Used Dosing Station for sale (7,256)

Condition: new, DOPAG Micromix Kedpfx Asxcgpzegzefa The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure Kedpfxjibx S No Agzjfa - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Kfjdpfx Ajh Akm Tsgzsa

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Kjdpfxou D E A Ds Agzjfa Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,850 mm, total length: 3,200 mm, total height: 1,900 mm, overall weight: 700 kg, tank capacity: 5,000 l, Diesel Filling Station – 5,000 Litres Diesel – Year of Manufacture 2025 – New For sale is a brand-new, mobile diesel filling station with a capacity of 5,000 litres, built in 2025. This unit is ideal for construction companies, logistics providers, agricultural operations, vehicle fleets, or industrial applications. Equipment & Features: - Tank capacity: 5,000 litres (diesel) - Fuel nozzle for convenient and clean refuelling (12V/24V) - Robust, high-quality steel construction Kfjdpfx Agox I Egxszea - Integrated drip tray (double protection) - Suitable for transport by forklift - Weather-resistant design for outdoor use - New, unused equipment Advantages: - Flexible and on-site refuelling - Save time and costs through self-supply - Ideal for construction sites, company yards, or fleets - Ready for immediate use Condition: New Year of manufacture: 2025 Fuel type: Diesel For enquiries or more information, please get in touch. Viewing possible by arrangement.

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Kfodpfx Agew Ed S Iozja Electronic light control (luminous intensity).

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t Kodpfx Agsvzxpuozefa stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, functionality: fully functional, 400 kVA transformer station, year of manufacture 2019, station UK220-2.9X, transformer DOTUL400/10, year 2013, oil-cooled transformer, 10kV ±2x2.5%/400V, with HV plug-in bushings AK, with LV porcelain bushings, pointer thermometer. Ksdpfx Agjxzq Hbjzefa

Condition: like new (used), Baktec water Dosing machine and chiller In good working condition for more information please sent an request Kfjdpjump Axjfx Agzea

Condition: excellent (used), Year of construction: 2020, Complete cleaning station package : 1x System Cleaners - Manual Satellite TYPE S2 Low Pressure Cleaner 1x stainless steel hose reel approx. 20m with various nozzles and lance 2x stainless steel canister wall bracket S2 is a solid satellite station with high operational reliability The S2 satellite can be used in decentralized and centralized cleaning systems and manages a detergent with the option of adding a separate outlet for another product. It can be used in a pressure range of 3-8 bar for connection to the water mains or 15-40 bar for connection to a boosted water supply from a System Cleaners main station, pump station or booster station. It performs rinsing, foaming and disinfection*. The S2 satellite is protected by a stainless steel cabinet and can either be wall-mounted or mounted on a trolley for mobile cleaning. Features Rinsing, foaming and disinfecting Pressure range: 3-8 or 15-40 bar Up to two chemical inlets for either premixed or concentrated detergents System Cleaners stainless steel needle dosing valve as standard - alternatively click dosing valve or fixed dosing for decentralized chemical supply Hygienic design High-quality materials with high chemical resistance Intuitive operation with mechanical function selector Available for wall mounting or mounted on a trolley Kfsdork D E Ijpfx Agzoa Further devices are available, please enquire Very good condition, see pictures Location is 75053 Gondelsheim Collection or shipping by forwarding agent possible.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Panther, tank capacity: 9,000 l, usable tank capacity: 9,000 l, total length: 4,000 mm, total width: 2,250 mm, total height: 225 mm, overall weight: 1,000 kg, wall material: stainless steel, fuel tank capacity: 9,000 l, Equipment: CE marking, Diesel Refueling Station – 9,000 Liters Diesel – Year of Manufacture 2025 – New A brand new mobile diesel refueling station with a capacity of 9,000 liters, year of manufacture 2025, is available for sale. This unit is perfectly suited for construction companies, freight forwarders, agriculture, vehicle fleets, or industrial use. Equipment & Features: - Tank capacity: 9,000 liters of diesel - Dispensing nozzle for convenient and clean fueling (12V/24V) - Robust, high-quality steel construction - Integrated spill containment basin (double protection) - Suitable for forklift transport - Weatherproof design for outdoor use - Brand new, unused Advantages: - Flexible and location-independent refueling - Saves time and costs through on-site supply - Ideal for construction sites, depots, or vehicle fleets Kfjdpfox I Ea Ejx Agzja - Ready for immediate use Condition: New Year of manufacture: 2025 Fuel type: Diesel If you are interested or have any questions, feel free to contact us. Viewing possible by appointment.

