Used Durma Press Brakes for sale (197)

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7336127126 - Operating hours: 25000 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-880S Kodowmf Efspfx Agzjnf - Power [kW]: 18.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 175 - Max. working width [mm]: 4050 - Column gap [mm]: 3600 - Max. stroke [mm]: 255 - Control type: DNC 880S - Control: CNC - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Knodovfy Sxspfx Agzjf Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2000, total length: 3,700 mm, total width: 2,000 mm, total height: 2,750 mm, Weight: 8.500 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No Kedpfx Ajw Igwqogzjnf - Serial number: 752200069 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-80 - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 120 - Max. working width [mm]: 3000 - Column gap [mm]: 2600 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 80 - Control type: Cybelec DNC-80 - Control: CNC - Transport dimensions: 3700mm x 2000mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Kjdpfx Agsv Rtg Tezjnf Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: excellent (used), Year of construction: 2018, Very neat used press brake from Durma Type AD S 40320 Capacity 4050 x 320 tons Delem DA 69T control CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 (3D back gauge) Hydraulic Wila NS upper and lower clamping Kedpfsx I A Efox Agzjnf CNC crowning

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 7360 Measurements depth 6750 mm Measurements height 2310 mm Machine weight 12960 kg Control Unit Brand SIEMENS Model Sinnumeric 840 Movement X-Axis Movement 2500 + R mm X-Axis Rapid Traverse 100 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 75 m/min Max Material Thickness Steel 6 mm Stainless steel 3 mm This Durma TPL93 turret punch press was manufactured in 2019. It's a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information. Application Types Kedpfx Asx D I Nlsgzenf Punching

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,300 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, working width: 1,200 mm, Technical Details: General Information Manufacturer: Durma Model: E 1240 Year: 2008 Application: Bending Machine Type: Hydraulic Press Brake Number of Axes: 4 Kodpfexzi Nbsx Agzsnf Control Unit: CYBELEC DNC 880S Capacity & Movements Bending Length: 1200 mm Stroke: 160 mm Machine Dimensions Depth: 1500 mm Height: 2400 mm Weight: 2900 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, The machine is in good technical condition, after previous agreement the possibility of testing. Knedpfx Asxyvz Iegzsf

Condition: excellent (used), Year of construction: 1996, stroke length: 160 mm, pressing force: 120 t, Hydraulic press brake Fab. DURMA Typ. HAP 30120 Year 1996 Technical details Make: DURMA Type: HAP 30120 Year of construction: 1996 Capacity: 120 tons Effective length: 3050 mm Stroke: 160 mm Engine power: 11 kW Dimensions: L 4,150 x W 1,950 x H 2,600 mm Weight: 7.5 tons Equipment - Controlled backgauge - Immersion depth adjustable via control - Controlled axes: X, Y - 2 support arms - Technical documentation - Tools: Ksdpfx Agju Iarbozjnf o Multi-V die V12, V20 (slightly damaged), V13, V16, V45, V15, V10, V65 Length 3,050 mm o Slightly cranked upper tool, H 150 mm, L 2,970 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 2015, condition: excellent (used), Used modern Axe and Status DURMA AD-R 30175 3metre x 175ton cnc pressbrake for sale Model: AD-R 30175 3050 x 175 Make: Axe and Status DURMA AD-R 30175 Year 2015 Popular Cybelec DNC 880S cnc control Working length mm: 3100mm / 3metre Max. press force kN: 1750 / 175ton 2 axis back gauge – R and X axis Kodpfx Agsiztghezonf 4 axis in total Max.stroke mm: 265 Wila crowning system Euro tooling tool clamps Weight kg 1050

Condition: good (used), functionality: fully functional, Year of construction: 2018, Full-option CNC press brake from Durma Model: AD S 40320 Capacity: 4100 x 320 tons Delem DA69 3D graphical control Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC-controlled Wila hydraulic upper and lower clamping Wila crowning system Knedpfx Aox Ivnmogzef Akas Fiessler laser safety Year of manufacture: 2018

Condition: new, Year of construction: 2024, Bending capacity: 60t Bending length: 1250 mm Distance between uprights (mm): 1050 Material thickness: 7.5 mm Stroke length (mm): 265 Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec.): 10 Motor power (kW): 7.5 Operating speed X (mm/sec.): 250 Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard equipment: Y1, Y2, X, R (4 axes) X = 650 mm X, R Control unit: DURMA DT15 European clamping system 60 mm die holder (only for European dies) Throat depth: 410 mm Backgauge: Siemens DC servo-driven, linear guide & ball screw system Protective cover Special accessories: European upper tool P97.75.R08 (one in segmented design) European lower tool M.460R.85 (one in segmented design) DURMA quick clamping system CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our Staufenberg location. Further information available upon request. Knsdpfx Aod E If Ssgzef

Condition: good (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, controller manufacturer: cybelec, bending force (max.): 175 t, working width: 4,050 mm, distance between stands: 3,600 mm, number of axes: 6, overall weight: 12,500 kg, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Durma AD-S 40175 Press Brake Pneumatic clamps Distance between columns: 3,600 mm Number of axes: 5 175.0 tons Max. working width: 4,050 mm Year: 2007 Kjdexqyidspfx Agzonf

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC 880, bending force (max.): 175 t, working width: 3,050 mm, stroke length: 265 mm, installation height: 530 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, number of axes: 4, table height: 900 mm, type of crowning: CNC-controlled, oil tank capacity: 200 l, travel distance X-axis: 650 mm, back gauge adjustment: CNC-controlled, back gauge travel distance R-axis: 250 mm, overall weight: 11,250 kg, total length: 4,570 mm, total width: 2,360 mm, total height: 2,900 mm, power: 18.5 kW (25.15 HP), Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, electro-hydraulic CNC press brake - Two synchronized cylinders with HIGH PERFORMANCE hydraulic components - Equipped with CYBELEC CNC control unit - DNC 880S - * 2D graphic display for visualization and multi-stage simulation * Graphic 2D programming * User-friendly operation * Automatic bending sequence calculation and collision detection * Extensive product and tool library * Automatic tonnage (pressure) calculation Ksdpfx Agexlizxszsnf - Swiveling operator panel mounted front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - Upper beam with heavy-duty four-guide system - CNC electric backgauge (X axis) * with 2x manually adjustable backgauge fingers * Adjustment range up to max. 650 mm - CNC electric height adjustment of backgauge (R axis) * Adjustment range up to max. 250 mm - CNC electric table crowning - AMADA/PROMECAM upper tool clamping * incl. segmented upper tool set - AMADA/PROMECAM lower tool holder, incl. die * incl. segmented single-V die (V=20 mm) - FIESSLER LASER safety device at the front - 2x front, movable support arms (sliding system) - Side safety enclosure (pivoting doors) - Rear safety enclosure (pivoting door) - 1x movable foot switch - Large hydraulic oil tank to maintain low operating temperature - Original operating manual

Year of construction: 1993, condition: ready for operation (used), A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible. Knodpfexguc Rsx Agzof

Condition: used, Year of construction: 2004, pressure 80 t throat 515 mm connected load 11,0 kW Kodpfxjvki Dus Agzonf stroke 70 mm 640 x 550 mm no. of strokes 38 Hub/min hole diameter in sheet thickness mm weight of the machine ca. 1,95 t dimensions of the machine ca. 1,6 x 1,55 x 1,9 m ith a wide range of accessories See pictures

Condition: good (used), functionality: fully functional, Year of construction: 2016, Used Durma CNC press brake Type: AD Servo 30175 Capacity: 3050 x 175 tons Cybelec ModEva 15T CNC control CNC-controlled Y1, Y2, X and R axes CNC crowning Kodpfxjx Iflzs Agzsnf Akas Fiessler laser safety Includes tooling set

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Knodovwm A Iepfx Agzof Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7532000080, Offer 25092 Technical specifications: Knsdpjv Tli Ejfx Agzef - Working width 3500 mm - Pressure capacity 160 t - Clearance between columns 3100 mm - Table width 405 mm - Throat depth 260 mm - Installation height approx. 240 mm - Ram stroke 180 mm - Working height approx. 870 mm - Motor power approx. 15 kW - Oil capacity approx. 300 l - Space required approx. W 3800 x H 2750 x D 2100 mm - Weight approx. 11500 kg - With: - Swivel arm - Control panel with CYBELEC CNC control - Y 1 + 2 ; X ; Z - Motorized backgauge up to 620 mm - Manual crowning WILA - 4-way universal die + pointing tool - Two-hand control panel with foot switch - Support arms

Condition: good (used), functionality: fully functional, Year of construction: 1992, Used 3-meter press brake by Durma (Knuth license) Model: APH 30120 Capacity: 3100 x 120 tons 1 set of tools Year of manufacture: 1992 Electric depth adjustment + electric back gauge Knedpfxextp Afe Agzof

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Knodpfxoff Hvlj Agzef Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm Knodpfx Agjfir U Nezef R Axes travel distance: 250 mm X axis distance: 750 mm Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Ksdpfsi Da Syex Agzenf Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Kjdpfx Agefifg Hezenf Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Press brake AD-S 40220 | 4 meters 220 tons Everything can be configured on request, very short production and delivery times. We will be happy to send you further information on request. Technical data: Bending capacity: 220 tons Bending length (mm): 4050 Passage between uprights (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Projection (mm): 410 Table height(mm): 900 Table width(mm): 104 Y Rapid traverse (mm/sec.): 160 Y Working speed(mm/sec): 10 Y Retraction speed(mm/sec.):140 X axles working speed(mm/sec.): 250 R axes working speed (M): 140 R axes travel distance: 250 X axes distance(mm): 650 Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment Control system: CNC Cybelec ModEva 19T CNC controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Ksdpsfirx Defx Agzjnf Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes backgauge: X1,X2,R1,R2,Z1,Z2 Control unit: DELEM DA-66T Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Manual or motorized central lubrication Air conditioning for control cabinet