Used Defective Winding Machine for sale (64,885)

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Fodpfx Ajvripyonwegb

Year of construction: 1993, condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Fedpen I T Tgsfx Anwsgb

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Fedju H R Iqspfx Anwegb Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Fjdpjud U Sfefx Anwegb Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spring diameter: 200 mm, wire diameter (max.): 12 mm, Spring winder with a large accessory package! TECHNICAL DETAILS Wire diameter: 2.0 - 12 mm Round steel wire gauge: Ø 5.0 - 14.0 mm Square steel wire gauge: 5.0 - 12.5 mm Feed length: 17,400 mm Wire feed speed F1: 40 m/min Wire feed speed F2: 28 m/min Wire feed speed F3: 20 m/min Springs Spring diameter: Ø 25 - 200 mm Outside diameter (current setting): 34 mm Length (current setting): 135 mm Output range (output): 1 - 70 pieces/min End product options: Right- and left-handed tension/compression springs Current end product: Tension spring, wire Ø 4 mm Control Control system: Process Controller BRANKAMP MACHINE DETAILS Machine weight: approx. 10.5 t Machine dimensions (L × W × H): 2,600 × 1,800 × 2,700 mm Lubrication system (L × W × H): 600 × 400 × 800 mm Control cabinet (L × W × H): 500 × 1,200 × 2,100 mm Reel (L × W × H): 2,600 × 1,800 × 2,700 mm Total power requirement: 18.5 kW EQUIPMENT - 6 feed rolls for wire intake Ø 4 mm - Lubrication system - Wire reel reel - Control cabinet cooler - Reel - Control panel with BRANKAMP Process Controller Fsdpfxjwlp Eas Anwegb - Accessories and spare parts: approx. 105 wire reels + approx. 13 wire guides - New purchase value approx. €100,000

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm Fedpswd Emwefx Anwegb The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 2003, condition: good (used), - Fully automatic - For packing bar shaped products - Product height (mm): 19 - 600 - Product width (mm): 600 - 2100 - Product length (mm): 2400 - 5700 - Product weight (kg): 3000 - max. cross-section diagonal (mm): 2184 - Brake motor for winding ring drive: controlled by frequency converter - 2 driven roller conveyors: each 3000 mm long for the infeed side of the machine, equipped with brake motor - 2 driven roller conveyors: for the outfeed side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) executed with brake motor - 1 packing material take-up: for stretch film, crepe paper, PE film etc. - packing material roll width max. (mm): 500 - Automatic gripping, cutting and feeding device: for PE stretch film, in smooth cut version - Electrical device for laying edge protection beads at the beginning and end of the product to be wrapped: preselectable by means of a timer Fjdpfxjhyxfvo Anwjgb - Electric power pre-stretch system: for PE stretch film with thickness 17 - 50 my - Machine length (mm): approx. 2000 - Machine width (mm): approx. 3400 /3800 - Machine height (mm): approx. 2200 above floor level

Condition: used, Year of construction: 1994, Wrapping Machine Böhl Type Meister/S-600 Technical Specifications: • Fully automatic, horizontal wrapping machine • Product height (mm): approx. 10 - 300 • Product width (mm): approx. 10 - 600 • Product length: unlimited • Maximum cross-sectional diagonal (mm): approx. 600 • Packaging materials: PE stretch film, VCI stretch film, PE film, crepe paper, etc. • Packaging material width (mm): up to 125 • Packaging core diameter (mm): 76 Fgodpjxhtl Tjfx Anweb • Automatic cutting and clamping device for packaging material • Automatic motorized product transport • Electrically adjustable wrapping unit height • Infinitely adjustable film tension/pre-stretch • Quick-change device for packaging material rolls • Adjustable conveyor speed via frequency inverter • Pneumatic pressure roller in the machine's discharge area • PLC controlled

Condition: new, Plastic film wrapping packing machine Adjustable rotation speed. Table diameter depending on the customer request. Manual or automatic processing. Fgjdpfod A Udnsx Anwsb Various recordings and accessories for different task areas.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Fgodpfx Anexzuiyewsb

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. Fgjdpfx Anowl Hp Njweb All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: good (used), Year of construction: 2011, Unit for unwinding and feeding pre-products Year 2011 Fgjdpsv Sddfjfx Anwjb

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls Fodpfx Ansv Dutuswsgb Specification: Wrapping material: parchment, cooking paper Paper thickness: 10 - 70 g/m2 Speed: 500 rolls of 15 m / hour Working width: 200 mm - 420 mm Main roll of maximum diameter: 1000 mm The maximum diameter of the finished roll: 60 mm Electrical connection: 400 V, 50 Hz Power consumption: 6 kVA Air consumption: 200-400 l/min at 6 bar Weight: 1200 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Maximum frame dimensions with automatic unloading – seamless mode (Y-X mm): 3,430 x 2,630 Fgsdsy N Dnwspfx Anwjb Minimum frame dimensions with automatic unloading – seamless mode (Y-X mm) - Z Frame: 450 x 370 (*) Minimum frame dimensions with automatic unloading – seamless mode (Y-X mm) - L Frame: 420 x 300 (*) Minimum frame dimensions with automatic unloading – seamless mode (Y-X mm) - Sash: 450 x 330 Minimum frame dimensions with longitudinal frame loading and threshold assembly – seamless mode (Y-X mm) - L Frame: 420 x 410 (*) Minimum frame dimensions with longitudinal frame loading and threshold assembly – seamless mode (Y-X mm) - Sash: 450 x 440 (*) Minimum profile height (mm): 35 Maximum profile height (mm): 110 Maximum profile width (mm) – Frame: 115 (*) Maximum profile width (mm) – Sash: 130 (*)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Electrical connection: 3x230 V Glazing bead recovery system The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. All features and functions are still intact. Sold without tooling (cutters). Fgedpfx Aeyvhnujnwjb

Condition: good (used), Window handle drilling machine Fodpfey Edmlox Anwjgb

Condition: good (used), Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Weight kg 2200 Fodpfx Ansytn U Iewogb

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Fsdoymm Nqepfx Anwogb Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Fodpfx Asxzzxbjnwjgb Line supervisor laptop

Condition: used, Year of construction: 1993, Tools IV 68, 78, and preservation protection. Tenoning and slotting spindle – 3 tools Motor 7.5 kW Fodpfx Ajy Hrrxsnwjgb Profiling spindle – 3 tools Motor 5.5 kW

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Pre-Stretch rewinder designed for the conversion of Pre-Stretched stretch film products with less operator need. Machine is be able to role as a multi-functional automatic high speed stretch film rewinder and an effective hand stretch film which can be used to wrap a wide variety of goods. Multi option finished roll production. The machine features automatic core loading, core film affixing, wind-to-legth film cutting and automatic machine removal with a variety of different finished roll delivery systems. Fgjdsy Rd Exopfx Anwob

Year of construction: 2026, condition: new, functionality: fully functional, Fully automatic stretch film slitting - rewinding model ULTIMA 250 is characterized by an extreme ease of use and high versatility in production. The machine is made of high - end electronically and mechanical equipment and is able to produce stretch film hand rolls, machine rolls and cling film rolls. The machine produces roll with different core diameters, in order to easily satisfy the market requirements, which are continuously evolving. ULTIMA 250 rulo dilme ve sarma makinesi, çeşitli film malzemelerinin dililmesi ve sarılması için uygundur, gömme ana kontrol paneli ile çalışır, esnek ve kullanımı daha kolaydır. All manual operations, including maintenance can be done even inexperienced operators. The longitudinal dimensions of the cutting platforms are as follows (mm) from: 50 mm x 10 rolls up to 250 mm x 2 rolls. Fodjy N Un Ijpfx Anwsgb

Condition: excellent (used), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, year 1997 Crosscut saw, pneumatically indexed (3 kW) with laser alignment light Slotting spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal top, pneumatically indexed – 3 kW motor Feed speed adjustable from 6–12 m/min – 1.1 kW motor Screen control for 99 window types Support bar for muntin production, pneumatically indexed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Corner jointing unit with support rail Fodpfey Dud Esx Anwegb Return conveyor to operator side Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ tool set, IV-78 THE SYSTEM IS IN VERY GOOD TECHNICAL AND COSMETIC CONDITION Delivery: EXW Delivery time: Prompt by arrangement Inspection: By appointment Payment: Upon notification that the goods are ready for dispatch Subject to prior sale and errors excepted.

Condition: good (used), Drilling machine for window lock and hinge holes. Set composed of two machines. Price €600. Fgjdpfsyw R Rusx Anweb

Condition: good (used), Year of construction: 1994, SAC F4 – year 1994 – very well-preserved, maintained condition, still in production. In 2005, the machine was upgraded to a more modern control system. Fjdeyw R Iajpfx Anwsgb SAC F4 TL – year 2002 – machine with full equipment, currently in storage (only the nameplate and a picture from the internet available). Included are tools for the production of Euro-style windows and doors, thickness 78 and 92 mm, brand Vydona – drawings attached. Price for this set (2 machines + tools): €9,000