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. Kedpfx Agsq Nxpgjzofa 5. Compact Design: - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm Kfodpfx Agjvuuknszsa ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Kedoxzq Dtjpfx Agzofa

Year of construction: 2021, condition: like new (used), 1.Introduction: 1. This document describes the functional requirements regarding a; 1.1. LC tray degassing chamber 1.2. LC tray degassing chamber is a (controlled vacuum chamber) in which an aluminum tray containing LC liquid is degassed in a vacuum environment during a period of time (i.e. entrapped air is evacuated) Vacuum profiles; 1.1. Pressure set points adjustable between 1.103 and 1.10-3mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points adjustable between 1 and 600min per step 1.2.1. Degassing step (D) can be minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is performed automatically 1.4.1. The vent step (E) must be activated manually (operator) 1.5. Typical degassing profile 2.Interior; 2.1.Stainless steel (aluminum) polished process chamber (inside) 2.1.1. Leak rate to be discussed 2.2. LC-tray (adaptation) drawer to easily (un-)load the LC-tray (no shock/shake movement allowed), see Section 2 LC-tray dimensions and appendix 1 2.3. LC tray must be level (waterpas) at all times to prevent LC spillage 2.4.Chamber must be easily/quickly accessible for cleaning and/or LC tray (un)loading 2.5.Chamber inside must be polished for easy cleaning and prevention of contamination and/or moisture collection 2.6.Monitoring (window) possibility of the degassing cycle i.e. monitoring LC liquid surface behavior in the LC tray 2.7.No process contamination caused by chamber material (-manufacturing) Kfsdpfxowam Sae Agzea

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Kodpfev Abm Ejx Agzefa Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Kjdpfjvz H N Njx Agzofa Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: good (used), The scope of delivery includes: 1x pallet transfer station, used Material color: RAL 5010 Gentian Blue Total height: approx. 2,200 mm Total width: approx. 1,500 mm Currently in stock: 1 unit Ksdpfx Aewaiatsgzofa Your contact person: Mr. Joachim Pollmann Mr. Thomas Barth General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with removal conveyor, transfer station -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable Kfjdpjulp Apefx Agzja -Speed: roller conveyor 20 m/min / conveyor belt 7 m/min -Conveyor rollers. Ø63 x 2500 mm -Drive/gearbox: Nord 0.37 kW with frequency converter, see photos type plates -Lifting: pneumatic -Transport dimensions: 2825/1410/H870 mm -Weight: 580 kg

Condition: used, mileage: 54,125 km, power: 400 kW (543.85 HP), fuel type: gasoline, gearing type: automatic, first registration: 11/2014, next inspection (TÜV): 05/2024, fuel consumption (urban): 17.2 l/100km, fuel consumption (extra-urban): 11.8 l/100km, fuel consumption (combined): 13.8 l/100km, CO₂ emissions: 327 g/km, emission class: euro5, color: white, number of seats: 5, Equipment: air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Equipment package: designo Exclusive, exterior mirror with blind spot assistant, entertainment system in the rear (2 screens), rim design: AMG 5-spoke (matt black), fire extinguisher, luggage compartment cover / roller blind, rear cup holder, rubber mats in the passenger / cargo area, interior: designo carbon trim, load protection net, LM rims 9.5x20, media interface (universal interface for iPod / AUX / USB / MP3), PTS parktronic system (front and rear), tire pressure monitoring system, reversing camera, electric sliding / tilting roof, transmitter for garage door opener (integrated), seat comfort package, Harman Kardon sound system with Logic7 surround system, TV tuner, analog and digital, preparation for mobile phone / convenience telephony / LTE-capable Kfsdpovnnidjfx Agzsa Other equipment: Adaptive brake light, driver / passenger side airbag, ambient lighting, AMG optic/styling package 1, traction control (ASR), leather-covered dashboard, audio navigation system: APS COMAND autopilot system with hard drive navigation including integrated DVD changer, white/bichromatic exterior light, aspherical exterior mirror, left, electric exterior mirror. adjustable and heated, both, bi-xenon headlights, indicator light integrated in the exterior mirror, brake assistant, brake callipers painted red, chrome package, differential locks, automatic switch-on for driving lights, illuminated entry rails (stainless steel), electronic traction system (ETS), stainless steel exterior package, driver assistance system: hill start assist, electric windows front + rear, Alcantara roof liner, interior mirror with automatic dimming, Isofix mounts for child seat on rear seat, body: 5-door, catalytic converter controlled, automatic climate control (thermotronic), head airbag system (windowbag), headrests front NECK-PRO, fender flares, load anchors / lashing eyes, heated steering wheel with multifunction, metallic paint, engine 5.5 ltr. - 400 kW V8 KAT, wheelbase 2850 mm, split rear seat, low emissions according to Euro emissions standard 5, front left seat electrically adjustable (with memory), front right seat electrically. adjustable (with memory), seat cover/upholstery: designo leather 1-color, heated front seats, start/stop system, tinted glass All-wheel drive, ESP, ABS, ECO start-stop function, blind spot assistant, COMAND Online with DVD changer, TV tuner, Harman Kardon® Logic7® surround sound system, navigation system, rear view camera, Parktronic system (PTS), distance assistant DISTRONIC, anti-theft package, automatic climate control, sunroof, heated windshield, ambient lighting, leather interior, leather steering wheel, heated seats for driver and front passenger seats, seat comfort package, multi-contour seat for driver and front passenger, ISIFIX child seat anchors, stainless steel ram protection, side running boards, bi-xenon headlights, ball head trailer coupling / 3500, tire pressure monitoring, aluminum rims, vehicle can be covered with advertising and/or labeled.

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Kedox Itr Nspfx Agzefa Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) Kfedexrpm Uopfx Agzsa C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station Kodpfx Agerv Av Iszofa -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Condition: good (used), Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit Kodpfjrrzfgox Agzsfa -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting Kfjdpfxsb A Hdks Agzoa -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg