Used Driver Disk for sale (9,232)

Condition: refurbished (used), Year of construction: 2017, operating hours: 5,065 h, load capacity: 2,000 kg, lifting height: 2,010 mm, fuel type: electric, mast type: duplex, construction height: 1,452 mm, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are overhauled according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, as well as the drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and receive advice on site – we will find the right solution for you. Ffsdpfxjwzt Epo Afneu Industrial Truck Specifications Manufacturer: Jungheinrich Model: 119 201 ZT - Ride-on Stacker Drive type: Electric Load capacity: 2,000 kg Lift height: 2,010 mm Load center: 600 mm Year of manufacture: 2017 Operating hours: 5,065 hours Mast type: Duplex mast Fork length: 1,200 mm Overall height: 1,450 mm Own weight: 1,197 kg Battery voltage: 48 V C5 capacity test: 24V 375Ah (test protocol supplied upon delivery) Charger voltage: 48 V (available on request) Attachments: Special features: Tires front: Polyurethane Tires rear: Polyurethane

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Front dimension: Ø 90 mm -Recording: see photos -Total dimensions: Ø 110 x 315 mm -Weight: 8.5 kg Fsdpfx Aorv Au Hofnsfu

Condition: good (used), driver's seat, forklift seat, tractor seat, tractor seat Fsdpfx Aox Ivrxefnofu -Manufacturer: Klepp, driver's seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 380 mm Fedpjb A Iqqsfx Afnjfu -4 jaw chuck -threaded mount -Weight: 40 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck Fedeb A Iuyepfx Afnjfu -Mouth size: Ø 560 mm -Short taper mount: Ø 122 mm -Bolt circle: Ø 170 mm -Weight: 100 kg

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum Fedpfewy Uyxox Afnefu • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Ffedpfx Aowzahdsfnsu Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm Fjdpfxsdfv Ile Afnefu -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8" 1 1/2" -Through hole: Ø 84 mm -Weight: 56 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 320 mm Fsdsb A Ih Ajpfx Afnsfu - Mounting thread: Ø 60 mm inside -Weight: 30 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Feed size: Ø 450 mm Ffedpfxeb A Rddo Afneu -4: Jaw chuck -Receptacle: Thread -Internal thread: Ø 69 mm -Weight: 40 kg

Condition: good (used), End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 Fjdpfxsx H Ip Hs Afnefu -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Condition: ready for operation (used), Panasonic DV47M02AVXAA P356-02AVXAA Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Fjdpfx Afei Eccfenjfu

Condition: ready for operation (used), Agie MJG 2119 A Zch 615072.6 + Step motor driver REX MJG 2113 A 629753.5, used, normal signs of wear, 100% functional Fjdpei D Twwjfx Afnsfu

Condition: ready for operation (used), AGIE 622064.4 Step Motor Driver Isotorque MJG2129E , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Ffjdei D Tvgepfx Afnju

Condition: ready for operation (used), Panasonic Panadac 337N-01 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Fedpfji Eccmox Afnsfu

Condition: ready for operation (used), AGIE Isotorque Driver 622064.4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Ffjdji D Twaopfx Afneu

Condition: ready for operation (used), Agie MJG 2129 D Step motor driver . 622064.4, used, minor signs of wear, 100% functional, scope of delivery as per photos Ffjdpfx Aji D Twzefnou

Condition: ready for operation (used), Panasonic DV47N100MDG / P326L-100MDG Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Ffjdpfji Eccijx Afneu

Condition: new, Omron R88D-UP04H AC Servo Driver, Serial No. 406910-10-60 95.03, unused in original packaging, 100% functional Ffodpfxji Ecbzj Afneu

Condition: ready for operation (used), Panasonic Panadac 337N-02 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Ffjdpfx Aoi Eccqjfnju

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck Ffjdpfsb A Sbpex Afnou -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 -Bolt circle: Ø 204 mm -Weight: 80 kg

Condition: good (used), Paint module Gun Driver Module -Type: Spraymation 305910-2 Fjdpfx Aeb A Rk Tsfnefu -50 VDC Price: per piece Quantity: 2 available -Weight: 0.8 kg

Condition: good (used), axle configuration: 2 axles, first registration: 04/2019, loading space length: 13,690 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: red, Year of construction: 2019, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Ffedpfx Afsx Sdwqensu Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.803 kg Carrying capacity: 26.197 kg GVW: 33.000 kg Functional Make of bodywork: Schmitz Cargobull Plywood Box Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, This listing is for a Qiagen Rotor-Disk Heat Sealer The Rotor-Disc Heat Sealer is used to seal Rotor-Discs for the Rotor-Gene Q. Rotor-Discs do not use caps. Instead, Rotor-Disc Heat Sealing Film is applied and sealed using the Rotor-Disc Heat Sealer. The film prevents contamination by providing a strong, durable, and tamper-proof seal. Fedpfexzhkqex Afnefu

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: blue, Year of construction: 2015, Equipment: ABS, tail-lift, Axle configuration Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Weights Unladen weight: 6,960 kg Payload: 34,040 kg gross vehicle weight (GVW): 41,000 kg Functional Tail lift: DHOLLANDIA 2000 KG Sliding roof: Yes Condition Damage: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet current requirements, and adhere to the high standards of our industry. Details Fjdpex Rukrofx Afnsfu - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website: