Used Drip Pan for sale (3,806)

Condition: good (used), weight 35 kg amount 1 STK tension force 40 kN Rsdjzuplpjpfx Ab Roch Röhm NC Compact Clamp RKK With standard jaws SA and normal jaws SGN—optimized for maximum working precision on CNC milling machines and machining centers with very high working precision. Size 1: Mechanical-hydraulic clamping system. Sizes 2-5: Mechanical- mechanical clamping system. Drive spindle with clamping force presetting, deformation-resistant design for maximum clamping accuracy, mounting thread for workpiece stop, clamping surface for clamping claws, With grease nipples on both sides, all guides subject to wear and the spindle thread can be lubricated quickly and easily—Stable steel base body and all guides are hardened and ground on all sides, Size 1: Long clamping slide with cross offset, hardened on all sides, functional surface ground, Size 2-5:

Year of construction: 1982, condition: used, Sapim Door Panel Line (1982), Panel Dimension Min/Max Length 490/1730mm x 538mm Width, Cycle Time 13 Seconds, Dimension of Sheet Min/Max Length 550/1800mm x 538mm Width x 0.5mm Thickness Rsdjz I Sx Aepfx Ab Roch Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: like new (used), Year of construction: 2018, operating hours: 183 h, load capacity: 1,200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,200 mm, Options: VERY unique CONTRA stacker!! Fully equipped! Features: FFL mast = Full Free Lift, side shift, mast tilt, pantograph, extra wide fork carriage; width = 1230 mm, blue spot & strobe light, lateral battery change system, with cantilever adjustable forklift forks, suitable for all types of pallets, power steering, complete and LIKE NEW! Rodozuubispfx Ab Rech

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes Rsdpfxszuygqj Ab Rsch • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: ready for operation (used), IBR Measurement Technology IMB-dc1 DC voltage converter for input voltages of 9-32 VDC, serial number 00071213, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rcjdozt H Hnspfx Ab Roh

Condition: new, overall weight: 15,000 kg, loading space volume: 37 m³, loading space width: 2,430 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, We offer roll-off containers with a folding net cover in a spar-free design, available to order. ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Type Eco "H" with additional reinforcing band -> new model, reinforced design Thanks to the folding net system, cargo can be secured in 15 seconds. Dimensions: 6500 x 2400 x 2400mm = 36.5 cbm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5mm Walls: 3mm Crossmember: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -Folding net system, semi-automatic Rcjdpfx Aszu Dd Hjb Rsh -> integrated into the top edge -Mesh size 2 x 2mm -Lever mechanism and brackets galvanized -End profile made of special profile, bent -Door lock, Holland + model -Lateral central lock -All-around tarpaulin and net hooks -Ladder rungs on the front -Primed once on the inside, twice on the outside -Painted twice in a single color on the outside, according to the customer's RAL color Optionally available to order: -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Primed twice -Painted twice -All containers have nameplates and a valid UVV inspection certificate.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit Rsdjzvx Shjpfx Ab Roch - 4-bandsaw system Super 40 This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Max. round timber diameter: 58 cm → Debarking up to 42 cm Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. We will gladly send further technical information as well as photos and videos upon request. Inspection is possible after prior appointment.

Condition: used, mileage: 54,400 km, power: 195 kW (265.13 HP), first registration: 07/2023, fuel type: gasoline, next inspection (TÜV): 06/2028, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Storage package, luggage compartment separation (net), rear cup holders, parking assistance package with remote parking assistant, driving assistance system: parking assistant, parking aid plus front, side and rear, acoustic and visual with environment display, Audi smartphone interface, controls with glass optics, incl. extended aluminum look, business package, touring assistance package, driving assistance system: emergency assistant with automatic emergency call, driving assistance system: predictive efficiency assistant, driving assistance system: adaptive driving assistant, exterior mirrors electrically adjustable, heated and foldable, with automatic anti-glare and memory function, exterior mirrors with curb assist, right, Bluetooth hands-free system with voice recognition (Audi Phone Box), parking aid plus front, side and rear, acoustic and visual with environment display, comfort climate control 4-zone, front seat heating, interior mirror with automatic anti-glare function, anti-theft wheel locks, driving assistance system: exit warning, interior trim: interior elements in synthetic leather top and bottom, contour / ambient lighting package (plus), headrests, variably adjustable, fuel tank: 73 liters, lumbar support front, electrically adjustable, light alloy wheels 8x18 (5-arm, for winter tires), metallic paint, new car tire warranty, panoramic sunroof front electrically, rear fixed, spare wheel as emergency spare, seat cover / upholstery: leather / 550 combination, sound system Bang & Olufsen Rjdpfx Asztk Suob Rjch Additional equipment: Airbag on passenger side can be deactivated, airbag driver / passenger side, ambient lighting, Audi connect (internet-based services), Audi connect (emergency call and assistance system), Audi drive select, exterior mirrors, aspherical, left, exterior mirrors, aspherical, right, exterior mirrors, vehicle color, turn signal lights LED integrated in exterior mirrors, headliner, fabric, silver, roof rails, anodized, door sill trims with aluminum insert, driving assistance system: occupant protection system (Audi pre sense basic), driver information system (FIS) with color display, rear seat system (3 seats), windshield with heat-insulating glazing, glossy package, rear lights LED, interior trim: decorative inserts aluminum fragment, Isofix mounts for child seat, body: 4-door, head airbag system (Sideguard), steering column (steering wheel) mech. height / longitudinal adjustment, light alloy wheels, mild hybrid 195 kW (engine 2.0 L - 195 kW 16V TFSI), mild-hybrid technology, multi-media interface MMI Basic Plus / MMI Radio Plus, multi-media interface MMI Navigation, non-smoker package, Otto particle filter (OPF), radio reception digital (DAB), rear seat back split / foldable (40:20:40), low emission according to emission standard Euro 6d, heated windshield washer nozzles, luggage compartment, rail system, side airbags front, seats front manually adjustable, standard suspension, start / stop system, jack, heat-insulating glazing (side / rear)

Condition: used, Year of construction: 2016, Overview This ABE Portable CIP unit is a two-tank clean-in-place system built in 2016 by American Beer Equipment (USA) for craft breweries. A wash tank and a sanitize tank of 150 l each, both electrically heated and temperature-controlled, a stainless steel centrifugal pump and a manual valve manifold are mounted together on one stainless steel frame. The unit is still installed in a craft brewery in Spain, which is ceasing operations. Rcsdpoz Hzgyjfx Ab Rjh Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: Portable 2x150 L - Year of manufacture: 2016 - Machine type: portable 2-tank CIP unit (wash and sanitize) - Tank volume: 2 x 150 l - Operating mode: manual - Electrical supply: 3-phase - CIP pump: Bominox stainless steel centrifugal pump, 2,900 rpm - Water inlet and drain connections: 1-1/2" Tri-Clamp - Tank overflow: 1" tube Equipment - Wash tank and sanitize tank, 150 l each, stainless steel, each with electric heating element and low-level sensor - Control panel with two digital temperature controllers, pump and heater switches and emergency stop - Bominox stainless steel centrifugal pump with valve manifold: recycle, tank outlet and system outlet valves - Stainless steel frame carrying tanks, pump and piping - Operator's and technical manual (English) with electrical diagrams and parts lists Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: used, maximum load weight: 14,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, next inspection (TÜV): 06/2027, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2003, Equipment: ABS, Well-maintained Kögel ZK 18 tandem tipping trailer. Equipment: SAF axles Air suspension Steel sideboards Steel tailgate Rcodpfsz Efdtox Ab Roh Foldable underride guard LED reversing lights Platform at the front wall For any questions regarding the equipment, please call. The tipping body can be painted in your desired color for an additional charge! Errors and prior sale excepted.

Condition: used, Consisting of: "Schomaker" Battering machine, Type SNP 400 all stainless steel belt width 400 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump Redpfx Abez Dvdne Rsch outside dimensions (l x w x h) : ± 2.000 x 750 x 1.700 mm + "GEA" Breading machine, Type EcoBreader 400 all stainless steel breader suitable for standard belt width 400 mm adjustable speed adjustable working height mobile dimensions (l x w x h) : ± 2.500 x 1.000 x 2.100 mm

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise Rsdpjz Hxa Refx Ab Rech -Parallel vise: height adjustable, jaw width 180 x 30 mm -Wingspan: 235 mm -Dimensions: 540/230/H590 mm -Weight: 38 kg

Condition: used, mileage: 525,500 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, Van Hool TX17 Acron Panoramic glass roof 56 seats installed - up to 64 seats possible * DAF engine, 375 kW, Euro 6 * ZF AS-Tronic automatic transmission * Retarder * ESP, ABS, ASR * Emergency brake assist * Lane departure warning system * Adaptive cruise control * 54+1+1 seats with seat belts * Up to 64 seats possible as per approval & CoC (only 54+1+1 currently installed) * Reclining sleeper seats, adjustable longitudinally and laterally, with armrests, leather headrests and side bolsters * Tables, nets, footrests * Automatic climate control * Webasto auxiliary heater * Tour guide seat * Tour guide locker (with water connection, e.g. for espresso machine) * Service sets with individual air vents, reading lights & attendant call button * Enclosed overhead luggage racks * DVD video system with 3 electric flat screens * Additional monitor for the tour guide * Front camera * 230 V power supply * USB sockets at every double seat * Radio, CD MP3, microphone * Ambient LED spot lighting * Panoramic glass roof * 2 roof hatches with glazing * Toilet * Adaptive cruise control * Lifting and lowering system * Reversing camera Rodjyfy Spjpfx Ab Roch * Bluetooth telephony * Bi-xenon headlights * Fog lights * Sleeper cabin * Electric roller blind for windscreen * Electrically adjustable, heated exterior mirrors * On-board computer * Multifunction steering wheel * Air-suspended driver’s seat with 3 cushions, armrests * Separate driver's door * Underfloor vacuum cleaner * Massive luggage compartment with parallel opening lids * Ski box attachment points * ALCOA alloy wheels Viewing possible at any time by prior appointment! All information provided without guarantee. Subject to errors and prior sale! More info: also via WhatsApp) Info in Polish available via WhatsApp) Your French-speaking contact: Georges Spengelin

Condition: used, The MDF-C8V1 VIP ULT chest freezer is a compact -80°C freezer that utilizes VIP PLUS insulation to maximize storage capacity and improve energy efficiency. Its single-compressor auto-cascade system provides higher efficiency in a space-saving design. Key specifications Temperature range: ~-60°C to -80°C (down to -80°C) Capacity: 84 L (3.0 cu ft) Storage: ~42 × 2" cryoboxes Refrigeration: single-compressor auto-cascade (mixed refrigerant) Rcjdpfx Ajzh Ripjb Roh Size and weight External (W×D×H): 550 × 685 × 945 mm Internal (W×D×H): 405 × 490 × 425 mm Net weight: ~67 kg Footprint: ~0.37 m² Features Microprocessor control with digital display and alarms (temperature, power failure) Energy consumption: ~7.2 kWh/day | Noise: ~47 dB(A) Typical applications Storage of DNA/RNA samples, cells, and reagents Small research and clinical laboratories Backup -80°C storage for critical samples

Condition: used, Year of construction: 1990, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: Rcsdpfjzn Ai Isx Ab Rsh MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP PUSHING FORCE 40T Rcedpfsw E Etysx Ab Reh MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr Rodpfx Abow Nq Amj Rjch The machine can be inspected in 71384 Weinstadt near Stuttgart.

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles Rcsdpfxey Nm Ere Ab Rsh - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,000 kg, type of input current: three-phase, input voltage: 400 V, input current: 1,250 A, Complete medium and low voltage system including three 1000KVA 20KV transformers Comprised of: 3x Pauwels transformer 1000KVA 20000V 1x Alstom medium voltage switchgear for incoming ring circuit, 20KV Alstom load disconnect switch tap-off Outgoing measurement, 3x fuse outgoing circuits for 3x transformers 1x Siemens Sikus low voltage switchgear, power supply from 3 transformers, incl. 3 coupling switches for busbar connection Various outgoing terminals NH00 NH1 NH2 For further questions, please contact by phone or email. More pictures and details, nameplates available on request. Redpfx Aoy Hf Umjb Roch Top condition – almost as new – see pictures. Dismantling was performed by an electrical company. All busbar connectors and bolts are included. Internal wiring for power metering has been withdrawn and labeled. Volume: one complete truck, 13.6 ldm, approx. 13,000KG including transformers. Collection only by appointment in 75053 Gondelsheim. A forklift is available for loading. Shipping possible via freight carrier, please inquire with postal code.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 201 S PVC ORTA KAYIT ALIŞTIRMA ( SERİ BIÇAK DEĞİŞTİRMELİ), • Robust mechanical structure capable of processing PVC profiles with high precision • Intermediate profile adjustment for PVC profiles within an angle range of -45 / +45 degrees • Easy blade set replacement system • Easy angle adjustment with mechanical supports Redpezd Nyfefx Ab Roch • Adjustable support system for all types and brands of profiles • Cutting speed adjustment with a hydropneumatic system • Blade storage rack (for 3 blades) • Max. processing diameter: 160 mm • Max. blade size: 200 mm • Min: 90 mm

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern for milling machines. Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 milling pattern – 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 milling pattern – 660 EUR Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 milling pattern – 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 milling pattern – 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 milling pattern – 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2800 EUR Round magnetic clamping plates of this type with a diameter of 200-800 mm. Rcodpfxjzd Rlve Ab Roh

Condition: used, mileage: 20 km, power: 210 kW (285.52 HP), first registration: 06/2026, fuel type: electric, overall weight: 3,275 kg, color: blue, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,032 mm, total height: 1,987 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Internal number: 4034.VFW26.TL75155 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Trailer coupling, electrically swiveling * Heated steering wheel * Adaptive Matrix LED headlights - LED low beam including all-weather lights * Glare-free LED high beam * LED daytime running lights * Integrated LED turn signals in front - LED cornering lights, static - Speed-dependent headlight range control - LED rear lights * Exclusive package - panoramic roof * Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) * Ambient lighting * Technology package 6: Exterior mirrors with turn signals, electrically adjustable, heated and foldable * Audio system 13: Multifunction display, Ford SYNC 4 including navigation, blind spot assist, rear collision warning with braking, pre-collision assist, camera and radar-based driver drowsiness warning, lane keeping assist, lane departure warning, lane change assist, traffic sign recognition, wrong-way driving warning, front and rear parking pilot system * Adaptive speed control Stop&Go * All-round camera * Sensico leather-look steering wheel * Non-opening panoramic roof * B&O sound system with 15 speakers and up to 1000 watts * Ford audio system with multifunction display and Ford SYNC 4 including navigation - Digital radio reception DAB/DAB+ FordPass Connect - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink (wireless) - Amazon Alexa built-in voice assistant - Navigation system * Wheels: 7.5 J x 19 light alloy wheels in sport design in matte black with 235/50 R19 111/109T tires FURTHER EQUIPMENT * 2 grab handles on the driver and front passenger side * 2-stage unlocking for passenger compartment and cargo area, prevents locking of open doors * 3 USB ports for the 2nd row of seats * ABS * Storage compartment in front * Airbag, front passenger side - with airbag deactivation function * Airbag, driver side * Exterior mirror housings in vehicle color * Battery: H7 AGM single battery * Brake light, third * Roof, flat * Roof console * Anti-theft alarm system with interior monitoring * Power windows, front * Parking brake, electronic Rsdpfx Aeymicysb Rjch * Ford Key Free system - incl. Ford Power start function (keyless locking/unlocking and starting) * FordPass Connect - 5GModern WLAN hotspot - Information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass app - Current traffic information in real time (in conjunction with navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices), - Further information on FordPass Connect can be found at / * Windshield, heated * Floor mats: Carpet floor mats, front * GT stripes on the hood, lower front bumper and tailgate - incl. side decorative stripes * Speed limiter 150 km/h * Transmission: 1-speed direct drive * Glove compartment with lockable lid * Rear window, heated * Rear window wiper * Rear swing door * Rear spoiler * Interior lighting in the passenger compartment * Interior lighting in front * Automatic climate control, 3-zone * LED rear lights * Charging cable for public charging station (Type 2) - 3-phase - Length 5m * Charging station, inductive, in the center console, for mobile devices * Center console, large * Emergency assist * Picnic light * Tire repair kit *

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Rcsdsy Sux Sjpfx Ab Rjh Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder Redpfx Ajy R Ty Eeb Rjch - Scoring station - Nipping and pressing station - Lay down device Transport system Müller Martini 3520 Year: 2008 - Transport system, length (approx): 8 mtr Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Rodpfx Aeyx Et Heb Roch Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.