Used Dust Filter System for sale (41,740)

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Dwodoxl Elgjpfx Apwsa

Condition: ready for operation (used), Year of construction: 1998, A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Dwsdpeyfv N Dsfx Apwea

Condition: used, machine/vehicle number: 0940, without hall piping Dedpfxjrz Iq Hj Apwjwa

Condition: used, filterintermediate filter/sparging filtervacuum unitsuitable for container feedingused, good condition,manufactured by  ALKOlength 1400 mmwidth 1400 mmheight 3000 mmsuction- /blow in connecting piece D 2 x 250 mmcoveringwith discharge / fan ca. 2,0 KW D 160 mmair recirculation possiblewith fans 2 piece2 x 2,0 kWdiameter D 250 mmlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Dedpfovxa N Dox Apwjwa

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Dwodow Avl Ujpfx Apwja

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary change table and 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 ABB IRC5 control unit with Tech-In panel HF milling spindle PERSKE model KRS 35.3-2, power: 1.2 kW, speed: 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight: 380 kg Table size (Table 1) with aluminum plate: 500 x 500 mm Table size (Table 2) with Pertinax plate: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete system is set up as a compact milling cell with a rotary change table - Control cabinet and robot controller cabinet are both compactly and solidly mounted on the milling cell - Motorized rotary indexing table (likely WEISS brand) with fixed indexing step: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - While one side of the rotary table is being milled, the other side can be loaded with new workpieces in parallel - Front safety guard with light barrier for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge machining, milling cut-outs, drilling, etc. Also suitable for plastic processing or similar applications. If interested, please request a video from us. Dwsdjyaq Nuepfx Apwea

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation Dsdpfozrw Dbex Apwowa - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Djdpjznibwsfx Apwewa Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Dsdoun Sd Ujpfx Apwjwa Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Dwjdpfx Aozi N Dhopwea Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Condition: used, Adept Robot System, Industrial Robot, Used Machine Dimensions: Length: 1250 mm Width: 520 mm Height: 1860 mm Manufacturer: Adept Robot System Dwjdpfx Apjwm Hnbjwoa Model: Cobra 800 Type: SCARA (4-axis) Maximum reach: 800 mm Rated payload: 2 kg Maximum payload: 5.5 kg Repeatability (XY): ±0.017 mm Repeatability (Z): ±0.003 mm Repeatability (Theta): ±0.019° Protection class: IP65 Year of manufacture: 2003 (according to label) Special features: Outstanding precision and speed Integrated servo amplifier and controller (space-saving design) Conveyor tracking and vision system integration capability Easy calibration with absolute encoder Optional IP65 protection (dust and waterproof design) Summary: The Adept Cobra 800 is a high-performance, compact SCARA robot designed for fast, precise, and flexible industrial automation tasks. With a maximum reach of 800 mm, payload capacity of 2–5.5 kg, and excellent repeatability, it is an ideal solution for assembly and material handling operations.

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm Dwedpfxowypqle Apwea - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Compact self-cleaning industrial filtration unit designed for the extraction and filtration of dry dusts and fume particles in continuous operation. Suitable for industrial applications such as grinding, sandblasting, welding, laser engraving, and machine processing. Condition: used. Dodpfx Aoy Sbrxopwswa Manufacturer: HFILTRATION S.r.l. Model: PC MINI Machine Type: Industrial Cartridge Filter Unit Condition: used Filter Type: Self-cleaning Cartridge Filter Application Area: Dry Dust Filtration Filter Cleaning: Pulse-jet compressed air cleaning Filtration Efficiency: below 5 mg/Nm³ Cartridge System: BGIA-certified filter cartridge Cartridge Height: 600 mm Dust Collection Container: 15 liters Compressed Air Connection: 3/4" F GAS Required Compressed Air Pressure: 5 to 6 bar Maximum Compressed Air Pressure: 6 bar Compressed Air Consumption: approx. 40 Nm³/h Electrical Configuration: with fan and motor protection switch Motor Protection: magnetothermal circuit breaker Voltage: 400 V ±10% Electrical Protection Class: minimum IP54 Operating Temperature: -10 °C to +40 °C HEPA Filter: optional H13 or H14 Applications: grinding, blasting, cleaning, welding fumes, laser engraving, machine processing CE marking: present Machinery Directive: 2006/42/EC EMC Directive: 2014/30/EU Low Voltage Directive: 2014/35/EU

Condition: good (used), Year of construction: 2002, For sale are 3 units of electrostatic industrial filters from the brand Air-Fresh-Service, model F-V10. Voltage/Frequency: 230V/50Hz Current: 1.0 A Power: 0.22 kW Transport and loading can be organized across Europe at an additional cost if required. Prices are exclusive of VAT. Dwsdpfxey H H Dvs Apwea Viewing is possible by appointment. Please contact us; our team will be pleased to assist you further. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or to get in touch, please use the contact form.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Dsdpfst Tyqmsx Apwowa Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets Djdpfxexb Dcvj Apwowa - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine.

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Financing through our bank is also possible. komplett-konzept.leasingo.de Dwodpfxex Ex Nzj Apwsa Find more items – new and used – in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 640 h, The configuration consist of - ATOS Compact scan (measuring head) - Picture creation PC7810.S - Industial stand - GOM Scan Software - GOM Inspection software Djdpfxovpu U Aj Apwjwa The condition is new and barely used.

Condition: ready for operation (used), Year of construction: 2021, A wet extraction system Ulrich Anlagen und Industrieservice is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, particle size: less than 1µm, separation efficiency: 97.5%, control system: Siemens S7. Including buffer tank, Almatec AHS 25 heavy-duty membrane pump, MSE 470-30 chamber filter press, working platform, stainless steel filtrate tank and discharge and cross conveyor screw. Documentation available. On-site inspection is possible. Dedpfev I Db Nex Apwjwa

Condition: used, functionality: fully functional, For sale are 2 industrial multiplex refrigeration units in robust design, equipped with multiple Bitzer piston compressors. The units originate from an operational site and have been professionally dismantled. Ideal for continued use, retrofit projects or export. Scope of delivery: - Complete multiplex system - Fitted Bitzer compressors - Control cabinet/controller Dwsdpfxjyxvqcs Apwsa Condition: - Used - Dismantled from a working installation - Age-related signs of wear - Sold without warranty

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22924, Exhaust Air Dust Extraction System Dimensions of suction unit: Length: 1,100 mm Dedpfx Apsv Scfujwowa Width: 1,100 mm Height: 1,950 mm Dimensions of filter housing: Diameter: 900 mm Height: 1,400 mm Dimensions of control cabinet: Width: 400 mm Height: 600 mm Depth: 300 mm The exhaust air and dust extraction system has already been dismantled and is ready for collection.

Condition: used, functionality: fully functional, Exhaust Air Dedusting System Height: 4300 mm Width: 3000 mm Depth: 1300 mm Base frame dimensions: approx. 1750 mm Upper part dimensions from flange to motor cover: approx. 2450 mm Exhaust air box on top of motor cover: approx. 400 mm Dwjdpexq Epvsfx Apwoa The exhaust air and dedusting system is equipped with a new motor, which we newly installed in September 2025. The system has already been dismantled and is ready for pickup.

Condition: excellent (used), Dusty air filter - self-cleaning Air flow rate: 20,000 maximum design Dimensions: 4000 x 2450 x h 8000 approximately Total filtering surface: 170 m2 Filters: in antistatic polyester fabric - new Filter cleaning system: air jet in backwash with regulation and control unit Filtered dust discharge system: motorized auger, star valve; discharge in big-bags Electric fan: Kw 30 Dwjdpfev Ny Emox Apwja Electric panel: with star/delta start (no inverter) Machinery checked, overhauled before delivery to the user

Year of construction: 2008, operating hours: 470 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Yxlon MU 2000, Yxlon MU 2000 type industrial X-ray screening equipment with 160 KV output: The system were totally refurbished in 2020. The flat panel and all of the axiscontrol electromotors were also replaced!!! The stained glass viewing window with a safety lock can be opened with two hands and the workpieces can be inserted without stopping the radiation! The workpieces can be moved using a five-axis manipulator. The movement can be programmed, which speeds up the work and makes the evaluation more accurate. However, it is also possible to move it manually for inspection! Size and weight of the workpieces: - Diameter: 400 mm Length: 900 mm Weight: 60 kg - Cabinet dimensions: 2200 x 2700 x 1800 mm - Weight: 4000 kg - Computer control The machine automatically moves the inspection table and the tilt angle and height of the C-arm according to the program compiled on the basis of the parameters of the places to be tested, so that the number of testable pieces can be significantly increased in the case of serial tests. Several components can be loaded into the cabin at the same time, and the machine examines them one by one according according to the programming. MG 165 x-ray device Y.TU-160 D 06 metal-ceramic X-ray tube, for detecting small defects in steel or aluminum castings, parts - Focus size: 1.0/0.4 mm - Test voltage: 8-160 kV, 1.00/0.64 kW power - Closed system water cooling WL3002 - Translucent material thickness: steel 35 mm, / aluminum 45 mm XRD Flat Panel - 200 x 200 mm active area - 512 x 512/400 μm/30fps or 1024×1024 pixels/200μm/15fps resolution - Special frame grabber - Y.T24.CD01, 24″, 1920×1200 pixels, color TFT monitor - Load capacity: 160 kV Control panel - MGC 41 control panel - Manipulator control (joystick) - Door control, push buttons /two-handed/ - Image processing control - digital image processing software - Image archiving - Image captioning Dwsdpsu Hzvxjfx Apwsa - Image comparison with a reference image - zoom function - blackout control - Fast video card + frame grabber + evaluation PC - Measurement and calibration functions - Windows operating system - DICONDE data format

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Dwodpfx Apeyn Rmiswoa Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm