Used Diode for sale (110)

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Fpedpedux Duofx Agreb Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Fpjdpfoumi Stsx Agrjb Price per piece ex location: 1.950.-€ (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2025, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) new & second-hand Fpsdpsdmdvvefx Agrjb All offers subject to prior sale

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 74 h, laser power: 3,300 W, laser wavelength: 1,030 nm, power: 12 kW (16.32 HP), input voltage: 400 V, type of input current: three-phase, total length: 770 mm, total width: 1,400 mm, total height: 1,770 mm, Laser unit with low working hours. It was as a backup unit. Fedpfxjtwb Tfs Agrspb

Condition: as good as new (ex-display), Year of construction: 2022, Machines are in stock and ready for demonstration purposes. Gladly also on Saturdays! We offer a laser welding machine for manual operation. This technology is very new and often lacks expertise, infrastructure and after-sales service in the sale of these machines. However, these are exactly our strengths and this is what we put a lot of emphasis on. Decades of experience in the welding trade are the perfect basis for us to advise you perfectly. We do not only deliver a machine but support you by demonstrations, feasibility tests, parameter optimization ... Everything that makes a competent partner. Technical data: ===== Laser source: fiber laser Output power: 1500 Watt Power range: 10 - 100% Fpsdpoi Elxyjfx Agreb Wavelength: 1080nm Output operation: continuous / modulated modulation frequency: up to 50kHz adjustable axial run-out: 0.1 - 5mm central focus distance: standard 120mm (150mm optional) cooling: integrated water cooling heating time: 1 minute working humidity:

Condition: ready for operation (used), Fanuc A04B-0811-D401 LD Unit diode laser SN: P95P00037,used, good condition, 100% functional, scope of supply according to photos Fodpfjmq H Szox Agropb

Year of construction: 2025, condition: new, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 Fjdpjb Uptcjfx Agrjpb 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) Fpodpfx Agjxw A Icjrsb :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: used, functionality: fully functional, mileage: 350,949 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cruise control with active prediction Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Fpedpex Tdm Uefx Agreb Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Fpodpjx R E Nljfx Agreb Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, Fpodpfxergaw He Agrob diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 64,820 h, machine/vehicle number: A1220A0892, laser hours: 34,068 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 710 kg, overall weight: 11,500 kg, space requirement height: 2,260 mm, space requirement length: 9,600 mm, space requirement width: 7,760 mm, working range: 3,000 mm, Special equipment: + 3200 on Laser TruFlow 6000 + RotoLas with automatic. Chuck + Base jaws jaw type 7-9 + Prism set jaw type 8 + Base carrier with sliding device + Workpiece carrier D 15-310 mm Standard equipment: - Closed machine frame with integrated laser unit, - Movement unit for high-precision machining, - Torque drive in combination with linear direct drives, - Closed beam guidance, - Single cutting head strategy, - Cooling unit, - Automatic pallet changer in longitudinal direction, - Wide longitudinal conveyor belt, - 17" touch color screen, - Work area lighting, - Position laser diode, - Spray device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine Cutting head Fedpfevn Stmjx Agrjpb - LensLine, - Lens cutting head with 250mm focal length, - Universal cutting head quick-change device (UTI), - ControlLine, Control - Simple / advanced workshop programming, - Fast Reproduction - Integrated technology data, - Automatic shutdown, - Production plan, - Programmable cutting gas/pressure selection, - SprintLine, - ContorLine, - Microweld, - FasLine, - AdjustLine, - Teleservice, - Diagnostic functions, - Online help, - FlyLine Data transfer - USB interface, - RJ-45 network connection Safety - CE marking, - Light barriers, - Laser monitoring system, - Multi-chamber extraction system, - Compact dust extraction system, - Machine cover with Makrolon panes Extended machine equipment: + Thin sheet metal - Productive package - High-speed cutting - Lens cutting head 130mm focal length - Compressed air cutting + Pallet changer cross including safety device + MDE interface + LoadMaster including loading station and spreading magnet

Condition: used, Year of construction: 2015, Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m Standard configuration Machine: Stable machine frame Pipe support raw material with automatically retractable pipe supports Push-through chuck with self-centering parallel clamping rollers High-precision drives LoadMaster Tube 6.5m with bundle trough exclusion station Fpedpfx Ageuqdg Tjreb parts tray Pipe support finished part with extendable guide rollers Scrap conveyor belt with bin Closed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure automatic switch-off Ergonomic control panel with color touch screen Trump TruLaser: External solid-state laser TruDisk 3001 with 1 LLK outlet, diode-pumped disk laser with a wavelength of 1.03 nm Excitation via pump diodes laser power control Logbook function LAser cutting unit: universal cutting unit One cutting head strategy ControlLine control: Sinumerik 840 D SL easy handling Online help Integrated technology data Teleservice via the Internet Data transfer: RJ45 network connector USB Security: CE marking multi-beam light barriers Monitoring system for gas pressure, temperature and cooling water Compact dedusting system Protective cabin with certified safety panes Extended machine accessories - Rapid Cut- Bevel cut technology package- Finished part length +1.5 m (to 4.5 m)- SeamLine Tube- Wireless Operation Point- Low-scratch version LoadMaster Tube 6.5 m- Tube diameter 15 mm Automation - LoadMaster Tube 6,5 m with bundle support

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Description: Year of manuf. : 2020 technical data Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch) Fodpfexv Nk Usx Agrspb

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: A0235A0225, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, sheet thickness (max.): 20 mm, Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 Watts Max. sheet thickness (mild steel): 20 mm Max. sheet thickness (stainless steel): 15 mm Max. sheet thickness (aluminum): 10 mm STANDARD EQUIPMENT: - Enclosed machine frame with integrated CO2 laser unit (TruFlow 4000) including NitroLine, beam tube ventilation with N2 and LensLine, chiller unit - Additional high-dynamic Xp axis - Motion unit for high-precision processing - Drives with maintenance-free three-phase AC servomotors - Enclosed beam guidance system - Automatic pallet changer with longitudinal conveyor belt - Laser logbook function - Laser cutting head with 5” lens - Laser cutting head with 7.5” lens Fpodpfx Agexx Ddnsrjb - Quick-change system for cutting head Programming - Programmable cutting gas selection / pressure setting - Programmable power cycles - Automatic sheet edge detection - ControlLine - FocusLine Plus - Laser power control - Positioning laser diode - NitroLine - Microweld - PlasmaLine - ContourLine - SprintLine - Spray device - Automatic shutdown - Work area lighting - Control system Siemens SINUMERIK 840D: Open PC-based control, user-friendly operation, USB interface, online help, diagnostic functions, maintenance logbook, RJ45 network connection, 3.5” floppy disk drive, TFT color display - Workshop programming with TruTops laser lite - CE marking - Safety features: Multi-beam light barriers, multi-chamber extraction, compact dust extractor, and machine enclosure with Makrolon panels Reason for sale: We have purchased a new machine Turbine: Completely overhauled in 2024 HF tube: Almost new Control board: Almost new

Condition: used, Year of construction: 2007, Format: 520 x 740 mm Equipment: CTP Computer-to-Plate Imagesetter For Thermal Plates Fodpfx Agox Elwlerjpb Mit Prinekt Workflow, Prinekt Meta Shooter, Prinekt Meta 64 Diodes 17 Plates/Hour at 2540 dpi PDF Toolbox, Interne Platten Manual plate loading, automatic plate unloading Software license only for a width of 52 cm and 74 cm

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off Fpsdpfx Asuthz Tegreb - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser hours: 22,600 h, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, feed rate X-axis: 200 m/min, workpiece weight (max.): 900 kg, overall weight: 12,000 kg, total length: 111,000 mm, total width: 46,000 mm, total height: 26,000 mm, space requirement height: 2,600 mm, space requirement length: 11,100 mm, space requirement width: 4,600 mm, working range: 3,000 mm, Special features: + 5000 on TruFlow 7000 30mm stainless steel! The machine was partially overhauled by a certified TRUMPF used machine partner. Optionally, for an additional charge, we provide: installation, commissioning, and training for up to three operators at the buyer's site, plus transport and travel costs. Standard Features: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive combined with linear direct drives - Enclosed beam guidance - Single cutting head strategy - TFT color monitor - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray system - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow - Maintenance-free turbo radial blower - Lens cutting head with 250 mm lens - Universal quick-change system (UTI) with bus connection - LensLine with condition check - ControlLine: height control and sheet edge detection - SINUMERIK 840D - Automatic shutdown - ConturLine - FastLine - FlyLine - Microweld Fodpfxsivaubo Agrepb - USB interface - RJ-45 network connection - CE Mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Complete operating instructions - Lens cleaning case - Transport locks - Crosshairs/measuring bridge

Condition: used, Year of construction: 2007, machine/vehicle number: A0240A0521, Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- AutoLas Plus- Hi-Las- PMS TRUMPF Laser- CO2 laser TLF 3200- Cooling unit- Radio-frequency - Radio-frequency excitation - Programmable cutting gas pressure - Laser power control - Logbook function Cutting head - Universal quickchange device for cutting head Control Unit - Siemens Sinumerik 840 D - 3,5" floppy drive - RJ45 network connection - Automatic shut down mechanism - Dignostic function - Maintenance logbook - Technology data Safety - Light barriers - Compact dust extractor - Multi chamber exhaust system - Beam delivery system Programming - Workshop programming ToPs 100 lite Extended machine accessories none Fedpfx Aeuqcw Rogrspb Automation none

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 30,000 h, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, AVAILABLE FOR A SHORT TERM: TRUMPF TruLaser 3030 – 3.2 kW – Year 2007 with RotoLas! TECHNICAL DATA: Make: TRUMPF Type: TruLaser L 3030 – 3.2 kW Year of manufacture: 2007 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 12 mm Max. sheet thickness aluminum: 8 mm Operating hours: NC on 30,000 h (Oct. 2024) Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: TLF 2000 CO2 laser with high-frequency excitation, maintenance-free turbo radial blower, Reflector telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Maintenance-free three-phase servo motors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS High-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensors - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shutdown - Workspace lighting - Sinumerik 840D control system: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - ToPs 100 lite workshop programming Fpjdsu Afcbjpfx Agrjb - Safety: multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TruFlow 3200 laser including lens monitoring sensors - PCS Process Control System - Preparation for LiftMaster - RotoLas pipe cutting system for cutting pipes and profiles

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Fjdpfx Aexur Iasgropb Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 39,500 h, laser power: 5,000 W, TRUMPF TruLaser 5030 – 5 kW Classic TECHNICAL DATA: Manufacturer: TRUMPF Model: TruLaser 5030 – 5 kW Classic Year of manufacture: 2009 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 5,000 Watt Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Operating hours: 39,500 h STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 5000, high-frequency excited, maintenance-free turboradial blower, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap Fjdpfx Agow Rytqoropb - Drives: Gantry drive combined with linear direct drives - Quick-change cutting head system - PlasmaLine - Fast processing with SprintLas for all sheet thicknesses - ContourLine for production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Automatic sheet edge detection - ControlLine capacitive height control and process regulation - Positioning laser diode - Automatic focus position adjustment (FocusLine) - Automatic nozzle cleaning - PierceLine - NitroLine high-pressure cutting - Laser power control - Automatic shutdown - Work area lighting - SIN 840D control: PC-based open control, user-friendly operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Shop floor programming - Safety: Multi-beam light barriers, fully enclosed beam guidance with nitrogen purging, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - Network connection: RJ-45 network port via teleservice installation - 3.5" floppy disk drive - TFT color monitor - Electrical equipment for 400 V / 50 Hz three-phase current - Finish: Textured white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens OTHER: - The machine underwent a technical overhaul in 2021

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data Fjdpewld Suofx Agrepb - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 39,500 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting Fedpeulqrljfx Agrspb - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens Fpjdpjrwlwnefx Agrjb - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer