Used Dust Extractor for sale (4,988)

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg Nlsdpfjd Tir Iex Ancef

Condition: good (used), Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm Nsdpfjfd Hffjx Ancslf -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Nljdpjhkztwsfx Ancsf Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Nedpfx Ansxnprcscjlf Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Suction nozzle diameter: 160mm Maximum volume flow: 2000 m³/h Nominal volume flow: 1448 m³/h Volume flow monitoring: pressure difference display Negative pressure: 3000 pa Filter area: 10.5 m² Residual dust content: less than 0.1 mg/m³ Nledev Drqwjpfx Ancof Sound pressure level: 64 db Chip bag volume: 160 l Filter cleaning: pneumatic Motor power: 3 kW Machine length: 1800 mm Machine width: 820 mm Machine height: 2220 mm Weight: 320 kg

Condition: excellent (used), Dust and mist extractor IMAS Nlodpsyw Hrbefx Ancof

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Nlsdpfjytn Tdox Ancjf Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Nedpfxsxn Tile Ancelf Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing Nledpfjwwt Aasx Ancjf - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Nljdpepfat Nsfx Ancof Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Nedpfx Ajxnqausncjlf Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 2012, Centrifugal fan, dust extractor, fan, suction, dust blower, blower -Motor: Ziehl-Abegg ECblue .1R -Speed: 1580 rpm -Connection: input Ø 240 mm Nedpfx Anefiqrfecelf -Connection: output Ø 450 mm -Dimensions: 995/815/H1060 mm -Weight: 148 kg

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Nljdpecdr Enefx Ancjf Subject to prior sale.

Condition: used, Year of construction: 2026, The CORMAK FM230 Dust Collector is a professional dust extraction system designed for small and medium-sized woodworking workshops. Featuring a compact design, 1,000 m³/h airflow capacity, and a standard 230 V power supply, it efficiently removes sawdust, wood chips, and fine dust without requiring costly electrical upgrades. Equipped with a durable WhirlWind metal impeller and a mobile wheeled base, the FM230 combines reliable performance with high build quality for everyday workshop use. Key Features High extraction capacity of 1,000 m³/h – effectively removes sawdust, chips, and dust from woodworking machines. Standard 230 V power supply – plugs into a conventional mains outlet without electrical modifications. WhirlWind metal impeller – provides stable operation, excellent durability, and resistance to heavy workloads. Mobile wheeled base – allows easy movement around the workshop using robust bearing-mounted wheels. Sealed filtration system – efficiently separates dust particles, helping maintain cleaner workshop air. Ø100 mm extraction inlet – compatible with most woodworking machines and extraction hose systems. Construction and Technology The FM230 is equipped with a multi-blade steel impeller engineered for high airflow performance while maintaining relatively low operating noise. The machine is mounted on a sturdy mobile frame, making it easy to reposition even in confined workshop spaces. The dust collector features two heavy-duty bags—a filter bag and a collection bag—manufactured from durable materials that provide excellent airflow while maintaining effective filtration. A quick-release clamping system allows fast bag removal and replacement without the need for tools. Performance and Efficiency Nodozpx A Hspfx Ancelf The CORMAK FM230 woodworking dust collector is highly effective at extracting dust directly from machines such as: Panel saws Surface planers Thickness planers Spindle moulders Tenoning machines With an airflow capacity of 1,000 m³/h, the FM230 maintains a clean working environment even during intensive woodworking operations. Weighing just 27 kg, its compact footprint makes it an excellent choice for workshops where space is limited. Applications The FM230 is ideal for: Professional and hobby woodworking workshops Joinery and furniture production Cutting, routing, planing, and sanding wood-based materials Machines equipped with Ø100 mm extraction ports Mobile workstations requiring a portable dust extraction solution Standard Equipment Fabric filter bag Waste collection bag WhirlWind metal impeller Mobile base with wheels Bag mounting clamps Optional Equipment Flexible Ø100 mm extraction hoses Y-connectors and reducers for multiple machine connections High-efficiency filter bags Noise reduction silencers Technical Specifications Specification Value Motor power 0.75 kW Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,020 Pa Noise level 70 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,500 mm Width 420 mm Length 600 mm Power supply 230 V / 50 Hz Weight 27 kg IMPORTANT NOTICE!!! This machine is a customer return. BAGS ARE NOT INCLUDED. NO WARRANTY.

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Njdpfxsyibg Ts Ancslf Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM230 Dust Collector is a professional dust extraction system designed for small and medium-sized woodworking workshops. Featuring a compact design, 1,000 m³/h airflow capacity, and a standard 230 V power supply, it efficiently removes sawdust, wood chips, and fine dust without requiring costly electrical upgrades. Equipped with a durable WhirlWind metal impeller and a mobile wheeled base, the FM230 combines reliable performance with high build quality for everyday workshop use. Key Features Nledpfx Anjvu Az Ujcef High extraction capacity of 1,000 m³/h – effectively removes sawdust, chips, and dust from woodworking machines. Standard 230 V power supply – plugs into a conventional mains outlet without electrical modifications. WhirlWind metal impeller – provides stable operation, excellent durability, and resistance to heavy workloads. Mobile wheeled base – allows easy movement around the workshop using robust bearing-mounted wheels. Sealed filtration system – efficiently separates dust particles, helping maintain cleaner workshop air. Ø100 mm extraction inlet – compatible with most woodworking machines and extraction hose systems. Construction and Technology The FM230 is equipped with a multi-blade steel impeller engineered for high airflow performance while maintaining relatively low operating noise. The machine is mounted on a sturdy mobile frame, making it easy to reposition even in confined workshop spaces. The dust collector features two heavy-duty bags—a filter bag and a collection bag—manufactured from durable materials that provide excellent airflow while maintaining effective filtration. A quick-release clamping system allows fast bag removal and replacement without the need for tools. Performance and Efficiency The CORMAK FM230 woodworking dust collector is highly effective at extracting dust directly from machines such as: Panel saws Surface planers Thickness planers Spindle moulders Tenoning machines With an airflow capacity of 1,000 m³/h, the FM230 maintains a clean working environment even during intensive woodworking operations. Weighing just 27 kg, its compact footprint makes it an excellent choice for workshops where space is limited. Applications The FM230 is ideal for: Professional and hobby woodworking workshops Joinery and furniture production Cutting, routing, planing, and sanding wood-based materials Machines equipped with Ø100 mm extraction ports Mobile workstations requiring a portable dust extraction solution Standard Equipment Fabric filter bag Waste collection bag WhirlWind metal impeller Mobile base with wheels Bag mounting clamps Optional Equipment Flexible Ø100 mm extraction hoses Y-connectors and reducers for multiple machine connections High-efficiency filter bags Noise reduction silencers Technical Specifications Specification Value Motor power 0.75 kW Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,020 Pa Noise level 70 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,500 mm Width 420 mm Length 600 mm Power supply 230 V / 50 Hz Weight 27 kg

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Nodpfjylb Ixox Ancjlf Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Good condition. Ready for work. Nlsdpfey Af Rgsx Ancef

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of Cloth Bags for Dust Extractors Dimensions: Ø500 × 850 mm Designed for the following dust extractor models: CORMAK FM300 Nlsdsy T Hbhopfx Ancef CORMAK FM300S The set includes two cloth bags: one upper bag with a mounting handle for installation on the top of the dust extractor, and one lower waste collection bag.

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition model – new Nlsdpfscdrzdjx Ancjf Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Vacuum: 2280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from Bitburg warehouse Subject to prior sale.

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Njdjxpximopfx Ancslf Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: good (used), Clean air extraction system Njdpfjrb D Nex Ancjlf Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Nodszcqxuspfx Ancslf Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07 Nlodpfxswzyh Rs Ancef

Condition: used, Technical specifications: Nlsdpfx Anozhuf Ijcof Filter bag diameter: 6 x 600 mm Collection bag diameter: 6 x 600 mm Dust extraction port: 300/250 mm Power supply: 380 V Motor speed: 2800 rpm Motor power: 5.5 kW Overall dimensions: Length: 4700 mm Width: 1100 mm Height: 1100 mm