Used Disk Hacking for sale (637)

Year of construction: 2025, operating hours: 1,050 h, condition: reconditioned (used), functionality: fully functional, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Easily meet the statutory 1% threshold! From May 2025, organic waste may only be treated if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation instead of Shredding - Gentle Bag Opening: Waste bags are reliably opened without shredding the contents. A pre-shredder (slow-speed) is not required! - Maximum Film Size: Plastic films remain largely intact and are efficiently removed during the first screening process, before they can fragment in the compost windrow due to turning, heat, and UV exposure. - Highest Purity: Prevents microplastics in the process and ensures high end-product quality. Economic Efficiency: - Legal Compliance: Reliably stay below the 1% threshold required by the BioAbfV. - Process Optimization: Reduced effort in post-cleaning. - Cost Efficiency: Significant savings on diesel and wear costs since no pre-shredder is necessary. - Integrated Air Separator: No need for bulky auxiliary machines. Saves space and maintenance costs. Innovative Process (Flexibly Controllable): - Organic Waste Processing (2-fraction mode): Reversible mid-size discharge belt brings together medium and fine fractions for a homogeneous mix. Result: Clean target fraction for digestion/composting plus coarse fraction with films/contaminants. - Compost Refinement (3-fraction mode): Separation into premium compost, structural material, and energy wood. The ballistic separation effect removes stones, glass, and hard plastics via the stone fraction belt. Integrated air separators remove any remaining film residues. Current Application: Successful organic waste processing for wet digestion. The machine delivers a contaminant-free, homogeneous fraction for the fermenter, preventing the formation of sink or floating layers. Inspection & Demonstration: Live demonstration available at our partner facility in the Kelheim district. Processing steps can be discussed directly with the plant operator. Nwedsy Elwfepfx Akcsf Technical Data: - Model: Lepton 5100 | Year of manufacture: 2025 | Approx. 1,050 operating hours - Location: D-84069 Schierling | Availability: Short notice - Screen Decks: Deck 1 (52mm), Deck 2 (43mm) - Equipment: Variable dosing roller, volume measurement, air separator preparation, compressor, LED lighting package, radio remote control. - Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). - Transport Dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). - Screening Materials: Compost, green waste, biomass, wood, municipal waste, RDF. - Condition: Very good, fully operational. The machine will be completely overhauled by us before sale.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2015, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: light grey, Year of construction: 2015, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 6.621 kg Carrying capacity: 32.379 kg GVW: 39.000 kg Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 01/2027 Technical condition: good Visual appearance: good Product safety Nwjdpfxey Au Tkj Akcsf Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2015, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: grey, Year of construction: 2015, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 6.621 kg Nwodpfxsy Au Sgs Akcof Carrying capacity: 32.379 kg GVW: 39.000 kg Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 250 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective protection against sparking Nwodpfx Akovlkvhecef Adjustable workpiece supports Technical specifications SANDER BOARD SIZE 250 x 32 mm disc or grinding wheel bore 32 mm GRINDING WHEEL GRIT K 36 / K 60 RPM 2960 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW POWER 400 V DIMENSIONS 530 x 310 x 1150 mm WEIGHT 32,5 kg

Condition: new, Year of construction: 2026, The Cormak M200S sander is a professional tool with high performance and precision. Equipped with a powerful drive motor, it provides fast and efficient grinding of various materials. The rotor design based on ball bearings ensures motor reliability and quiet operation. Plastic guards protect against sparks. This is a versatile tool that is easy to use thanks to the speed control and ergonomic handle. Ideal for professionals and hobbyists. Features of the M200S disc grinder The Cormak M200S grinder is a professional grinding tool that offers an excellent combination of high performance, precision and durability. Thanks to the rotor design based on ball bearings, this grinder guarantees motor reliability and quiet operation, which is important for both intensive use in the workshop and in domestic applications. The powerful drive motor of the Cormak M200S sander is equipped with high torque, which translates into efficient material removal and a fast surface finish. The number of revolutions provides the optimum sanding speed for a variety of materials. The motor power of 0.9 kW allows efficient material removal and rapid achievement of the desired results. Designed for use with 400 volts, ensuring stable power supply and efficient operation. Regardless of the type of material, be it wood, metal or plastic, this sander will meet all requirements. Equipped with a 200x32 mm fi sanding disc, it enables larger surfaces to be sanded efficiently. An important aspect that contributes to work safety is the Cormak M200S sander's plastic guards. As well as providing protection from sparks, the guards are lightweight yet robust, making them easy to manoeuvre and reducing operator fatigue. In addition, the intuitive control panel provides convenience and ease of use. If you are looking for a professional sanding tool that offers reliability, high performance and precision, the Cormak M200S sander is an excellent choice. Its robust construction, powerful motor, protective guards and ability to connect a dust extraction system make it an indispensable tool in the workshop, carpentry shop or during renovation work. Check the specifications and compare prices to find the best deal for your needs. Technical specifications of the M200S disc sander SIZING DIAGRAM 200 x 32 mm disc or grinding wheel opening 32 mm DISC GRANULATION K 36 / K 60 RPM NUMBER 2850 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW VOLTAGE 400 V DIMENSIONS 520x300x1130 mm WEIGHT 26 kg Nwodpfx Akjvlkttocjf

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 300 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective spark protection Fitted with 35 mm diameter suction port, with possibility of connecting an extraction unit Adjustable workpiece supports Unlike the competition, the machine is equipped with industrial bearings from world-class manufacturer NSK. Technical specifications DIMENSION OF THE DISPLAY 300 x 50 mm disc, grinding wheel bore 75 mm Nwjdpfovlkwfjx Akcjf GRINDING WHEEL GRIT K 36 / K 60 suction nozzle diameter 2 x 35 mm NUMBER OF RPM 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V DIMENSIONS 700 x 430 x 1170 mm WEIGHT OK. 78.5 kg

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) * MFD 2017, as-new condition * laser power: 5 kW * wavelength: 1030 nm * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm Nwsdpoqfguajfx Akcsf * fiber connector: LLK-D * option: field bus interface & IIO3-card * 2 identical lasers available

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2016, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: grey, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Nwjdjyz D Alepfx Akcsf Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.621 kg Carrying capacity: 32.379 kg GVW: 39.000 kg Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Nedpfxsvkdqie Akcewf Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: good (used), axle configuration: 2 axles, first registration: 03/2020, loading space length: 13,490 mm, loading space width: 2,480 mm, loading space height: 2,640 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: red, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.791 kg Carrying capacity: 26.209 kg GVW: 33.000 kg Functional Make of bodywork: Schmitz Ferroplast Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 10/2026 Technical condition: good Visual appearance: good Nwsdpfxsyya Uzo Akcef Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 2 axles, first registration: 03/2020, loading space length: 13,490 mm, loading space width: 2,480 mm, loading space height: 2,640 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: red, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 6.791 kg Carrying capacity: 26.209 kg GVW: 33.000 kg Functional Make of bodywork: Schmitz CargoBull Ferroplast Maintenance, history and condition Nedoyya Uuepfx Akcjwf Number of owners: 3 APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,310 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 13,800 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2016, Equipment: ABS, Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 30%; Reduction: single reduction Rear axle 2: Tyre tread: 40%; Reduction: single reduction Rear axle 3: Tyre tread: 30%; Reduction: single reduction Unladen weight: 8,430 kg Payload: 33,570 kg Gross vehicle weight (GVW): 42,000 kg Body manufacturer: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet current requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website: Nodpfx Asyxn Sxjkcswf

Condition: used, axle configuration: 3 axles, first registration: 03/2013, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2013, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 30%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 9,543 kg Payload: 32,457 kg Gross vehicle weight: 42,000 kg Body brand: Schmitz Cargobull Damages: none Nwjdpfx Aoyxduijkcef = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are immediately ready for operation. From our site in Oldenzaal, we carefully select vehicles that are dependable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 06/2014, loading space length: 13,350 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2014, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 9,045 kg Payload: 32,955 kg Gross vehicle weight: 42,000 kg Body manufacturer: Schmitz Cargobull Damage: none Nedpfxoyxducj Akcewf = Company information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s demands, and fulfill the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: blue, Year of construction: 2015, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 30%; Reduction: single reduction Rear axle 2: Tyre tread: 50%; Reduction: single reduction Rear axle 3: Tyre tread: 40%; Reduction: single reduction Nwjdpfoywf Uusx Akcef Weights Unladen weight: 6,960 kg Payload: 34,040 kg Gross vehicle weight (GVW): 41,000 kg Features Tail lift: DHOLLANDIA 2000 KG Sliding roof: Yes Condition Damages: none = Company information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet current requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2019, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg gross vehicle weight (GVW): 39,000 kg Body brand: Krone Damages: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today’s requirements, and comply with the high standards of our industry. Nedpfx Akjywf Unjcswf Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 06/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2019, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg Gross vehicle weight (GVW): 39,000 kg Body manufacturer: Krone Nwedpfx Akjywf Uhecof Damage: none = Company Information = Heisterkamp Used Trucks BV is more than just a used truck seller – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are trustworthy, meet current requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 50 %, color: white, Year of construction: 2016, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 50%; Reduction: single reduction Rear axle 2: Tire tread: 70%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg Gross vehicle weight (GVW): 42,000 kg Body manufacturer: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and adhere to the high standards of our industry. Nwsdpfjyv H N Djx Akcsf Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 50 %, color: blue, Year of construction: 2017, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 50%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 60%; Reduction: single reduction Unladen weight: 6,960 kg Payload capacity: 34,040 kg Gross vehicle weight (GVW): 41,000 kg Sliding roof: Yes Nwodpeyv Humjfx Akcef Damage: None = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: good (used), Internal item no.: 23045 Electromagnetic chuck Manufacturer: Assfalg 600x300x80 mm 110V Nwjdpfx Aslvrmtekcjf There is a milled recess on the plate approx. 55 mm wide and 4 mm deep.

Condition: used, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 445/45R19.5, tire condition: 40 %, color: black, Year of construction: 2017, Equipment: ABS, Tire size: 445/45R19.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 30%; Reduction: single reduction Rear axle 3: Tire tread: 30%; Reduction: single reduction Unladen weight: 6,530 kg Payload: 34,470 kg Gross vehicle weight: 41,000 kg Sliding roof: Yes Damage: None = Company Information = Nsdpfx Akoyu T Ayscewf Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet current requirements, and uphold the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 06/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 70 %, color: white, Year of construction: 2015, Equipment: ABS, Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 70%; Reduction: single reduction Rear axle 2: Tyre tread: 80%; Reduction: single reduction Rear axle 3: Tyre tread: 50%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg Gross vehicle weight (GVW): 42,000 kg Body make: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: Njdpoyu T Agsfx Akcowf - Website:

Condition: used, axle configuration: 3 axles, first registration: 09/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 70 %, color: white, Year of construction: 2015, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 70%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 70%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg Gross vehicle weight: 42,000 kg Nsdeyu Tz Nopfx Akcjwf Body manufacturer: Schmitz Cargobull Damage: none = Company information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) Nwjdpowzabqefx Akcjf - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: Njdpjwzaiusfx Akcewf - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.