Damatomacchine newton 20 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1

Tig Welders MIGATRONIC MTE320 Tig Welder

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 96020538 Amperage 320 Nmymh Input 415/3/50 hz Duty cycle 320 amps @ 35%, 245 amps @ 60%, 190 amps @100% Fitted with touch, lesds, water cooler Features mounted on wheels Length 1120mm Width 510mm Height 965mm Nett weight actual. 260 Kgs. more
6

Bed type Anayak Milling machine ANAYAK VH-2200 - 1998VH 2200

Burgos, SpainSpain dealership location
6032 km
1998
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2200 x 600 mm Number of T slots: 5 T slots dimensions: 18 mm Traverses of axis X axis traverse: 2000 mm Y axis traverse: 900 mm Dwkfn3 Z axis traverse: 800 / 700 mm Milling head Head type: Autom... more
2
Make BKG Bruckmann & Kreyenborg Granuliertechnik, Type TEW A-2000, No 961008/2, New 1997, Material Stainless steel 1.4301 (304), Rotating sieve /"Centrifugal dryer + tempered water system", Sieve sizes dia. 400x1050mm, With inspection hatch , Motor 6,5 KW, 380-420/660-690 Volt, With sieve cage , Floor space 3,9x1,5 M, Total height 2,7 M, Extra Specifications With plate heat exchanger make GEA Ecoflex, type VT-20 CDS10 With pump make KSB Frankenthal, type Etachrom BC 40-200, motor 11 KW With temp... more
15

Shears / cutting equipment K 30 - 120 E 200

Babberich, NetherlandsNetherlands dealership location
6312 km
ready for operation (used)
Make Boschert Germany YOP 1990 Fkpxopmc Technical data Table scissors/Laser/PlasmatischCorner Notcher Cutting-length 220 mm Sheet ch thist6 mm Dimensions Length 1550 mm Width 1200 mm Height 1350 mm more
5

Beam coping machine Ficep 1201 RC

Köln, GermanyGermany dealership location
6408 km
2010
used
size of profile - max.:1220 Number of cutting torches: Stck. Cutting system:1 max. length:12000 mm B3mpxlje max. piece weight :6000 kg height of profile:80 mm profile width:mind. 45 mm profile width:max. 600 mm Ficep 1201RC coping robot system for coping of steel profiles, coping system with 6 positioning axis and length measuring system by gripper and 12 m each infeed-/outfeed roller conveyors more
6
Vehicle -Factory: Linde I3ekgej Type: L 20//0 hrs/HH 3.170 mm/FH 1,600 mm/New Device/Duplex/Battery BY. 2016 -Drive type: Electric -Load capacity: 2000kg -Load focus: -Lift height: 3170 mm -Range: 0 mm -Built: 2016 -Engine hours: 0 -Internal No.: E0603 _____ Mastast data -Masttype: Duplex -Lift height: 3170 mm -Height: 2100 mm -Free range: 1600 mm -Fork carrier: 0 mm -Forks: 1200 x 0 x 0 mm _____... more
4

Sundry Items ESAB LAW 520 500 amp Power Source

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 912 235 8172 Amperage 500 amps Be0tmruwt2 Input 380/420/3/50ac Duty cycle 500 amps @ 60%, 435 amps @ 80% and 390 amps @ 100% Length 2'10" / 864mm Width 1'8" / 508mm Height 2'8" / 813mm more
6

Bridge type Correa Bridge milling machine CORREA FP30/30 - 8900205FP30/30

Burgos, SpainSpain dealership location
6032 km
1996
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1800 mm Distance between columns: 1680 mm Z axis traverse: 800 mm Milling head ... more
2
Make Frewitt, Type MG-203, New unknown, Material Stainless steel, Granulating sieve (1x), Rotor sizes dia. 120x440mm, Inlet 320x490mm, Outlet 295x100mm, Motor , With variable speed drive , With switch , Floor space 1,0x0,9 M, Total height 1,0 M, Weight 220 KG, Extra Specifications - Sieve is missing What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect... more
5
weight max. in kg:2200 kg fork length:1200 mm stroke height:122 mm load centre:600 mm guage width:vorne: 508 mm guage width:hinten: 368 mm max. speed:6 km/h total power requirement:3,1 kW weight of the machine ca.:0,54 t dimensions of the machine ca.:1,9 x 0,726 x 1,3 m Bhxsztf more


damatomacc...
daily

New machines via email!

Stay updated!
4
Kollmorgen / Seidel Servostar 620-AS , serial number according to photo, used, normal traces of use, 100% functional, supplied with photos Uwqadoc9 more
5
work piece width:620 mm workpiece height:450 mm drill diameter:10 - 40 mm Ncv9b The Kaltenbach KBS 620 APS603 saw drill line from 1999 will be overhauled at Nenok and will be in good condition before delivery. The combination consists of the Kaltenbach band saw KBS 620 DG and an APS 603 drill line. The band saw is semi-automatic and equipped with diagonal cutting +/- and suitable for sawing steel profiles. The saw blade dimensions are 6175 x 41 x 1.3 mm. The cutting speed is infinitely variab... more
2

Welding Positioners BODE 20 VP 1000 kg Welding Positioner.

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. M27619 Capacity 1000 kg Table size 48" / 1219mm Table to floor 1000mm Table tilts 0-135 degrees, powered Table rotates 360 pegrees, powered Table speed Variable Input 415/3/50 hz Fitted with Pendant Length 1550mm Width 1220mm Height 1000mm Nett weight actual. 950 Kgs Oounsqul more
11

Bed type Correa Milling machine CORREA CF20/20 - 9691710CF20/20

Burgos, SpainSpain dealership location
6032 km
1996
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC407 Technical features Dimensions Table dimensions: 2000 x 700 mm Number of T slots: 6 T slots dimensions: 18 mm Traverses of axis X axis traverse: 2000 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal Manual (U2... more
2
Make Mixaco Maschinenbau Neuenrade, Type CM-2000 D, No 22.856, New 1993, Material Stainless steel 1.4301 (304), Cold mixer "Container mixer" (1x), Capacity 1600 Ltr, Useful capacity 800 Ltr, Vessel sizes dia. 1500x750mm (brand new "OEM" vessel), With cover (jacketed), Outlet dia. 300mm, With motor 90 KW, 380 Volt, With switchgear , Floorspace 3,2x1,8 M, Total height 3,0 M, Weight 10.000 KG, Extra Specifications -- RECONDITIONED -- What you can expect from Foeth: all our machines are in working c... more
6
Vehicle data - make: BT - type: SWE 200 D / / 2911 hours / initial lifting / HH 2000 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2000 mm - range: 0 mm - year: 2011 - operating hours: 2911 - internal No.: C0294 Cbqmujck _____ Mast data - mast type: standard - height: 2000 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Dimensions - length: 0 mm - width: 0 mm - heig... more
4
Kollmorgen / Seidel Servostar 620-AS , serial number according to photo, used, normal traces of use, 100% functional, supplied with photos Uwqjutxa more
5

Plate drilling VOORTMANN V 200

Niederlangen, GermanyGermany dealership location
6338 km
2008
used
plate size:1400 x 1000 mm Number of drilling agregates:1 vertikal Stk. bore diameter:10 - 40 mm Bebzkzj0ho speed:20 - 1200 m/min Thickness:min./max. 10 - 60 mm metrical thread cutting:M8 - M24 tool taper:SK 40 spindle taper:SK 40 max. tool weight:600 kg total power requirement:30 kW weight of the machine ca.:6,0 t dimensions of the machine ca.: m Drilling and positioning: servomotors The V200 has been specially developed for through holes, threaded and countersunk holes as well as center ... more
7

Guillotines / Shearing C M200A 2000mm x 4mm Mechanical Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1975
ready for operation (used)
Serial No. 75027 Capacity 2000 mm x 4 mm Back gauge Hand operated Work supports 2 @ 1000 mm Squaring arms 1 @ 1000 mm Input 380/3/50 5hp approx Clamps full length Actuated via Wander type foot switch Length 9' 4" / 2.84m Width 4' 6" / 1.37m Height 5' 10" / 1.77m Nett weight approx. 2400 kgs Be0takup8s more
4

Floor type Anayak Milling machine ANAYAK HVM-5000-PHS - 2002HVM-5000-PHS

Burgos, SpainSpain dealership location
6032 km
2002
ready for operation (used)
Retrofitted: 2019 Numerical control: FANUC 21iM Technical features Dimensions Table dimensions: 5.000 x 1.000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4.300 mm Y axis traverse: 1.200 mm Z axis traverse: 1.500 mm Milling head Head type: Universal Manual To... more
2
Make Bürkle Pressen Oberflachentechnik Freudenstad, Type LZKLL-200, [...] 8435, Roller coating machine (1x), Roll width 200mm, With motor , With pump , With motor 0,37 KW, 220/380 Volt (Ex), With feeding belt , With motor , With variable speed drive , New 1998, Mounted on frame , With switch , Floorspace 0,8x0,8 M, Total height 1,3 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w... more
6
Vehicle data - make: BT - type: SWE 120 / / 417 h / HH 2,700 mm / year 2015 - propulsion: electric - load capacity: 1200 kg - load Centre of gravity:-lifting height: 2700 mm - range: 0 mm - year: 2015 - operating hours: 417 - internal No.: C0521 _ _____ Mast data - mast type: standard - height: 2700 mm - height: 1840 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1840 mm - weight: 995 kg _ Ba... more
4
Vickers DBM-PS / CG2000 02 Frequency inverter, serial number according to photo, used, normal traces of use, 100% functional, supplied with photos Enmjrkk more
3
5 kW, 7.5 HP mobile on stable steering wheels cutting height 200 mm cutting height at 45 ° 140 mm left swivel-67° right swivel 45 ° cutting length 420 mm at 90 ° position cutting length 45 ° tilted up - 300 mm for left tilt 60 °, right tilt 30 ° 1 piece blade 520 x 4.4 x 50 mm 60 WZ neg. left roller conveyor with scale and stop valve, length 2000 mm up to the saw blade Machine length 4000 mm 1 piece roller rail extension with scale and 2 stop valve mounting left, length 4000 mm. Still a tele... more
8

Box & Pan Folders MORGAN HBP 100/10 2550mm x 3mm Hydraulic Box & Pan Folder. Manufactured 2007

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
2007
ready for operation (used)
Serial No. BKL 0011/907 Capacity 3mm x 2550mm Top beam rise & fall Hydraulically 50mm Maximum length of bend 2550mm Maximum material thickness 3mm Angle of bend 135 Degrees Input 415/3/50hz F3yt2lb Fitted with Back Stop By Hand Equipment Full Length Interchangeable fingers Length 3050mm Width 1000mm Height 1250mm Nett weight Actual 2,060 Kilos. / 2.1 Tons. more
3
Retrofitted: 2019 Numerical control: FANUC 21iM Technical features Be9ejzmk0d Dimensions Table dimensions: 3600 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2700 mm Y axis traverse: 1200 mm Z axis traverse: 1460 mm Milling head Head type: Multiangular... more
1
Material Stainless steel, Hot mixer (1x), Capacity 20 Ltr., Vessel sizes Dia. 230x300mm, With jacket , With motor 1,85 KW, 380 Volt, Ex, With variable speed drive , Mechanical lifting (0,24 KW), Floorspace 1,0x0,7 M, Total height 0,8 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Fo... more
9
Max bending length: 2540 mm Max sheet strength: 3 mm steel Be0znvouid Manually adjustable rear stroke up to 1000 mm Bending ground sanded Weight: About 3,000 kg more
5
NSK ESA-Y3040TF1-20.1 Frequency inverter, serial number according to photo, used, normal traces of use, 100% functional, supplied with photos Nnmwh more
9

Shredders Lindner MS200 Shredder

bt70 3ey, United KingdomUnited Kingdom dealership location
5402 km
ready for operation (used)
Waste shredders for sale, UK Hours: 3500 Vsqzxi Included screw conveyor High speed shredder more
15
Serial No. A1220A0120 F9x9ttl Control Siemens Sinumerik 840 D Capacity 5000 kW Thickness of cut Mild Steel 25mm / Stainless Steel 20mm / Aluminum 12mm Maximum material size 3000mm x 1500mm Maximum material weight 900kg X axis travel 3000mm Y axis travel 1500mm Z axis travel 115mm Cutting feed rate Simultaneous 140m/min Input 400/3/50hz 105 kva Fitted with Sick Guards, Truflow 5000kW Power Source Equipment Chiller Unit, Dust Extractor, Shuttle Table, 2 x 250 mm Cutting Heads. Features Beam on h... more
6
Vehicle data - make: BT - type: SWE 200 D / / 2,800 STD / initial lifting / HH 2100 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2100 mm - range: 0 mm - year: 2013 - operating hours: 2800 - internal No.: C0218 Mv9cx _____ Mast data - mast type: standard - height: 2100 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Dimensions - length: 0 mm - width: 0 mm - height: ... more
2
Make Gebr. Ruberg Maschinenfabrik Nieheim, Type FCM-200 SR, No 171/11577, New 2001, Suitable for barrels dia. 582x1015mm, Material Stainless steel 1.4301 (304), Cold mixer "Batch barrel mixer" (1x), Vessel sizes dia. 650x400mm, With motor 7,5 KW, 400/690 Volt, With lump breaker , With motor 4,0 KW, 400/690 Volt, Mounted on frame , With switchgear , Floorspace 2,1x1,5 M, Total height 2,8 M, Weight 2350 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced ... more
1
Machine is offered as owner, subject to unsold * Sakurai Oliver OL-466 SIP, Year 2005 Ref D4991 47x66 - 4 Colors - Counter : ca 45 mio impressions Equipped with: . Console DTC (Sakurai Delivery Top Console) with Touch Screen . SPC (Semi-automatic Plate Change) . Cocking Register . Automatic Washers: Blanket Cylinders & Inking Rollers . Olivermatic Dampening . Baldwin Refrigeration System & Bal Control . Feeder with Suction-belt feed table . Electronic Double Sheet & Side lay Detect... more
4
Vertical band saw Maine type record SM 420 Masch. No. 25615 built 1983 Roll diameter 420 mm Cccjkmvw Throat width 410 mm Unloading height 295 mm Table size 600 x 600 mm Speed 12-375 m / min. 8 levels Blade length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Power supply 380 v, 50 Hz -Butt welding machine IDEAL BSO / 16 with scissors and sharpening stone -4 transmission levels + 2 engine speeds -Tape guide height adjustment by Handwheel -Working table tilt +/-45° -Tilting wo... more
11
Technical specifications Working width minimum: 55 mm with workpiece thickness 22 mm 100 mm with workpiece thickness 60 mm Vsqek3 Workpiece thickness 12-60 mm Workpiece overhang 30 mm Edge material strips 0,4 - 20 mm Edge material roll 0,3 - 3 mm Roll diameter max. 900 mm Feed 18 - 24 m/min Units: Pre-Milling Unit 2 x 3 kW; 150 Hz; 9000 rpm Workpiece preheating for heating the workpiece edge before the glue application Gluing A 20 Melt adhesive Unit QA34 on melting unit with gran... more
4

Sundry Items ESAB LAW 520 500 amp Power Source

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 912 235 8176 Amperage 500 amps Input 380/420/3/50 ac Duty cycle 500 amps @ 60%, 435 amps @ 80% and 390 amps @ 100% Length 2'10" / 864mm Be0tm2f3h3 Width 1'8" / 508mm Height 2'8" / 813mm more
6
Vehicle data - make: BT - type: SWE 120 L / / 348 h / HH 3,300 mm / default / initial lift, good condition - drive type: electric - load capacity: 1200 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2011 - operating hours: 348 -Internal No.: E0032 _ Beilozkpqq Mast data - mast type: standard - height: 3300 mm - height: 2130 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2130 mm - weight: 97... more
2
Make Werner & Pfleiderer, Type LH-20, No F-1190, New 1975 (in good condition), Internal mixer (1x), Capacity 30 Ltr, Useful capacity 20 Ltr, Inlet ram feed , Hydraulic operated top ram (hydraulic dr. 5,5 KW + 1,1 KW, 220/380 Volt), Drop door , With jacket , Cored rotors , Motor 75,0 KW, 380 Volt, With switchgear (Dim. 1,4x0,6x1,7 M - LxWxH) What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destina... more
8
The band is suitable for hooks as the belt with a bar to the baffle covered length 1400 mm Width: 200 Gripgurt Adjustable belt speed Nkzlv Separator role 220 V more
7
4- Roller feed MAGGI type STEFF 2044 very good condition, as new, traces of use are hardly available with tripod Easy handling and positioning Roll width: 60mm Diameter: 120mm the casting tripod is very stable and torsion-resistant each rubber roller is individually mounted, with a large travel optimal safety against setback with swivel joint for horizontal and vertical use the 4 wheels are also very good works perfectly Professional machine, no DIY scrap with 8 different speeds, ... more
3
A16B-1100-0080/08 Fanuc spindle drive Board with A20B-0008-0240/0207D PC Board, used, 100% functional Cz7htgaw more
10
Serial No. 4058 Capacity 4000 kg Drive type electric AC Hours 28.7 Parking Brake electromagnetic Input 240v charger/ drive motor 2 kw Equipped with dox-x 2000kg scissor lift table Features variable speed 0.1 km/h - 5 km/h Be0tvpx9mz Length 2800mm Width 800mm Height 1800mm Nett Weight Actual. 920 Kgs more
6
Vehicle data - make: still - type: R 50-10 / / 1.0 tonne / HH 3,240 mm FH 1.620 BRA 2,050 / duplex - drive type: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 3240 mm - range: 0 mm - year: 1993 - operating hours: 9696- Internal No.: E0048 _ Mast data - mast type: duplex - lifting height: 3240 mm - height: 2050 mm - free lift: 1620 mm - carriage: 0 mm - forks: 1100 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2050 mm - weight: 3500 kg _ Bb... more
2
Type MG-204, No 04741091, New 1974, Material Stainless steel, Granulating sieve (1x) make Frewitt Fribourg, Rotor sizes dia. 122x440mm, Inlet ± 490x300mm, Outlet 350x100mm, Motor , With variable speed drive , With extra sieves , Mounted on wheels , With switch , Floor space 1,1x1,0 M, Total height 1,5 M, Weight 280 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You ar... more
8
The band is in a good condition length 1400mm Beh0pzme9s Width: 200mm Gripgurt Separieren roll Adjustable belt speed more
8

Machining centers (vertical) Mazak VORTEX 815/120

Kaiserslautern, GermanyGermany dealership location
6526 km
2000
ready for operation (used)
General Data Measurements width 8500 mm Measurements depth 4500 mm Measurements height 3000 Machine weight 16700 kg Control Unit Brand FANUC Model 15i-M Main Drive Fm0hun23 Number of spindles 1 Spindle speed range 50-10000 1/min Movement X-Axis Movement 3048 mm Y-Axis Movement 810 mm Z-Axis Movement 610 mm A-Axis Movement ± 30° B-Axis Movement ± 30° Tools Slots in storage 30 Media Power consumption 37 kVA Chip conveyor Yes Internal cooling Yes This Mazak VORTEX 815/120 Vertical Machining ... more
4
Bosch SD B4. 140, 020-01.010 brushless servo motor permanent energized, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bfanskwlqs more
15
Serial No. K11093 Capacity mild steel 1.5 mm, stainless 1 mm, aluminium 2.5 mm Top Beam Rise & Fall 200 mm Maximum Length of Bend 8020 mm Angle of Bend 0 - 140 degrees Input 400/3/50 7.5 KW Fitted With Fiessler infra - red guarding, and full length slitting attachment. Features Backgauge depth 1250 mm Control Jorns CNC 800 Length 9.8 m Width 2.2 m Height 1.95 m Nett Weight Actual. 7,250 Kgs / 7.14 Tons Be0tf9002f more
6
Vehicle data - make: BT - type: SWE 200 D / / 2.702 STD / initial lifting / HH 2100 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2100 mm - range: 0 mm - year: 2013 - operating hours: 2702 - internal No.: E006 5 _ Ncgl9 Mast data - mast type: standard - height: 2100 mm - height: 1630 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1630 mm - weight: 875 kg _ Battery & ... more


damatomacc...
daily

New machines via email!

Stay updated!

to

to

Edit search
DAMATOMACCHINE NEWTON 20
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.