Consulting buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
Wing bar tables"(with cable connection) by Ophelis (7 units available). Get a wing standing table incl. 2 x consulting module is firmly fixed (without wheels) 2 x reflector on a pole Total length approx. 2700mm Approx. 700mm wide Vah9bvjog Height 247 cm incl. reflector Cost 2.666.-per piece The object of the purchase is used, the sale takes place under exclusion of warranty. more
6
**SPECIAL OFFER: FREE OPERATOR TRAINING COURSE IF MACHINE SOLD IN FEBRUARY** ***MACHINE AVAILABLE TO END USER CUSTOMER ONLY*** S20 CNC FAVORIT, 400mm CENTRES X 100mm, MARPOSS LENGTH POSTIONING UNIT, TABLE SWIVEL 15 DEGREES, SWIVELLING WORKHEAD, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16 T WITH PICTOGRAM PROGRAMMING, VERY WELL MAINTAINED..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER. WE ARE SPECIALIST ONLY IN STUDER MACHINES FO... more
8
Open side coordinates drill; Manufacturer WMW Mikromat Dresden, model: BKoE 315 x 500; Specifications: table size 315 x 500 mm, maximum load 100 kg, adjustment speed 52/160/400/1000 mm / min; Drill feeds up / down 0.006/0.025/0.055/0.22 mm / Rev; Friction feed up / down 0.5 mm/Rev; Spindle stroke 100 mm core diameter 80 mm tool holder MK 3. Speed range with 19 steps (45-2,800 RPM); Workspace table: longitudinal adjustment 400 mm, lateral adjustment 250 mm; height adjustment spindle stock 360 mm... more
5
used, very good condition Hhu7pr9pu 1 x Frabat 5 PzS 775 battery built in 2015-48 V incl. charger manufacturer: Frabat Type: 5 PzS 775 Year of construction: 20/2015 Nominal voltage: 48 V Capacity: 775 Ah Trough size: approx. 1210 x 415 x 860 mm equipped with water filling system (AquaMatic) incl. VARTA charger 48v / 170 A Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
8
Ref.-Nr. 00498 Description Balancing machine – balancer Made Gebr. Hofmann KG Maschinenfabrik Darmstadt Model BD F1 2ab Year of made Year unknown - does not appear on the nameplate In 2011, the entire control system was renewed worth 12,500 euros Bcpwnwxvy9 Balancing Machine KG Capacity 10-1000 Control data: Manufacturer Hofmann Model MC 10 tension 1/PE/N 230V frequency 50 Hz current 4A power 3kVA face 50kg control voltage 24V DC fuse 16 A a cupboard full - ve... more
4

Hydr. Feeder WABAMA HZV 12/100 - 500

Menden, GermanyGermany dealership location
6442 km
2011
good (used)
Stroke: Max 500 mm. Material thickness: 0.5-12 mm. Material width: approx. 100 mm. Incl. hydraulic system with control Xhmaz9o Thrust and clamping force: 20.000.N Operating pressure: 180 bar Feed weight: approx. 450 kg. ABM. L x W x H: 2250 x 750 x 1400 mm. The feed can be visited in consultation under power and demonstrated, and is immediately available. Please also my other listings. more
4
x-travel 600 mm y-travel 400 mm z-travel 400 mm control Fanuc MSG 501 MAPPS number of spindle speeds 12000 min-¹ spindle drive 18,5/15/11 kW rapid travel x/y/z 42 mm/min table-size 700 x 450 mm tool changing time 1 sec tool magazin: 40 x BT 40 total power requirement 27,7 kW weight of the machine ca. 6,74 t M3z7r 1 chip conveyor This vertical gantry machine is extremely sold and stable and in excellent condition. It hasn coolant through spindle interface. Interface for coolant through sp... more
8
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY*** WE SELL-RENT-BUY-OPERATOR TRAINING-GEOMETRY CHECKS-SERVICE ONLY STUDER MACHINES WITH 40 YEARS STUDER EXPERIENCE. 650MM CENTRE DISTANCE x 175MM HEIGHT, EXTERNAL WHEEL 500MM, ACTIVE LENGTH POSITIONING, MOVOMATIC IN PROCESS GAUGE READY, ELECTRONIC WHEEL BALANCING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 21i T, GRANITAN BASE GRINDING MACHINES FOR RENT..... *****GRAN... more
6
Milling machine - conventional; Manufacturer: Beaver machines, model VBRP MK2; Table size: 1,400 mm x 250 mm; Travel: X-axis: 820 mm, Y-axis: 400 mm, Z axis: 400 mm; rotation speed continuously variable 50-3,000 rpm.; Milling head tilting and turning; Quill stroke: 130 mm; drill feed Quill: from 0.05 to 0.1 mm / Rev; Toolholder SK 40; Feed: 15-320 mm / min; Rapid traverse 2rafj3 more
4
ebraucht of bearing resolution 1 x cast iron table base - TOP! -Industrial quality. State / variation possible. 2q97we A total of 12 pieces available - price is for 1 piece! Total height: 920 mm Gesasmtbreite: 510 mm Feet per Lxw: approx. 200 x 145 mm Surface: Lxw: 510 mm x 120 mm Weight: approx. 50 kg each Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more


consulting
daily

New machines via email!

Stay updated!
7
Ref.-Nr. 00497 Description NC – lathe Hersteller Heyligenstaedt Model Heynumat 5 UK / 800 Year of made 1997 Control Siemens 840C Turning length 800 mm tailstock Quill diameter 100mm Quill 140mm ZMD = tailstock end adjustment 1111mm Z1FD 93mm machine sizes TWS right Bcpwiutweo Max. Circulation diameter over bed (in front of the TWS disks) 640mm Max. Circulation diameter over bed sled 450mm Max. Turning diameter 330mm Max. Resonant circuit of the tools 640 mm Parts ... more
3

Hacksaw KASTO EBS 320 A

Menden, GermanyGermany dealership location
6442 km
1970
good (used)
Saw diameter: 320 mm. Blade length: 575 x 52 x 2.5 mm. Incl. automatic material feed, hub: 1 640 mm Quantity counter 1-1000 and cooling plant. Weight: approx. 1200 kg. The machine can be seen in consultation under power and is immediately available. Please also my other listings. Btuk0j7 more
13
 Start Chat

Short screwdriver Index ABC42

More Index Abc 42
Fellbach, GermanyGermany dealership location
6664 km
1995
reconditioned (used)
used index ABC42 with 840C control all wear parts have been checked or replaced (guided tours of KTG, etc.) Mufpho All hydraulic and coolant hoses are new. Conversion to digital pressure switch Almost all cable new Housing has been set C1 and C4 axis with thread cutting without compensating Chuck S3 spindles HIBO (block with gear driven 2 stations, driven like in G200) More HIBO stations such as series (blocks see pictures) Unimag interface Clamping pliers set for synchronous spindle ... more
15
RENT OR BUY USED STUDER S35, S36 FAVORIT, S40CNC, S20CNC FAVORIT, S25, S33, ECO 650, S30 LEAN PRO, S145, S20-2, S40-4, S40-2 WE BUY ANY GOOD USED STUDER CNC FROM YOU. GOOD STUDER FOR SALE/WANTED... STUDER OPERATOR TRAINING, STUDER SERVICE, STUDER INSTALLATIONS, STUDER GEOMETRY CHECKS, STUDER GRINDING COURSES Bb9jrw7i9z STUDER EXPERIENCE SINCE 1984 AFFITTASI O ACQUISTO RETTIFICATRICE IN TONDO USATE ESTERNI/INTERNI PRONTO CONSEGNA STUDER S35, S36 FAVORIT, S40CNC, S20CNC, S25, S33, ECO 6... more
6
Spark erosion machine, manufacturer: Nassovia Krupp, model FE 501-D, built in 1971, technical details / accessories / additional: Control: conventional; Length 400 mm, table width 250 mm; traverse path X/Y: 300/200 mm; operating voltage 380 V 50 H; Machine weight approximately 1,590 kg, dimensions: machine: approx. 1.270 x 1,650 x 2,500 mm; hydraulic power unit: approx. 680 x 370 x 590 mm Ib37bnb Scope of delivery: EDM machine; Switch - / control cabinet; Hydraulic power pack more
15
For sale comes from a change of the production: 1 x Serra robot welding of algae / welding machine Year of construction: 2003 Control: Siemens S7 315-2DP with Siemens TP270 touch panel Scope of delivery: 2 x ABB IRB 6400R M2000 point welding robot 2 x ABB IRB 1400 M2000 arc welding robot 1 x expert rotary table with four positions 2 x Fronius TransPulsSynergic 4000 welding equipment div. clamps on rotary table Embossing unit with horizontal and vertical movement Gripper and dis... more
2

copy and coordinates nibbling machine Trumpf CN 700

Bad Homburg v.d.Höhe, GermanyGermany dealership location
6557 km
good (used)
Wbh7jfbn Ref.-Nr. 00461 Description copy and coordinates nibbling machine Made Trumpf Model CN 700 Year of made unknown Working area 2000x1000mm Power 4mm sheet Technical information See below Technical condition Good Delivery date Immediately more
2
Traverse paths: X = 500, Y = 200, Z = 400 mm. Spindle retainer: SK 40 Spindle speeds: 40-2000 RPM Feeds in all axes: 10-1500 mm / min. Rapid traverse in all axes: 1,5 m / min. Includes box router table, horizontal Milling spindle. M8jxh Universal Swivel Head with boring Quill, Machine vise, div. toolholders, Coolant system and documentation. Weight: approx. 1200 kg. The machine can be seen in consultation under power and is immediately available. Please also my other listings. more
6
 Start Chat

Doppelspindler Chiron DZ 12

Fellbach, GermanyGermany dealership location
6664 km
2005
good (used)
Chiron DZ 12 year 2005 with 2 spindles and range Machine has 5 axles at short notice available M2ijx more
15

STUDER CNC S33 PRONTA CONSEGNA FRITZ STUDER AG S33

DERBY, United KingdomUnited Kingdom
5796 km
2003
ready for operation (used)
---MACHINES AVAILABLE TO END USER CUSTOMERS ONLY--- WE HAVE S33 AND CAN OFFER AS OPTIONAL INSTALLATION, ON SITE STUDER OPERATOR TRAINING, STUDER SERVICE AND OFFER WORLDWIDE STUDER MACHINE FOR SALE-RENT-BUY-GEOMETRY CHECKS MOVOMATIC-MARPOSS GAUGES, RENISHAW LP2 LENGTH POSITIONING, SENSITRON AIR GAP ELIMINATOR, FANUC-SIEMENS, GROSSENBACHER CONTROLS WITH 40 YEARS STUDER EXPERIENCE ON STUDER MACHINES S35, S36, S40CNC, S20CNC, S25, S33, ECO 650, S30 LEAN PRO, S145, S20-2, S31, S21. WE OFFER ONLY USE... more
9

2 - axles - lathe - machine OKUMA LB 15 II

More Okuma Lb 15
München, GermanyGermany dealership location
6847 km
1991
good (used)
CNC lathe, manufacturer OKUMA, model LB 15 II, control OSP 5020 L, built in 1990/91, commissioning 1993; 2-axis lathe; Rotation range to 340 mm; swing diameter over cross slide/bed 340 mm, Z axis travel 260 mm, stroke X-axis 520 mm, main spindle spindle diameter 200 mm; spindle diameter in front bearing 100 mm; hole diameter in the spindle 62 mm, programmable speeds 45-4,500 rpm ; Maximum torque 334 NM; Power 15 KW; Hjci2qf90 Equipment and accessories: SAMECA bar loader type: SAM 65; Turre... more
9
used, good condition from plant disassembly 1 x Bosch conveyor / transfer system consisting of: Gvnreo Bosch drive station 3842998040 Bosch conveyor 3842999810 Chain conveyors transport length: approx. 2900 mm Chain conveyors transport width: 640 mm Roller conveyor transport length: 640 mm Roller width: 660 mm Roll center distance / roll Center: approx. 110 mm engine data: 230 / 400 V 0.55 kW 1400 / 1600 rpm i: 40.61 Price is plus VAT free loaded bearing casting Changes ... more
6
KUNZMANN vertical machining center BA 1000 with control HEIDENHAIN iTNC 530 (with special equipment) Clamping table, full cab, tool changer 32-fold chip spiral conveyor, spindle cooling, precision wedge shoes Including the following additional facilities: 1 piece coolant through the tool 1 piece hinged belt chip conveyor 1 piece Abstandscodierte linear path measurement systems 1 piece electronic Handwheel HR 410 1 piece of retrofit Kit for TS 640 probe 1 piece TS 640 probe 1 piece o... more
Solar Taurus 60 S T7901 gas fired Btt8fbf 6.000 hours after installation more
6
 Start Chat

Rotary milling center Index C42

Fellbach, GermanyGermany dealership location
6664 km
2005
good (used)
Index C42 Control Siemens 840 d All stations are powered by 3 revolver X/Y/Z Chuck diameter max 160 mm Turning length 600 mm Main spindle maximum RPM 6300 min/1 Power 20 / 27 KW Spindle passage 42 mm C axis with TRANS with function Counter-spindle maximum RPM 6300 min/1 Mxs0l Drive line 20 / 27 KW Spindle passage 42 mm C axis with transit function Accessories: Documentation Chip conveyor Bar feeder Irco Profimat Part catcher 3 x driven tool holders (2 x 90 degrees, 1 x... more
7
"B" AXIS 1 DEGREE range -15/+225, 1000MM CENTRE DISTANCE x 175MM HEIGHT, 2 EXTERNAL WHEELS 500/400MM, INTERNAL GRINDING, ACTIVE LENGTH POSITIONING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16T. MACHINE AVAILABLE TO END USER CUSTOMER ONLY WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC GRINDING MACHINES FOR RENT..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTALLATION... more
4
Manufacturer DMG, model DMU 70 eVolution, built in 2000, 5-axis, control HEIDENHAIN, work area (x - y - z) 750 x 600 x 520 mm, C-axis: +/-360 degree B-axis 180 degrees, spindle hours approx. 1,000 hours (spindle was replaced); Spindle speed 18,000 rpm Max.; Additional equipment: 60 tool locations (HSK 63), 3-D-probe, chip conveyor, IKZ - indoor air, Hiesfjlee more
9
used from Commons resolution 1 x JHT MKS 1500/P DW hydraulic crane (Hydraulic is empty, must be filled are) Year of construction: 2005 Capacity: 1500 kg Max lifting height: 3000 mm Neyuf 4 x Extract Distance between the chassis approx. 1000 mm Space Lxwxh: CA. 2200 x 1190 x 1950 mm Weight: 250 kg Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
4

Universal console milling machine INDUMA 2045 SMB / 8

Menden, GermanyGermany dealership location
6442 km
1978
good (used)
3 axis digital display Traverse paths: X = 1250, 370 = Y, Z = 500 mm. Spindle speed, vertical: 40-1500 rpm. Spindle support, horizontal and vertical: SK 50 Vsduxm Feed: 10-800 mm / min in all axes Rapid traverse rate: 2500 mm / min in all axes Router table surface: 1700 x 350 mm. Incl. Universal Swivel Head with drilling tailstock, div. W. recordings, Cooling plant machine vise and documentation. Weight: approx. 3500 kg. The machine can be seen in consultation under current visit... more
4
Solar Titan 130 Solonox 11.8 MW dual fuel V09jh2j 4.000 hours 50 Hz Immediately as exchange unit or as package possiible together with boiler and steam turbine more
6
x-travel 510 mm y-travel 510 mm z-travel 510 mm control MSC 803 table-size Drehpalette 2x 750x550 mm table load 2 x 200 kg rapid travel x/y/z 42 / 42 / 32 m/min feeds x/y/z -stepless 10000 mm/min tool magazin: 25 tool changing time 2,2 / 3,2 sec max. tool diameter 100 mm Czjcod2wy max. tool weight 6 kg spindle speed: 8000 1/min spindle drive 11/7,5 kW max. torque on the spindle 48 Interface for coolant through spindle form A total power requirement 22,5 kVA weight of the machine ca. 3,9 t ... more
11
---MACHINE AVAILABLE TO END USER CUSTOMER ONLY--- 600MM GRINDING WHEEL, IEMCA LOADER, WHEELHEAD 30 DEGREES +/- 8.5 DEGREES, SENSITRON, MOVOMATIC (AS NEW) IN PROCESS GAUGE, VERY LOW WORKING HOURS WITH ONLY 19,000 HYDRAULIC ON HOURS, 2 TROLLIES WITH VARIOUS PALLET TRAYS TO FEED LOADER, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC.... V2zgdj WE BUY - SELL - RENT - SERVICE ONLY STUDER MACHINES DIRECT TO/FROM CUSTOMER. WE ARE ALWAYS LOOKING TO BUY G... more
9

cycle-lathe machine OMAP FMS 250

86675 Buchdorf, DeutschlandGermany
6768 km
1997
excellent (used)
Cycle lathe machine, manufacturer OMAP, type FMS 250, control Fagor, y/c 1997, excellent condition, 3-jaw-chuck, quick relase iron bracket, cooling liquid kit, distance beetween centers 1000 – 1500 – 2000 mm, center height over bed slideway 250 mm, wide of bed slideway 330 mm, cutting diameter over bed slideway 500 mm, cutting diameter over slide 300 mm, cross side impulse x-axe 250 mm, diameter spindle drilling 77 – 105 mm, tail spindle diameter 60 mm, tail spindle swing 180 mm, weight approx. ... more
12
used from plant disassembly 1 x Happel GKF cable conveyor belt / conveyor belt Year of construction: 2008 Fördermaße Lxw: 2950 x 1200 mm Working height: approx. 1000 mm Engine: 230 / 400 V Cij83lpu 1380 / 50 rpm i: 27.50 0.37 kW Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
1

laser cutting machine Bystronic Byspeed 3015

More Bystronic Byspeed 3015
Bad Homburg v.d.Höhe, GermanyGermany
6557 km
2002
ready for operation (used)
Ref.-Nr. 00445 Description Used laser cutting machine with Byloader 3015 Made Bystronic Model Byspeed 3015 Year of made 2002 Pv9pnru Control Working area 3000x1500mm Power 4000 Watt CNC 96 Working hours ca. 18.10.2017 37.000 h Lasercutting hours ca. 18.10.2017 19.500 h with Byloader 3015 with exhaust equipment With chiller + 1 x water pumps for cooling (2000 Euro) + 1 x sealing set for resonator (650 Euro) + 1 x filter set suction Revisions Februa... more
1
15.000 hours since new in 2005 Vx97ps9 standby, best condition, boiler possible. more
 Start Chat

Turning milling Index G200

More Index G 200
Fellbach, GermanyGermany dealership location
6664 km
1996
reconditioned (used)
Used index G200 with 840C control HSP42 GSP42 with C-axis transmit on both spindles Turret 1 VDI25 14 stations all powered X/Z revolver 2 VDI25 14 stations all powered X/Z Portalabnemeeinrichtung Unimag interface new chip conveyor Machine is checked electrically and mechanically cleaned with machine acceptance. Nffkx more
4
400MM CENTRES X 100MM, MOVOMATIC LP/DIAMETER UNIT, TABLE SWIVEL 15 DEGREES, HEAVY DUTY WORKHEAD AND TAILSTOCK, SENSITRON GAP ELIMINATOR, FINE TAPER ADJUSTMENT, FANUC CNC, OIL MIST EXTRACTOR AVAILABLE, VERY WELL MAINTAINED..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTALLATION,TRAINING, SERVICE. WE ARE SPECIALIST ONLY IN STUDER MACHINES SINCE 1984 Frehmfc PRECISION CYLINDRICAL GRINDING MACHINES FOR RENT. ---MACHINE AVAILABLE TO END USER CUSTOMER ON... more
8

Waermetauscher1 THERMI CONSULT THERMIPACK

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
THÉRMI CONSULT Bcqodsvyuo more
15
1x HAAS / MIKRON VCE 1250 vertical machining center with Haas Control and electronic handwheel scope of delivery: HAAS / MIKRON machining center technical documentation chip conveyor coolant device 4 machinery feets equipment: Haas Control - 9.39N preparation for 4. axis 20x tool changer 1x electronic handwheel programmable coolant nozzles Renishaw optical signal transmission - for workpiece adjustment / control technical details year or manufacture: 1997 control: Haas ... more
6

sandblasting system Wheelabrator Berger Schlick ST 100

Bad Homburg v.d.Höhe, GermanyGermany dealership location
6557 km
2011
good (used)
Ref.Nr. 00463 sandblasting system Description sandblasting system Made Wheelabrator Model Schlick ST 100 M8ru9 Year of made 2011 Plant was dismantled last week by specialist company, originally the plant was to be built in another plant. Now they have made a different decision and the system should be sold at short notice and must immediately out of the hall. Technical condition Shortly before disassembly one worked with the plants Delivery immediately (Original price in 2011 s... more
1
Solar Taurus 70 S dual fuel 4.000 hours Bcss092ilc Immediately as exchange unit or as package together with boiler and steam turbine more
 Start Chat

Turning milling Index G200

More Index G 200
Fellbach, GermanyGermany dealership location
6664 km
2002
reconditioned (used)
Used index G200 with 840C control HSP60 GSP42 with C-axis transmit on both spindles Turret 1 VDI25 14 stations all powered X/Z/Y/W revolver 2 VDI25 14 stations all powered X/Z Portalabnemeeinrichtung Unimag interface new chip conveyor Bcsftgtigu Machine is checked electrically and mechanically cleaned with machine acceptance. more
10

milling center Fehlmann Picomax 82-M

Bayern, DeutschlandGermany
6811 km
1996
excellent (used)
Manufacturer: Fehlman; Model: Picomax 82 M CNC; Control: HEIDENHAIN TNC 426; Built in 1996; Hours of operation 35.950; Spindle adjustable: 50 - 16,000 rpm; Tubings, longitudinal - transverse - vertical: longitudinal movement of the clamping table automatically (X - axis) 700 mm, transverse movement of the clamping table automatically (Y - axis) 315 mm; vertical movement of the cutting head automatically (Z-axis) 540 mm; Table: size 1,230 x 410 mm; table load of 250 kg; 4 controlled axis can be ... more
4
Package of used grinding machines for sawing and planing machines We sell the following grinding machines in the sales order Selling as a package to bid, simply us your price suggestion email -Saegeschaerfautomat Iseli type AS the sharpen circular saw blades for straight and helical cut with Special helical cut Year of construction: 1991 Motor: 380 V Advance Variator with inverter -Band saws cabinet maker VOLLMER AT Planer knife grinding machine Bäuerle for blades up to 700 m... more
13

Punching and bending Centre Salvagnini S4 + P4 mit Tivox Regalystem

Margaretenhütte 57, 35398 Gießen, DEGermany
6540 km
1992
excellent (used)
used, very good condition from production: 1 x Salvagnini S4 + P4 plate machining line - TOP condition with TIVOX NC plate shelf system hours of operation: approx. 55,000 / h Plant produces casting still - available expected from June / July - 2018 from stock P4-2520. SFELS. LI.PB. T.DL.CLA. US5R10 Max length of the input panel: 3000 mm Max width of the input panel: 1500 mm max rotating diagonal of the Board: 3000 mm maximum bending length: 2540 mm max height of Kant: 207 mm min. sh... more
3

Wire bend cutting machine Macsoft FX 13 G8

Spessartstrasse 40, 61352 Bad Homburg v.d.Höhe, DEGermany
6557 km
2003
excellent (used)
Ref.Nr. 00455 Description Used CNC controlled wire bending machine Made Macsoft Model FX 13 G8 Year of made 2003 • • 1 motorized electric reel with 2t capacity • • 2 levels in 2 levels with rolls for wire diameter from 8-12mm • • 2 levels in 2 levels with rolls for wire diameters of 4-8mm • • 1 motorized slot, numerically controlled with wheels for wire diameter 10 & 12mm • • 1 numerically controlled bending head with 6 axes and integrated cut (NC) • • 1 control cabinet incl. •... more
7

STUDER CNC STUDER AG S40-4

DERBY, United KingdomUnited Kingdom dealership location
5796 km
1990
ready for operation (used)
****MACHINE AVAILABLE TO END USER CUSTOMER ONLY**** PLEASE SUBMIT YOUR BEST OFFER + FULL COMPANY DETAILS HIGH PRECISION UNIVERSAL GRINDER S40-4 UNIVERSAL CYLINDRICAL GRINDER WITH 2 EXTERNAL WHEELS + INTERNAL SPINDLE, SIEMENS 3G CNC, EXTRA WIDE 150MM WIDE WHEELS MOUNTABLE ON LEFT OR RIGHT, PROFILE WHEELSHAPES, SENSITRON, 650MM CENTRE DISTANCE x 125MM HEIGHT, SWIVELLING TABLE AND WORKHEAD 90 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, MARPOSS IN PROCESS GAUGE AND LENGTH POS... more
 Start Chat

Turning milling Index G200

More Index G 200
Fellbach, GermanyGermany
6664 km
2004
excellent (used)
Used index G200 with 840C control HSP60 GSP60 with C-axis transmit on both spindles Turret 1 VDI25 14 stations all powered X/Z revolver 2 VDI25 14 stations all powered X/Z Portalabnemeeinrichtung Unimag interface new chip conveyor Hkb89kr Machine is checked electrically and mechanically cleaned with machine acceptance. more
11

Spark erosion machine Exeron 313 MF

München, GermanyGermany dealership location
6847 km
2006
good condition (used)
Spark erosion machine tools with AWEX changer and Zeiss Vista CMM with Renishaw probe changer incl. spare magazine SCR 200 type: Exeron 313 MF Traverse paths: X = 620 mm, 420 mm = Y, Z = 400 mm, C = yyy; Workpiece clamping plate: 1,000 x 600 mm (T-slot grid), Bowl L x B: 1,070 x 670 mm, height of liquid: Max 400 mm, table burden: maximum 1,500 kg electrode weight: max 50/250 kg, pulse generator: EroForm 60 A, control EXMF 10 (IPv6), filter system: Back wash filter 49 litres, filling quantity: ... more


consulting
daily

New machines via email!

Stay updated!

to

to

Edit search
CONSULTING
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close