Used Dowel Hole Drilling Machine for sale (66,416)

Condition: used, Year of construction: 2007, functionality: fully functional, Machine for drilling holes for dowels URBAN DB 3100, year 2007 Condition: very good - Profile clamping system and drill feed operated by foot switch - Electric drilling motor switches off automatically at the end of the drilling process Codswinq Nspfx Aktjri - Drill feed speed and drilling depth individually adjustable - Quick-clamp chuck for standard drill bits up to max. Ø13mm - Left and right support tables

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Crsdpsvwf N Hefx Aktji

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Csdsvxr Raepfx Aktjri

Condition: used, Year of construction: 1989, with many drills Credevyurcepfx Aktoi used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm Crsdpfx Asvwgagektji required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1980, second hand Make Scheer Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Codjvwfuvopfx Akteri Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops Credpfx Akjxdttiotei - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x1220x1400 mm Weight 275 kg Total power requirement 1,5 kw Cedpfsvz Eibex Akteri

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Credpfxovwf R Rs Aktoi

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 704 mm Boring depth max. 70 mm Motor output 1,5 kW Crsdpfx Aoy Ehzgsktei Weight 310 kg Number of boring spindles 23 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Crodpoy Ehz Hsfx Aktsi Working width 896 mm Boring depth max. 65 mm Motor output 2x1,5 kW Overall size 1122x1040x1250 mm Weight 380 kg Number of boring spindles 29 St.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1100x1350 mm Weight 500 kg Csdpsvz Eizefx Aktsri Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Total power requirement 1,5 kw Credpfx Asvz Er Ajktoi

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 1088 mm Boring depth max. 85 mm Motor output 2x1,5 kW Crjdpfey Ehyvex Aktei Overall size 1320x1040x1250 mm

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Crodpfx Aexc Hi Uektoi Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 units Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Tools: Yes, in mm Drilling direction: from below and from the front Swiveling: Manually Swiveling angle: only 0° or 90° Max. pass-through height: 80 mm Max. pass-through width: 750 mm Number of material clamps: 3 units Type of material clamping: pneumatic Csdpfxsihghro Akteri Design: Stationary Stop system: only for this series Weight approx.: 400 kg Motor power: 1.5 kW Dust extraction diameter: 120 mm Location: Customer

Condition: used, Used Machine Features and Technical Specifications: Codpfozyy Dyox Aktjri - Fully automatic pneumatic control with control panel - Clamping, drilling, and unclamping; electric intermittent operation - Drilling unit: Number of spindles, pitch 32 mm: 23 Speed: 2,800 rpm Motor power: 1.5 kW/380 V Drill chuck for tools with a 10 mm h6 x 20 shank and flat Adjustment range for position settings: 0–60 mm Drill hole depth for drills with a total length of 57 mm: 0–30 mm Drill hole depth for drills with a total length of 77 mm: 0–50 mm Drill hole depth for drill bits with a total length of 95 mm: 0–70 mm - Passage width: max. 800 mm - Clamping height: max. 80 mm - Working height: 850 mm - Space requirement without stop ruler: 1200 x 900 mm - Compressed air connection: 6 bar - Sound level: less than 82 dB(A) - Weight: approx. 400 kg

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display Crjdpfszk N S Usx Aktsi - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Csdpoz Nkutjfx Aktjri Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: used, Second-hand machine Condition: as expected for its age for efficient dowel hole drilling in longitudinal and transverse mouldings for framed doors, door panels Drawer components Crossbars of all kinds Crodszk Ny Sopfx Aktoi 3-spindle motor Spindle spacing 25/25 mm Stroke: max. 80 mm Motor: 1.5 PS Work table 260 x 130 mm Height adjustment from 5–40 mm according to scale with repositionable folding stop Foot valve control NRW

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Crodertrx Ropfx Aktsi Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: refurbished (used), Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Cedpfszlbrvox Akteri Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. Cedpjzgh Tvjfx Aktsri The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Crodefgwlbjpfx Aktoi Manufacturer: TBT / SFT New electrics and new controls!

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - Universal dowel drilling machine with a swiveling drilling unit - With fully automatic control - With 2 safety pneumatic clamps - Drilling gear motor: 2.2 kW with 21 spindles - Spindle pitch: 32 mm Cjdszk N A Tspfx Akteri - With integrated oil damping - Height adjustment: 80 mm - Drilling depth: 80 mm Weight: 420 kg Availability: available shortly Location: Röllbach