Used Compact Dust Collector for sale (8,939)

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Bwedpfovg U Dxox Anpew Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: used, Year of construction: 2022, Operational units. Multiple available. Ask for spec and quotation! Bwsdpsyi Uzasfx Anpew

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Bwjdpfezq A Ezox Anpsw Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: used, Used industrial dust extraction system, complete with a Dynair 7.5 kW fan, electrical control panel, and filtration unit. No disassembly required. Available immediately. Complete system as shown in the picture. Located in Rotterdam, the Netherlands. Bwedpsz Rpltjfx Anpew Delivery: EXW Rotterdam. Worldwide inquiries are welcome. Additional information and photographs are available upon request.

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Bjdpfx Anjk Ea Uuepsww

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Bwsdjv Azfzepfx Anpjw

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM340 230V Dust Collector is a modern dust extraction system designed for efficient and quiet dust removal from woodworking machinery in workshop and light industrial environments. Equipped with a 1.5 kW single-phase motor and a large dynamically balanced metal impeller, it delivers an impressive 3,200 m³/h airflow capacity while operating from a standard 230 V power supply. It is an ideal solution for users looking for a compact, mobile, and reliable dust collector for sawdust, wood chips, and fine dust. Key Features Powerful 1.5 kW / 230 V motor – provides stable, high-performance operation without requiring a three-phase power supply. Airflow capacity up to 3,200 m³/h – efficiently extracts sawdust and dust from multiple woodworking machines simultaneously. 300 mm dynamically balanced impeller – ensures smooth, quiet, and vibration-free operation. Heavy-duty steel housing and metal impeller – designed for durability, rigidity, and long service life. 180° rotating inlet head – allows flexible positioning of extraction hoses to suit various workshop layouts. Mobile wheeled base – makes it easy to move the unit between workstations. Quick-release bag mounting system – enables fast, tool-free replacement of collection bags. Construction and Technology The CORMAK FM340 230V woodworking dust collector features a large metal extraction fan housed in a robust steel casing that provides excellent structural rigidity and durability for intensive daily use. Its 180° rotating inlet head allows the air intake to be positioned for convenient hose routing in different workshop configurations. The unit is supplied with a fabric filter bag and a 190 L plastic collection bag, allowing long operating periods before emptying is required. Performance and Efficiency With a motor speed of 2,850 rpm and a 300 mm impeller, the FM340 delivers powerful, consistent airflow and highly effective separation of sawdust and dust particles. The dust collector easily handles machines that generate large volumes of waste, including: Sliding table saws Thickness planers Spindle moulders The versatile extraction system offers either: Bwedpfxovu Aykj Anpsw One Ø150 mm extraction inlet, or Three Ø100 mm extraction ports providing maximum flexibility when configuring workshop extraction systems. Applications The FM340 230V is ideal for: Woodworking workshops Furniture manufacturing facilities Educational woodworking laboratories Professional and hobby workshops requiring powerful dust extraction from a standard 230 V power supply Standard Equipment One fabric filter bag One plastic collection bag Transport wheels Extraction inlet configuration: Ø150 mm or 3 × Ø100 mm Optional Equipment Ø100 mm flexible extraction hoses (various lengths) Galvanized hose clamps Additional plastic or fabric collection bags Technical Specifications Specification Value Motor power 1.5 kW / 230 V Motor speed 2,850 rpm Maximum airflow capacity 3,200 m³/h Maximum vacuum pressure 1,900 Pa Noise level 70 dB Impeller diameter 300 mm Extraction inlet Ø150 mm or 3 × Ø100 mm Collection bag capacity 190 L (500 × 1,100 mm) Overall dimensions (L × W × H) 985 × 560 × 2,210 mm Weight 45 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200P Sawdust Extraction System – Reliable and Compact Workshop Dust Collector The CORMAK DC2200P sawdust extraction system is a robust and compact woodworking dust collector designed for intensive operation with milling machines, saws, and planers. Thanks to its compact design and high suction performance, it is an excellent choice for small and medium-sized woodworking workshops requiring a reliable sawdust extraction fan. Main Advantages of the Machine Extraction capacity of 2200 m³/h – effective removal of chips and dust even during intensive operation. 2.2 kW / 400 V motor – reliable three-phase power supply with high torque performance. Compact design – saves workshop space while maintaining strong suction power. Stable and durable metal housing – resistant to mechanical damage and industrial working conditions. Mobile base – easy movement of the unit thanks to the integrated wheel system. Design and Technology The DC2200P is equipped with a balanced metal rotor mounted in a durable steel housing, ensuring smooth and vibration-free operation. The quick-release bag and filter mounting system allows for fast replacement, while the sealed construction ensures effective retention of contaminants within the extraction system. The 125 mm inlet diameter enables connection to standard dust extraction systems. Precision and Work Efficiency The reliable CORMAK DC2200P dust collector provides a consistent airflow, effectively removing dust and sawdust without the risk of backflow. The unit delivers high performance while maintaining a low noise level, improving operator comfort during daily use. Bjdsvuzt Njpfx Anpsww Applications The CORMAK DC2200P is suitable for: Woodworking workshops – extracting chips from milling machines, planers, and table saws. Wood processing plants – dust and chip extraction from individual workstations. Training and technical workshops – a safe and efficient solution for maintaining a clean working environment. Hobbyists and craftsmen – a compact sawdust collector for demanding users. Standard Equipment Fabric filter bag Waste collection bag Mobile base with four wheels Optional Equipment Ø125 mm extraction hose Quick-mount hose clamps Technical Specifications Parameter Value Extraction capacity 2200 m³/h Bag diameter 500 mm Inlet diameter 125 mm Motor power 2.2 kW Power supply 400 V / 3 phase Dimensions 1160 × 605 × 750 mm Weight 50 kg

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Bwodpfxoryxmxs Anpew Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143 Bwedjzdddyjpfx Anpew

Condition: used, Year of construction: 2015, Manufacturer: Donaldson Model : TDP450 Year : 2015 Bwodpfxszz Thnj Anpew Type : Dust collector Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Power : 3 kW Required pressure: 6 bar 2 new Ultra Web filters Cleaning filters using compressed air Dimensions: 100 x 130 x 290 cm Weight : 350 kg

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Bwjdpfxozi Rkce Anpjw Mechanical cleaning of filter bags Return channel for cleaned air

Condition: ready for operation (used), Year of construction: 2013, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Bwjdpfxsgny Agj Anpew See photos!

Condition: new, Year of construction: 2022, 2 dust bags Bedpfey N N Ipjx Anpjww mobile construction motor 3kW

Condition: good (used), Year of construction: 2004, The used filter dust collector Infastaub MKR 4/20 - 4/20 RO or industrial cassette filter, is a high-performance filter system for efficient process air dedusting. Thanks to its two-stage configuration, the system is perfectly suited for critical and fine dusts – such as pharmaceutical dusts in the particle range of 1 to 10 µm. The integrated rotational cleaning (RO) ensures constantly low differential pressures and maximum service life in continuous industrial operation. Name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year built: 2004 -Max. volume flow: Up to 6,000 m³/h -Filter area: Total 160 m² (80 m² in the 1st stage + 80 m² in the 2nd stage) -Number of chambers: 4 chambers -Filter classes: Stage (cleanable): H13 (HEPA – 99.95% separation efficiency) Stage (safety stage): H13 to U15 (ULPA – up to 99.9995% separation efficiency) -Residual dust content: values down to < 0.001 mg/m³ -Max. operating temperature: +80 °C -Cleaning: pneumatic via compressed air pulse (approx. 6 bar compressed air pressure) -Dimensions (approx.): length 3,800 mm × width 1,150 mm × height 2,300 mm -Net weight: approx. 4 tons -Voltage: operating voltage 400V / 50Hz, control voltage 24V DC -Material: stainless steel -Raw gas collecting duct ∅ D6: 315 mm, M6: 700 mm -Technical doc.: Yes -Accessories: Control -Condition: Used-good Bodpfxjmzat Hs Anpsww -Price: On demand

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use Bwjdpov Sk Tmofx Anpow For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Bwodpfx Anjvzqtxepjw Heavy-duty steel construction designed to withstand vibration and intensive industrial use Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg

Condition: used, Year of construction: 2000, functionality: fully functional, This Dustomat-63 Bjdpfx Ajxakdksnpjww - Suction nozzle Ø: 160 mm - Main motor: 3 kW - Item description: mobile, CE-mark, 3 kW, Ø=160 mm - Filter cleaning - Mobile separator container - Rated volumetric flow: 1,850 m³/h

Condition: reconditioned (used), Rated motor power 2.2kW/5.2A Rated voltage 380V / 50Hz / ~3Ph Rated volume flow 1350 m³/h Rated negative pressure 2850 PA Main switch + start and stop Manual filter cleaning Suction nozzle 140 mm Bsdpfov Azcyjx Anpjww 1 container diameter 800 mm

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Bodpfx Anex A Exujpoww Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: excellent (used), a) Ref. VAC-1) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 150) Bjdpfxszx Eile Anpjww - Total air flow rate: 40,000 CFM (67,960 m³/h) b) Ref. VAC-2) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 250) - Total air flow rate: 60,000 CFM (101,940 m³/h)

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Bodpoz A Tl Tefx Anpeww Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 sawdust extractor with dust filters is a machine designed for intensive use in woodworking facilities. It combines a compact design, high performance, and an advanced filtration system that effectively removes chips, sawdust, and fine dust from workstations. Thanks to the use of third-stage dust filters, the extractor minimizes airborne dust, directly improving operator safety and working comfort. Main Advantages of the Machine Extraction capacity of 4560 m³/h – fast and effective removal of sawdust and chips from up to four machines simultaneously Dust filters – highly effective at trapping fine particles and reducing airborne dust in the work area Steel impeller – a balanced component ensuring vibration-free and quiet operation 3.8 kW three-phase motor – provides high power and stable suction pressure 6 bags with a total capacity of 600 l – extended operating time without the need for frequent emptying Connection to up to 4 workstations – maximum functionality for multi-stage operations Adjustable feet and a stable frame – precise leveling and safe operation on uneven surfaces Construction and Technology The CORMAK FM350 woodworking dust extractor is built on a reinforced, powder-coated steel frame. The filtration system consists of 3 dust filters and 3 waste bags, each with a capacity of 200 liters. The bags are secured using robust steel clamps, ensuring quick replacement and easy maintenance. The 300 mm diameter steel impeller provides smooth operation and ensures the durability of the machine, even under intensive working conditions. Precision and Performance The FM350 operates with an extraction capacity of 4560 m³/h, maintaining stable suction performance thanks to an impeller speed of 2950 rpm. Four suction connections (1 x 180 mm + 4 x 100 mm) allow several woodworking machines to be connected simultaneously, making the unit an ideal solution for serial production and service workshops. The dust filters effectively remove fine dust particles that are often not captured by conventional filter bags. This significantly improves air quality and reduces the risk of dust accumulation and clogging in machines. Applications The CORMAK FM350 chip extractor is recommended for use with: milling machines, planers and thickness planers, band saws and panel saws, wide-belt and drum sanders. It is suitable for both production facilities and medium-sized woodworking workshops where effective dust extraction and occupational health and safety are priorities. Standard Equipment 3 dust filters 3 waste bags with a capacity of 200 l each Connection manifold: 1 x 180 mm / 4 x 100 mm Adjustable feet Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Bsdpfxsz A Tv Ee Anpjww Parameter Specification Extraction capacity [m³/h] 4560 Bag volume [l] 3 x 200 Number of bags 6 (3 filter bags + 3 waste bags) Suction connection diameters [mm] 1 x 180, 4 x 100 Dimensions (L x W x H) [mm] 2355 x 590 x 2150 Weight [kg] 125 Motor power [kW] 3.8 Power supply 3-phase, 400 V Manual (DTR) yes CE Declaration Yes

Condition: used, Year of construction: 2009, Fabricant : WAM Modem ATEX : FPXHTD12VA1498 Year : 2009 Type: Atex horizontal dust filters Bedox R D Hijpfx Anpoww ATEX: ExII3D135°C(T4) Suction fan: 2.2 kW Separation type: Filter sleeves Filtration surface area: 12 m² Purging solenoid valve   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: new, Year of construction: 2026, Capacity 8,900 m³/h Motor power 7.5 kW (10 HP), 3,000 rpm Air velocity 32 m/s Filter dimensions Ø160 x 940 mm Number of filters 42 units Filtration area 21 m² Bwjdjz I Scuepfx Anpjw Chip collection Big bag (1,250 liters) Inlet diameter Ø300 mm Dimensions 1,210 x 2,550 x 3,520 mm Weight 540 kg Operating temperature -20°C to 40°C