm clamping chuck diameter 220 mm portal max. working travel x- axis 120 mm milling head changing travel 582 mm rapid traverse 10000 mm/sec feed 8000 mm/min milling slide working travel y+ axis 126 mm milling slide working travel y- axis 123 mm max. stroke milling slide 2 96 mm total power requirement 100,00 kW weight of the machine ca. 27,0... more
5
workpiece length:800 mm swing dia.:450 mm clamping length:XXX mm :: workpiece swing dia.:200 mm clamping diameter:55 - 110 mm journal diameter :35 - 80 mm working area:: z-axis:660 mm w-axis:625 mm x-axis:180 mm U-axis:180 mm c-axis:360 ° Steady Rest ( Q-axis ):890 mm workpiece diameter:700 mm Tootl Taper DIN 55026:8 DIN 55026 clamping chuck diameter:180 mm Bcrx7ds0aw feed z-/w-axis:0 - 40 m/min. feed: z-/u-axis:0 - 40 m/min. feed Q-axis:0 - 24 m/min. feeds C-axis:0 60 1/min milling drive m... more
6
Travel: X 5750, Y 790, Z 360 Laf2qhsx Table: 3000 x 800m, min./max. Distance spindle nose - table: 800 / 1100mm Max. Workpiece weight: 15000kg CNC Heidenhain TNC426CB, retrofitted 1997 Feed motors: Siemens AC, rapid traverse 6m/min Milling motor: Siemens AC 15kW; Spindle Ø in the front bearing: 130mm quill-Ø: 210mm, 18 manually shiftable gear stages, 18 speeds from 20-1600 rpm hydraulic tool clamping taper 50 DIN 69871 Weight: 32000kg Heidenhain linear scales more
1

DOWEL MILLING MACHINE HAWKER 2000

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Mufejo HAWKER 2000 Dowell Milling Machine featuring auto feed. -- Specifications: 1/2" - 2" Dia. cap., 16" min. stock length, 15 HP - 3,600 RPM cutterhead motor; cutterhead speed 3,800 & 5,000 RPM. -- Equipped with: (2) Sets of powered V-infeed rollers with independently adjustable tension & (1) set of horizontal (interior round radius) outfeed rollers, (1) top holddown V-groove roll in front of powered infeed rolls centers the material, (1) pair of i... more
2

Horizontal Borers KEARNS RICHARDS SH75 Horizontal Boring/Facing/Milling Machine. 75mm Spindle

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 7076 Table size 1000mm x 1000mm Table Longitudinal traverse (Y) 1000mm Table Cross traverse (X) 1250mm Table Swivels 360 Degrees Head stock vertical traverse (Z) 1000mm Input 400/440/3/50 ac 7.5 kW Spindle & facing speeds 5.6-280 rpm Spindle speeds 180-1120 rpm Feed rate 0.76mm-3800mm per Minute Facing head diameter 500mm Facing head slide cross traverse 160mm Spindle traverse 500mm Spindle diameter 75mm Spindle Taper 40 int Equipment Spindle Support & Vertical Milling Head Bciey303s... more
4

Floor type Anayak Milling machine ANAYAK HVM-3300 - 2001HVM-3300

Burgos, SpainSpain dealership location
6043 km
2001
ready for operation (used)
Retrofitted: 2018 Numerical control: FANUC 21iM Technical features G9akgil9q Dimensions Table dimensions: 3600 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2700 mm Y axis traverse: 1200 mm Z axis traverse: 1460 mm Milling head Head type: Multiangular ... more
51

Milling machines Waldrich Siegen PF-F-150

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Technical data Bch908lwzs X Achse12000 mm Y - Achse7300 mm Z - Achse3000 mm W - Achse4000 mm Mobile stand, bed / Portal / LateralPORTAL MILLING MACHINE SteuerungsartSiemens Sinumrik 840 D 6 axis Table size / Größe12000 x 4730 mm Table burden in kG250000 ... more
5

Table Type Boring and Milling Machine WOTAN B 80 T

Mönchengladbach, GermanyGermany dealership location
6371 km
used
spindle diameter:80 mm x-travel:1000 mm y-travel:900 mm z-axis table approx.:1120 quill stroke:710 mm spindle taper MT:5 Table area:1060 x 980 mm spindle turning speed range:6 - 710 U/min total power requirement:15 kW weight of the machine ca.:9 t dimensions of the machine ca.:4 x 2,6 x 2,6 m Gvyibfkgc The machine was in a training school and generally overhauled in 2008! 5-axes digital readout make HEIDENHAIN diverse clamping tools and toolholders more
4
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Dovetail 144 to 184 mm 30 mm high Hikt0is3o Drawing on the photographs Dimensions 270/130/H195 mm Weight 12 kg more
1

DOWEL MILLING MACHINE HAWKER 3000

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bn82oteh HAWKER 3000 Dowell Milling Machine. Specifications: 1-1/4" - 3-1/4" Dia. cap., 18" min. stock length, 25 HP cutterhead motor. -- Equipped with: (2) Sets of powered V-infeed rollers with independently adjustable tension & (1) set of powered outfeed rollers, (1) set of horizontal outfeed rollers; variable feed speed 40 - 150 FPM, 5 HP feed motor. -- Push button magnetic switch with automatic cutout for overload protection. -- Complete with: ... more


crankshaft...
daily

New machines via email!

Stay updated!
6

CNC Millers BOKO WF3/12 4 axis CNC Milling Machine with Heidenhain TNC 415 control

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Control Heidenhain TNC 415 Table Size 1600 mm x 1200 mm Table Left/Right 1600 mm x axis Table In/Out 1150 mm y axis table swivels 360 degrees c axis Vertical Travel (head) 900 mm z axis Feed Rate variable Input 400/3/50 11 kw Speeds 35.5 - 1800 rpm Spindle Taper 50 int Bciegxdfmh Spindle Rise & Fall 300 mm Head Swivels 90 degrees - 0 - 90 degrees Equipped with off- set milling head and coolant. Length 14' Width 13' 8" Height 12' Nett Weight Actual. 15,820 Kgs / 15.57 Tons more
6

Bed type Anayak Milling machine ANAYAK VH-2200 - 1998VH 2200

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2200 x 600 mm Bcieafjjtr Traverses of axis X axis traverse: 2000 mm Y axis traverse: 900 mm Z axis traverse: 800 / 700 mm Milling head Head type: Automatic 2 positions (Horizontal/Vertical) Tool... more
17

Milling machines Deckel Maho DMU 50 M

Babberich, NetherlandsNetherlands dealership location
6320 km
1998
ready for operation (used)
Technical data Bch83ictkl X Achse500 mm Y - Achse400 mm Z - Achse400 mm Mobile stand, bed / LateralVMC / Portal SteuerungsartHeidenhain TNC 124 Table size / Größe700 x 500 mm Table burden in kG200 kg WerkzeugaufnahmeSk40 Spindl... more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 total power requirement: kW weight of the machine ca.:12 t Tephbfcmc dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more
4
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Licbv Dovetail 74 to 90 mm 15 mm high Drawing on the photographs Dimensions 130/105/H50 mm Weight 2 kg more
4
x-travel 310 mm y-travel 170 mm z-travel 340 mm spindle head ISO 40 table-size 215 x 600 mm feeds 16, von 9-450 mm/min spindle taper SK 40 spindle turning speed range 50 - 2500 U/min Drive 1,4 / 2,3 kW switchgear cabinet weight of the machine ca. 900 kg dimensions of the machine ca. 1,1 x 1,1 x 1,3 m Srbprw Condition: ready for operation Angle table ( fixed ) Machinefeets 4 Vertical milling head with quill adjustment Electric 380 Volt Construction same as Deckel FP 1. Machine d... more
5

Milling Machine - Vertical UNITECH FSS 400

Monheim, GermanyGermany dealership location
6403 km
2004
used
x-travel 1.120 mm y-travel 345 mm z-travel 400 mm Control Heidenhain TNC124 workpiece weight max. 1.500 kg surface area 400 x 1.600 mm milling-spindle dia. in forward position 100 mm tool diameter max. 315 mm max. torque 1.850 Nm turning speed range 18 steps (step 1,25) turning speed range 28 - 2.240 U/min axial adjustment sleeve 90 mm Nbrar swivelling range +/- 45 ° feed stepless rapid traverse y/x/z axis 3.150 / 3.150 / 1.000 creep feed (x/y/z) 50 / 50 / 16 mm/min. weight of the machin... more
1

Bed type Correa Milling machine CORREA A30/50 - 6300905A30/50

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN CNC TNC-426-PB Technical features Dimensions Table dimensions: 5000 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm   ... more
23

Milling machines Deckel Maho DMC 100 V

Babberich, NetherlandsNetherlands dealership location
6320 km
1998
ready for operation (used)
Technical data X Achse1000 mm Y - Achse800 mm Z - Achse700 mm Milling bed mobile stand / Portal / LateralPortal SteuerungsartDialog 112 Table size / Größe1250 x 800 mm Table burden in kG1250 kg WerkzeugaufnahmeSk 40 Spindle10 kW... more
1
x-travel:0410 mm y-travel:350 mm z-travel:450 mm table-size:650x375 mm tool adaptor:SK 40 Jibr20j more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Performance 4,5 kW 4700 rpm at 80 Hz Voltage Y 400 volts Xwhxs8a Recording shaft Ø 32 mm Tool dimensions 645/235/H150 mm Weight 55 kg more
5
x-travel 1010 mm y-travel 310 mm z-travel 440 mm Crfbbrb0 table surface area 1600 x 450 mm speeds 28 - 2240 U/min control Grundig Manual Plus spindle taper ISO 50 weight of the machine ca. 5 t dimensions of the machine ca. 3,5 x 2,3 x 2,4 m Electric 380 Volt Cooling equipment Div. receivings SK 50 3-axes CNC path control MANUAL PLUS new in 1997. The machine has run until last, but the control cabinet with its many individual cables is now no longer connected. That is why we are sellin... more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm rapid traverse:5 m/min spindle turning speed range:25 - 3150 U/min Uwwj7xe3s spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
10

Bed type Correa CORREA milling machine DIANA-35 - 624057Diana 35

Burgos, SpainSpain dealership location
6043 km
2008
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 3800 x 900 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 3500 Y axis traverse (mm): 1000 Z axis traverse (mm): 1000 Milling head Head type: 2,5º Auto ... more
24

Milling machines Hermle Germany C 30 U Dynamic

Babberich, NetherlandsNetherlands dealership location
6320 km
2011
ready for operation (used)
Technical data X Achse650 mm Y - Achse600 mm Z - Achse500 mm Bch3yjwqth SteuerungsartSiemens 840 d Table size / Größe630 mm Table burden in kG800 kg WerkzeugaufnahmeHSK 63 Speed range / Stufen28000 RPM Werkzeugwechsler75 (32 + ... more
5
spindle diameter:130 mm x-travel:3500 mm y-travel:2500 mm z-travel:1600 mm w-axis:800 mm Tool changer:60-fach turning speeds:3000 1/min M2pfd Table size:1800 x 2200 mm c-axis:360000 Position table load:20 t internal coolant system feed:30l/min 10 bar Operating platform:1500 vertical mm Operating Platform:575 horizontal Operating Platform:Tragfähigkeit/Load capacity 250 kg weight of the machine ca.:37 t total power requirement:82 kVA dimensions of the machine ca.:8 X 8 X 5 m Machine is partia... more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Jiaei0z Performance 3.7 kW 2890 rpm at 50 Hz Power 5,5 kW 5890 RPM @ 100 Hz Voltage 380 Volt Recording shaft Ø 35 mm Price per piece -2 x available Dimensions 630/250/H150 mm Weight 47 kg more
5
x-travel:8200 mm y-travel:1700 mm z-travel:1000 mm spindle drive:36 kW table-size:10.000 x 1060 mm spindle speed: U/min dimensions of the machine ca.: m automatic tool changer:40-fach 5 Position Auto Index Head:2 Stück/pc Jtdmai Used CNC traveling column milling machine Mecof with CS 1040 CNC with automatic. Head and extensive accessories: 2 piece automatic. heads 2 piece angle plates Tool changer 40 times CNC control HEIDENHAIN TNC 355 Q Further technical data and accessories, as defin... more
3

Lateral Milling Machine JOBS JOMACH 159

Mönchengladbach, GermanyGermany dealership location
6371 km
2005
used
x-travel:18000 mm y-travel:2500 mm z-travel:1250 mm spindle motor:31 kW spindle turning speed range:10 - 10000 U/min spindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90 c-axis:+/- 200 ° M27qp feeds:1 - 16000 mm/min rapid traverse::16 m/min weight of the machine ca.:72 t total power requirement:65 kW dimensions of the machine ca.:25,5 x 10,0 x 5,2 m Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS ... more
23

Bed type Correa Milling Machine CORREA CF22/25 - 9671102CF22/25

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2017 Numerical control: HEIDENHAIN TNC-410 Technical features Dimensions Bcid2dfj9a Table dimensions: 2500 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Univers... more
40

Milling machines COLGAR Milano FRAL 50 - 12.500

Babberich, NetherlandsNetherlands dealership location
6320 km
1991
ready for operation (used)
Technical data G8zhwkyhy X Achse12500 mm Y - Achse3000 mm Z - Achse1000 mm Column mobile stand, bed / LateralMoviong / Portal SteuerungsartHeidenHain TNC 426 WerkzeugaufnahmeISO 50 Spindle41 kW Speed range / Stufen1620 RPM Inte... more
6

Rotor Milling Machine HOLROYD 5 AC

Monheim, GermanyGermany dealership location
6405 km
1989
used
rotor dia 630 mm hobbing length 1700 mm clamping length 1740 mm milling cutter diameter 600 mm range of angles 0 - 60 ° hob turning speeds 20 - 120 U/min milling motor 45 kW milling slide travel 1270 mm spindle bore 203 x 838 mm max. workpiece diameter 630 mm pitch in mm 150 - 2500 mm milling width 216 mm boring diameter 100 mm total power requirement ca. 60 kW weight of the machine ca. 26,5 t dimensions of the machine ca. 5,3 x 6,25 m Auto Pump- Rotor Milling Machine This machine is designe... more
5
Milling machine, vertical milling machine, tool room milling machine Clamping table 1000 x 315 mm Traverse path x/Y/Z 720/220/430 mm Quill stroke Z 115 mm Spindle retainer SK40 -Drehzahlen from 32 up to 2800 RPM -Vorschub from 16 mm to 800 mm / min Vh3ksyh0e Dimensions 1850/1200/H1900 mm Weight 2000 kg more
6

Universal Milling Machine SHW UF 15

Remscheid, GermanyGermany dealership location
6419 km
1994
used
x-travel 800 mm Xo3hbplr y-travel 650 mm z-travel 550 mm more
15
Robust swing cutter by Martin T25 Pole-reversible drive motor 5 / 6 kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees electrically adjustable height max 150 mm, electrically adjustable Speed 1500, 3000, 4500, 6000 and 9000 RPM Suitable speed 1500 for grinding Ss0yr8 Spindle diameter 30 mm Comfort stop T226 with digital display for overall adjustment and spout jaw individually, as well as entering the cutter diameter (this is automatically calculates the depth... more
8

Bridge type Correa CORREA milling machine FP40/50FP40/50

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: Heidenhain TNC-530 Technical features Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Distance between columns: 2500 mm Milling head ... more
4

Milling machines Bullmak FU 321

Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical data X Achse1000 mm Btin0nia Y - Achse360 mm Z - Achse460 mm Table size / Größe1350 x 320 mm Table burden in kG250 kg WerkzeugaufnahmeISO 50 Performance spindle7. 5 kW Speed range / Stufen32 - 1600 rpm ... more
5
x-travel:400 mm y-travel:200 mm z-travel:400 mm tool taper:SK 40 Table dimensions:700 x 330 mm speeds:40 - 2000 U/min Nclll rapid traverse in x-y-z axis:1,2 m/min. quill stroke:60 mm feeds:8 - 400 mm/U total power requirement:2,2 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1,3 x 1,2 x 1,7 m more
5
Swivel spindle milling machine, spindle moulder, table milling machine Spindle height and angle -schwenkbar - 5°-45 ° Drive 4,3 kW Speed 3,200/4,700/7,000/10,000 rpm -Aigner milling stop Wemr82ahc Holz-her feed 3 rolls The shaft length 135 mm Spindle ø 30 mm -Max cutter Ø mm -Max slot tools ø mm Dimensions 1450/1150/H1550 mm Weight 915 kg more
4
x-travel:1000 mm y-travel:480 mm z-travel:480 mm table width:315 mm table length:1250 mm table - longitudinal motion:1000 mm :1250 x 315 mm turning speed range:28 - 1400 U/min Rcxijyiml power capacity:3,7/4,4 kW total power requirement:6 kW weight of the machine ca.:2800 kg 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214 more
6
Swivel milling machine T150 of SCM Drive motor 5,5 kW with automatic motor brake, new R/L barrel Swivel angle of - 10 to 45 degrees electrically adjustable with mechanical indication Height adjustment electrically adjustable with mechanical display, fine tuning with the tip button Speeds 3000, 4500, 6000, 7000, and 10000 RPM Spindle diameter 30 mm Shaper fence with fine adjustment SCM aluminium top JAWS with three Einlegelinealen 3-roll feed Haffner variable speed 3-24 m / min, R/L ro... more
15

Bridge type Correa CORREA milling machine FP30/40FP30/40

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2017/2018 G9aehq2o3 Numerical control: HEIDENHAIN TNC-426 PB Technical features Dimensions Table dimensions: 4000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3500 mm Y axis traverse: 2000 mm Distance between columns: 1740 mm Z axis traverse: 800 mm Milling head ... more
28

Milling machines Fehlmann PICOMAX 80 CNC 2/3

Babberich, NetherlandsNetherlands dealership location
6320 km
1992
ready for operation (used)
Technical data X Achse700 mm Y - Achse315 mm Z - Achse180 mm W - Achse495 mm SteuerungsartHeidenhain TNC 415 Table size / Größe1230 x 410 mm Table burden in kG250 kg WerkzeugaufnahmeSK 30 Spindle5 kW S... more
5

Universal Milling Machine ABENE VF 3

Dreieich, GermanyGermany dealership location
6568 km
used
x-travel 750 mm Qns0i8wot y-travel 250 mm z-travel 500 mm table-size 1200 x 260 mm spindle turning speed range 44 - 2000 U/min spindle taper ISO 40 feeds 8 - 750 mm/min coolant voltage 380 V total power requirement 4,5 kW weight of the machine ca. 1,35 t dimensions of the machine ca. 1,50 x 1,60 x 1,60 m - coolant equipment - machine lamp more
4
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er motor, spindle motor, milling motor -9.2 kw 2880 rpm at 50 Hz Recording wave Ø40 mm -Abmasse 690/305/H240 mm Whxpivkn0 Weight 92 kg more
12
DMG DMF 260/7 - 2010 BJ - approx. 6.500 h Very well maintained and fully featured machine with low hours. Bcssyapqcy Swivel Head, rotary table, Renishaw, ECC, etc. Make: Lid MAHO type: DMF 260 / 7 - 5-axis model year: 2010 Spindle hours: 6,500 h total power-on hours: 16.900 h (each estimated hours approx. on acquisition) Control: Sinumerik 840 D Shopmill Away: 2,600 mm way Y: 700 mm road Z: 700 mm Rapid traverse speed: 40 m / min Maximum spindle speed: 8,000 UDR/min spindl... more
7
X 580 mm Y axis 220 mm Z-axis 380 mm maximum work-piece weight 500 kg Clamping area 900 x 315 mm with 3 x 18 mm T-slot Spindle ISO 50 (spindle head n. DIN 2079) Quill stroke 120 mm The spindle swivel +/-90 ° Feed x and y axis 10-1,000 mm / min Feed Z-axis 4-400 mm / min Rapid traverse x and Y-axis 5000 mm / min Z-axis rapid traverse 2000 mm / min Spindle speeds: Pv9qbcu senkr. 48-2,100 rpm, 16 steps waager. 32-1,400 rpm, 16 steps Accessories: cooling plant, digital measuring sy... more
2

Bed type Correa Milling Machine CORREA A25/50 - 9252316A25/50

Burgos, SpainSpain dealership location
6043 km
1990
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 5000 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis Ti8vesdf X axis traverse (mm): 5000 Y axis traverse (mm): 1200 Z axis traverse (mm): 1000 Milling head Head type: ... more
35

Milling machines AXA Germany UPFZ 40

Babberich, NetherlandsNetherlands dealership location
6320 km
2001
ready for operation (used)
Technical data X Achse3800 mm Y - Achse1500 mm Bch7nfi0nn Z - Achse650 mm Milling bed mobile stand / Portal / LateralPortal SteuerungsartHeidenHain TNC 426 Table size / Größe3900 x 1500 mm WerkzeugaufnahmeSk 40 Power spindle20 / 100% or 30 / 40% kW ... more
4
workpiece length:900 mm swing dia.:150 mm clamping length:900 mm total power requirement:60 kVA 298vaknky weight of the machine ca.:15 t dimensions of the machine ca.:7,5 x 5 m more


crankshaft...
daily

New machines via email!

Stay updated!

to

to

Edit search
CRANKSHAFT MILLING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close