Used Emco Vmc for sale (143)

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm Nwedpovwgpbsfx Af Isb spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R6AP3801, turning length: 600 mm, turning diameter: 360 mm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Nedpfx Aew Em A Aof Iswb Maximum current: 48 A Nominal current: 36 A Short-circuit current (Ik): 6 kA EQUIPMENT - Double spindle

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: A8EW4982, turning diameter: 250 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, controller model: Sinumerik Operate, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 100 mm Z-axis travel: 300 mm C-axis for main spindle: available C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main drive speed: 60 - 6,300 rpm Tool turret: 12-way VDI16 Driven tools: 6 pieces Nedjv Dlr Iepfx Af Iewb Driven tool speed: 200 - 6,000 rpm Driven tool power: 1.2 kW Max. finished part length: 120 mm Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - SINUMERIK Operate key module - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety devices in accordance with CE - Various tool holders (radial tool holder M4 (2x), radial tool holder M3 (1x), collet holder ESX 16 (2x), set of collets ESX 16 (1x), indexable insert drill holder Ø16 mm (1x), boring bar holder Ø10 mm (1x), radial angle milling holder 90° (1x), axial milling holder straight (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm through-hole, 1 set of soft top jaws (432 095) with 1/16" × 90° serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C including draw tube (A8Z 150 010) for draw collets 385E / 842 / 5C Ø2 - 25.5 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Nwodpfexa Arajx Af Ijb Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Nwedpfxsw Dfhus Af Ijb

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Nwsdpog Rcf Ijfx Af Ijb

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Nsdpjg Rcf Sjfx Af Iswb

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter: 25 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, bar passage: 25 mm, bar diameter (max.): 25 mm, Emco ET425 2 main spindles, 2 pick-off spindles 2 turrets, 12 tools per turret or 4 driven tools with double bar feeder magazine Nodpfx Aew Adxpsf Iswb

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control Nodpfjv Iqm Sox Af Iewb - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Nwodsv Iqlzopfx Af Ijb Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Nwedpfxjv Imzfe Af Iob Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! Nedpfx Aov Ip Izjf Iswb The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Nwjdpfxsk Nk I Ns Af Ieb

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Nodpfxok Nk Iwe Af Iowb

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws Nodpjv Hqntefx Af Iowb - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Nwjdpsw I S Uuofx Af Isb Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Year of construction: 2005, condition: excellent (used), Control: Siemens 840 D Travel distances: X-260 mm; Z-610 mm Speeds: Main spindle 0-5000 RPM; Sub-spindle 0-7000 RPM C-axis Y-axis 80 mm 12-station turret, all driven Tool holder VDI 30 Speed of driven tools 0-5000 RPM Bar passage 65 mm Nsdjppyryopfx Af Iowb Accessories: Hainbuch collet chuck on main and sub-spindle Part catcher Chip conveyor Emco loading magazine LM 1200 Various tool holders

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Nwjdpfx Afjwpkd Sj Ijb

Condition: ready for operation (used), Year of construction: 2003, controller manufacturer: SIEMENS, controller model: SINUMERIK, total height: 2,450 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of axes: 3, This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. Additional equipment • Max Torque: 100 Nm (at 5000 RPM), 78 Nm (at 8000 RPM option) • Tool Change Time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Span-to-span Time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant System: Tank capacity 100 liters / Flow rate 10 l/min / Max delivery pressure 3.7 bar / 4 external nozzles • Lubrication System: Automatic central lubrication for guideways and ball screw spindle / Grease lubrication for main spindle bearings • Pneumatic Connection / System pressure 5 - 10 bar • Minimum air flow 750 l/min / Average air consumption 180 l/min • Electrical Connection: Power supply 3/PE ~ 400 V 50/60 Hz / Connected load 15 KVA / Main fuse 35 A slow-blow Machine Benefits Technical Machine Benefits Nwjdoya Hg Nepfx Af Ieb • Qualitative machine benefits: • Reliable tool change system with 12 stations • Integrated automatic lubrication system for guideways and ball screw spindles Technical Specification Taper Size SK 40 Dimensions Machine Depth 2300 mm

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Nwodpfx Aovt Amujf Ieb Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions Nwjdpfx Ajwlpb Usf Ieb In good condition Fully functional

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 Nwjdpfxovc Awro Af Iob interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Year of manufacture: 2000 Njdpfsxxakwex Af Ijwb

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Nsdponk Uabefx Af Iewb

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min Nwedpjydqq Tsfx Af Ijb auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.