Used Crash Barriers for sale (807)

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Fodpfx Ameyzy T Ts Esgi Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,130 h, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, Submitting a bid entails an obligation for timely collection by 30.04.2026! Increased pressure to dispose - therefore reduced listing duration and lower minimum price! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Accuracy Minimum incremental movement: 0.001 mm Positional deviation: ± 0.1 mm Positional repeatability: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Pulse frequency: 0.01 - 10 kHz Gases: CO₂ / N₂ / He Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Operating hours Beam-on time: 21,660 h Laser-on time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar EQUIPMENT Cooling unit, logbook function Automatic pallet changer Gantry drive combined with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor technology Programmable power cycles Fjdpfx Amjyynuij Esgi Programmable cutting gas pressure regulation Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height and process control PCS (Process Control System) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray device for safe thick sheet processing Automatic shut-off Work area lighting Open PC-based control system Online assistance Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety Multi-beam light barriers Fully enclosed beam guidance with nitrogen flushing Monitoring system Multi-chamber extraction and compact dust collector Protective enclosure Machine system software

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 24,314 h, machine/vehicle number: A0230A1231, laser power: 6,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine by 30.04.2026! Due to increased selling pressure, the auction period has been shortened and the reserve price reduced! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Max. workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Positioning speed simultaneous (X+Y): 300 m/min Max. sheet thickness steel: 25 mm Max. sheet thickness stainless steel: 25 mm Sheet thickness aluminum: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control features: - Open PC-based control system - Online support - Diagnostic functions - Maintenance logbook - Technology data - Remote maintenance Safety equipment: - Multi-beam light barriers and guard enclosure - Fully enclosed beam path with nitrogen ventilation - Monitoring system - Multi-chamber extraction and compact dust collector Paint finish: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives ADDITIONAL EQUIPMENT - Cooling unit - Logbook function - Automatic pallet changer - Laser power control - HI-LAS high-pressure cutting - PMS plasma sensing - Programmable power cycles - Programmable cutting gas pressure regulation - Laser cutting head with 5" lens and 7.5" lens - Quick-change system for cutting heads Fjdpfx Aeyynu Nsm Eegi - Automatic sheet edge detection - APC capacitive height control and process monitoring - PCS (Process Control System) - Laser diode positioning - Automatic focus adjustment (AutoLas Plus) - Spraying device for safe thick sheet processing - Automatic shutdown - Work area lighting - Fully enclosed machine frame with integrated laser unit

Year of construction: 2026, condition: new, Complete and turnkey roll forming line for highway guardrail and road safety barrier production with multiple profile options. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This guardrail roll forming line is designed for the production of highway safety barriers and road protection systems with high precision and efficiency. The system provides a complete turnkey solution from coil feeding to finished product stacking. The line is engineered for continuous production, ensuring stable operation, consistent product quality and long-term reliability in demanding industrial environments. PRODUCTION CAPABILITY The system can produce various guardrail and support profiles: 2-Wave (W Beam) Guardrail 3-Wave Guardrail C Post Profile Sigma Profile Omega Profile Ray A & Ray B Profiles LINE CONFIGURATION The production line consists of: Hydraulic Decoiler (10 Ton capacity) Straightening Servo Feeder Hydraulic Press Stamping Die & Punching System Roll Forming Machine Flying Shear Cutting System Conveyor System Automatic Stacking System ENGINEERING FEATURES High precision roll forming system Servo-controlled feeding for accurate punching and forming Heavy-duty machine structure for continuous operation Modular and customizable line configuration Advanced automation system (PLC & HMI controlled) OPERATIONAL ADVANTAGES Turnkey production solution High production efficiency Consistent product quality Flexible profile production capability Short lead time compared to European manufacturers OPTIONAL CONFIGURATIONS Different profile designs and tooling options Automation and control system upgrades Integration with coil processing lines Custom engineering solutions APPLICATION AREAS Highway safety systems Road infrastructure projects Construction and public works Industrial barrier systems THE LINES THAT WE ARE EXPERIENCED: Guard Rail Production Lines C, U, Z, And Solar Panel Profile Production Line Logistic Warehouse Traverse Production Line Cable Tray Production Line Market Shelving Production Line Suspended Metal Ceiling Production Line Fsdpoyzfi Tefx Am Eogi Solar Framing And Racking Production Line Lighting Fixture Body And Lid Production Line Panel Radiator Top And Side Cover Production Line Metal Grid And Planks Production Line Metal Door And Door Frame Production Line PVC Window Gypsum Board Profile Production Line Agriculture And Animal Husbandry Practices Agricultural Vehicle Applications Painting Plant Panel Production Line Automotive Industry Applications Coil Punching Application Household Appliances Industry Applications

Condition: ready for operation (used), Year of construction: 2002, operating hours: 84,788 h, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. Fgodpfx Asy Hhwdom Eoi • Screw Diameter: 40 mm (Selected option) • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm • Max. Platen Distance: 800 mm • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Fodox S Uuyspfx Am Esgi Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Year of construction: 2026, condition: new, Customized roll forming production lines for standard and special steel profiles with turnkey automation solutions. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. Our custom roll forming lines are designed for serial production of sheet metal profiles directly from coil with high precision, repeatability and production efficiency. We manufacture complete lines according to customer profile drawings, production targets and automation requirements. From standard profiles to fully customized sections, Bosporas provides turnkey roll forming solutions including coil feeding, punching, forming, cutting, stacking and automation systems. The systems can be equipped with advanced technologies such as quick cassette change, flexible punching systems, automatic width adjustment and servo-controlled feeding solutions. ⚙️ PROFILE TYPES & INDUSTRIES We manufacture roll forming lines for a wide range of industries and applications, including: Highway Guardrail Production Lines Acoustic Noise Barrier Production Lines Solar Framing & Mounting Profiles C, U and Z Profiles Cable Tray & Cable Ladder Profiles Logistic Warehouse Traverse Profiles Market Shelving Systems Suspended Metal Ceiling Profiles Solar Framing & Mounting Profiles Lighting Fixture Body & Lid Profiles Panel Radiator Top & Side Covers Metal Grid & Industrial Profiles Metal Door & Door Frame Profiles PVC Window & Gypsum Board Profiles Vineyard / Orchard Posts Agricultural Equipment Components Automotive Industry Components Painting Plant Panel Profiles Household Appliance Components Coil Punching Applications Customized Special Profiles ⚙️ ENGINEERING FEATURES Custom machine design based on profile drawing Fsdpey Anxaefx Am Eogi High precision roll tooling design Servo-controlled feeding systems Quick cassette change options Automatic width adjustment options Flexible punching and perforation solutions Heavy-duty machine construction Modular design for future upgrades ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions High efficiency serial production from coil Consistent product quality Reduced labor and production costs Flexible solutions for different industries Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Construction industry Storage & logistics systems Solar energy sector Agriculture sector Automotive suppliers White goods industry Metal furniture systems Infrastructure projects General sheet metal manufacturing 🧩 OPTIONAL CONFIGURATIONS Fully customized profile design High-speed punching systems Automatic width adjustment Quick cassette change systems Special tooling packages Turnkey factory integration solutions

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter Fgjdjyz Dtdopfx Am Esi - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: good (used), Year of construction: 2013, machine/vehicle number: 82N1223, Paper cutting machine Polar 80 ECO, year of manufacture: 2013, machine number 82N1223, air table, light barriers, program control, in good condition, immediately available Fgsdox Aghwjpfx Am Esi

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Fgedpfswkttrsx Am Eei Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: good (used), functionality: fully functional, -KOM 3094- Offered here is a used Leuze MLD M light barrier. A total of five other light barriers of the same type are available. Fgjdpfxewmabbo Am Eji

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 71500 € 1351.35 € 4200 mm 1.5 mm 1 mm 2 mm Motorisch 5450 mm 2200 mm 1900 mm 5350 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Fodpjwirrqofx Am Ejgi Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 86300 € 1631.07 € 150 to 300 mm Fgodpfxjwiq Tys Am Eoi 950x650 mm 1200x750 mm 550 mm 100 mm/s 5,5 mm/s 165 mm/s 11 kW 2200 mm 2200 mm 3250 mm 8200 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6390312, Format (cm): 55 Equipment / Additional information: Fgjdpfxsxugv Ss Am Eoi Side tables, safety barriers, 1xreserve knife

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu Fjdpfsxwmikox Am Ejgi # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Fjdpfxowz Ukyj Am Eogi Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: used, Year of construction: 2012, Pallet film wrapper Additional title: Pallet film wrapper Max. capacity: 55 pal/h at max. 1600 mm height (standard height 2300 mm) Rotation speed max.: 20 rpm Power: 4 kW Current: 7,5 A Voltage: 400 V Frequency: 50 Hz Weight: 1500 kg Formats: Pallets with 1200 x 800 mm (max. 1200 x 1200 mm, min. 600 x 800 mm) Running direction: right -> left Operation / Control: On-site control box Material: Black steel painted Position: free-standing Base construction: Frame construction bolted to the floor Fjdpfxsw Tar Ss Am Ejgi Features: Satellite winder with integrated cover sheet dispenser, Powerstretch film pre-stretching system "S:C:S:P", clamping system "Genesis", protective grille and muting system, safety barriers, pneumatic hold-down device, 2 roller conveyors in the winding area

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 30,000 h, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, AVAILABLE FOR A SHORT TERM: TRUMPF TruLaser 3030 – 3.2 kW – Year 2007 with RotoLas! TECHNICAL DATA: Make: TRUMPF Type: TruLaser L 3030 – 3.2 kW Year of manufacture: 2007 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 12 mm Max. sheet thickness aluminum: 8 mm Operating hours: NC on 30,000 h (Oct. 2024) Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: TLF 2000 CO2 laser with high-frequency excitation, maintenance-free turbo radial blower, Reflector telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Maintenance-free three-phase servo motors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens Fedpfeu Afcbjx Am Ejgi - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS High-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensors - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shutdown - Workspace lighting - Sinumerik 840D control system: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - ToPs 100 lite workshop programming - Safety: multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TruFlow 3200 laser including lens monitoring sensors - PCS Process Control System - Preparation for LiftMaster - RotoLas pipe cutting system for cutting pipes and profiles

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Fsdpfx Amjxabt Ae Ejgi Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system Fgodpsxabvkefx Am Eoi - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: used, Year of construction: 2001, Combined de-capper for screw tops and crown caps. Combined unscrewer and uncorker. Equipped with 2 unscrewing and one uncorking hoods. The machine is operated with 2 hoods installed at the same time, which corresponds to 4 unscrewing/decorking heads. Velocity of the crate conveyor: 0,6 m/s. Capacity: 40000 bo/h Pneum. working pressure: 10 bar Power: 11 kW Current: 25 A Voltage: 230/400V, 24V control voltage Fgjdpfxjxbqg Ue Am Eji Frequency: 50 Hz Length: 2900 mm Width: 1260 mm Height: 2000 mm Formats: 0,5 l NRW, 0,5 l Euro, 0,33 l Steinie, screw caps and crown caps Operation / Control: Simatic S7 Features: 2 Hoods with 2 heads each for screw tops,1 hood with 2 heads for crown caps, crate transport conveyor, crate lock with initiator, limit switch, cork detection, hydraulics, light barriers, hydraulic valve, door switch, compressed air connection, control cabinet

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control Fgjdpfjxbgvfox Am Eoi - abrasive pressurized tank - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg Fgodjx A Tpnopfx Am Eei

Condition: new, Year of construction: 2025, functionality: fully functional, Sales only within Germany and Austria!!! Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was designed to package fresh food in a protective atmosphere (MAP) using barrier film (BDF). This machine produces hermetically sealed "pillow packs" which are then shrunk in a hot air tunnel. Technical specifications Model: FM 300 C X Condition: New Year of manufacture: 2025 Performance: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Barrier shrink film pouch Machine equipment Length of infeed conveyor: Free infeed section 2490 mm Equipment features Fsdpfx Amezntrtj Eegi ✅ Machine in wash-down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Film end sensor ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Sealing bar with double teeth for mono films ✅ Independent compression sponge for controlling the package volume ✅ "No product / No bag" function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dannsensor MAP Check 3 O2 & CO2 gas save Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,105 × 1,465 × 2,060 mm Shipping weight: 1570 kg (including transport packaging)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Welding robot Qirox QRC 320 incl. V7 control system and programming handheld device with cable, connection cable robot control cabinet, tactile sensor, arc welding search, point editor Cloos welding machine Qineo Puls 600, wire feeder, welding torch, torch hose package, mechanical cleaning, torch testing gauge OPTION: Motion weld equipment and Qineo Next 452 1 cell base frame incl. partition walls 1 two-station indexing table incl. 2 rotating-swiveling manipulators Load capacity 250 kg/station, rotation radius 500 mm 1 light barrier, 1 start box, arc protection on the indexing table, 1 service door with end-of-travel limit switch, connection control integrated Documentation, manufacturer's declaration Fgsdjzrpf Dspfx Am Eoi Delivery date: possible within 8 weeks. Subject to prior sale.