Used Emco Turn 342 for sale (139)

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Nsdpfxeu Ibihj Akcsla Technical details shown in attached pdf document. Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, bar diameter (max.): 26 mm, total width: 2,200 mm, total height: 2,200 mm, travel distance X-axis: 78 mm, travel distance Y-axis: 210 mm, overall weight: 2,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with EMCO specials, number of axes: 4, This 4-axis EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details. • Condition: Very good; connected and ready for testing • Tech specs: • Swing above slide: 160 mm • Main spindle to counter-spindle: 408 mm • Max. turning diameter: 100 mm • Max. part length: 600 mm • Max. bar-stock diameter: 26 mm • Travel: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter-spindle: • Speed range: 0–5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamp length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° Nlsdpfxjy E Sp Us Akcea • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool stations: 2 × 12 • VDI shaft: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0–5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Supply rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: Fanuc 21T revolution per minute: 50 - 3000 U/min Nsdpfjy Emfwox Akcjla range of revolution per miute: 0 - 6300 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 kW electrics - voltage/frequency: 400 / 50- 60 V/Hz Weight approx.: 1,0 t dimension machine xH: 2,2 x 1,0 x 1,62 m Machine built in 1999, first commissioned in 2000 The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria) range. It is in the medium power and size range and is often used in training, workshops, and production. It is specially designed for the precision machining of small parts, shafts, and chuck parts. *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm Nsdey Emfqopfx Akcjla turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: FANUC 21T revolution per minute: 50 - 3000 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 KW kW electrics - voltage/frequency: 400 / 50 -60 V/Hz Weight approx.: 1,0 t dimension machine xH: 2,2 x 1,0 x1,62 m The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria) range. It is in the medium power and size range and is often used in training, workshops, and production. It is specially designed for the precision machining of small parts, shafts, and chuck parts *

Condition: good (used), Year of construction: 1999, Emco lathe PCturn 120 with accessories and documentation Nlodpoyhzfyefx Akcsa

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Nsdsyzn U Espfx Akcjla Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Subject to prior sale, modifications, and errors!

Year of construction: 2001, condition: excellent (used), machine/vehicle number: R2D P1503, Spindle Ø (tong passage): 32 mm Max. Turning Ø: 140 mm Distance between the spindle noses: 720 mm Main spindle, mounting acc. To DIN 55026: KK 4 Passage in the draw tube: 32 mm Counter spindle, mounting acc. To DIN 55026: KK 4 Nodpfjf Ddafsx Akcela Travel z: 510 mm Travel speed: 24 m / min Main spindle drive, AC motor: 10 kW Infinitely variable speed range: 0 - 8000 rpm Counter spindle drive, AC motor, power at 40% ED: 10 kW Infinitely variable speed range: 0 - 7000 rpm Disk turret tool system with directional logic, 25 holders Number of driven tools: 12 Rotation speed of the driven tools: 0 - 6000 rpm electr. Connection: 400 V Weight approx .: 3000 kg Required space: 2600 x 1980 x 2350 mm

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 430 mm turning dia. over face-slide: 210 mm turning length: 510 mm facing movement (x-axis): 150 - 160 mm longitudinal traverse (z-axis): 300 - 510 mm Nodeyw Hmfspfx Akcola control: Fanuc 21T revolution per minute: 6300 U/min max. torque on the spindle: 17,5 Nm external spindle dia. in forward position: 45 mm tool turret - number of stations: 8 Main spindle capacity: 11 kW electrics - voltage/frequency: 400/50 V/Hz total power requirement: 17 KVA Weight approx.: 2,4 t dimension machine xH: 2,2 x 1,4 x 2,0 m The EMCO TURN 345 is a compact and powerful CNC lathe designed for the precise machining of individual parts as well as small and medium-sized production runs. It is characterized by its robust construction, high reliability, and ease of operation. Equipped with the proven Fanuc Series 21-T control system, the machine ensures precise and stable process control as well as straightforward programming using standardized G-code. *

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,741 h, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm Njdpfx Aksympxnocsla • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tooling system: • Turret: VDI 16 disk turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feeds & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning spread (Ps): 3 µm • Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor (referenced in the stated machine weight)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,971 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 5,500 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, number of axes: 2, Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tooling system: • Turret type: VDI 16 disk turret with directional logic • Number of tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feeds & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min Njdpfx Akjymqmmjcsla • Positioning spread (Ps): 3 µm • Physical dimensions Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor Dimensions Machine Depth 1270 mm

Condition: good (used), EMCOTurn 120 CNC lathe. Nodpfou Rd S Rex Akcola 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ex-College machine

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 340 mm turning dia. over face-slide: 158 mm turning length: 300 mm facing movement (x-axis): 300 mm longitudinal traverse (z-axis): 300 mm control: Siemens 810T Nodpeylt Nzefx Akcola revolution per minute: 60 - 4.000 U/min max. torque on the spindle: 106 - 145 Nm external spindle dia. in forward position: 80 mm feed motor: 8500 N rapid motion - x-axis: 6 m/min tool turret - number of stations: 8 tailstock adjustment: 120 mm Main spindle capacity: 11/15 kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 20 KVA

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm Nlsdpsx Aq Hwjfx Akcea slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t Nodpfx Akex Aq Hkjcela dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: used, Year of construction: 2000, Technical details: Nsdpfx Ajx Dcgxskcola turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. Nljdpfsu Ixwiox Akcsa *

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Nljdpfx Aksxmkcascoa

Year of construction: 2003, condition: ready for operation (used), Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible. Nsdsxuvn Dspfx Akcjla

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Nledpfoxvrv Tjx Akcsa Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6A N3602, turning length: 520 mm, turning diameter: 360 mm, overall weight: 3,800 kg, TECHNICAL DETAILS Turning diameter: 360 mm Nodpfxjxvrruo Akcjla Turning length: 520 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Required space: 3 x 2 x 2 m Machine weight: 3.8 t

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, turning diameter over bed slide: 430 mm, workpiece length (max.): 510 mm, TECHNICAL DETAILS Turning diameter: 220 mm Turning length: 700 mm / 665 mm Swing diameter over bed: 430 mm Max. part length: 510 mm X-axis travel: 160 mm Spindle bore diameter: 45 mm MACHINE DETAILS Total power requirement: 17 kW Nsdpjxvrn Nofx Akcsla Dimensions & Weight Required space approx.: 2.63 x 1.98 x 1.94 m Machine weight approx.: 2.6 t

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total height: 1,940 mm, total length: 1,980 mm, total width: 2,630 mm, TECHNICAL DETAILS Nodpewxw Aasfx Akcsla Working Area Swing diameter over bed: Ø430 mm Distance between centers with standard tailstock: 700 mm Maximum turning diameter: Ø220 mm Maximum workpiece length: 510 mm Maximum bar capacity: Ø45 mm Cross-slide travel X: 160 mm Cross-slide travel Z with manual tailstock: 310 mm Main Spindle Spindle mount according to DIN 55026: A5 Spindle outer diameter at front bearing: Ø80 mm Solid clamping cylinder with drawbar for chuck parts up to: Ø165 mm Hollow clamping cylinder with draw tube max. through-hole: Ø45 mm Maximum chuck size: Ø160 mm Main Spindle Drive AC motor, power (100% / 40% duty cycle) with integrated holding brake: 9 / 13 kW Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Rotary axis resolution: 0.001° Rapid traverse: 100 rpm Feed Drives AC motors for X and Z axis feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position scatter Ps according to VDI 3441 in X/Z: 3 / 5 µm Tool System Disk turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations: 12 Turret indexing time: 0.14 s Standard Tailstock Travel: 460 mm Quill stroke: 120 mm Quill diameter: Ø60 mm Internal taper for live center: MT4 Quill thrust: 5,000 N MACHINE DETAILS Footprint: 2.63 m x 1.98 m x 1.94 m Space requirement: 3.0 x 1.92 m Height: 1.88 m Weight: 3.8 t

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6AN3701, turning length: 520 mm, turning diameter: 360 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 6,300 rpm, total height: 1,872 mm, total length: 1,941 mm, total width: 3,074 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Working Area Swing diameter over bed: 600 mm Nljdpfx Akswxw H Secsa Swing diameter over cross slide: 360 mm Slide travel X/Z: 210 / 610 mm Distance main spindle – tailstock: 805 mm Max. workpiece size with tailstock: Ø160 x 520 mm Main Spindle Spindle interface according to DIN 55026: A5 Spindle external diameter at front bearing: Ø80 mm Through-hole hydraulic chuck with drawbar for workpieces up to: Ø160 mm Hollow clamping cylinder with drawtube max. passage: Ø45.5 mm Max. chuck size (spindle size Ø45): Ø160 mm Tailstock Internal taper: MT4 Tailstock travel: 500 mm Max. tailstock force (hydraulically controlled): 8,000 N Feed Drives Feed force X/Z: 5,000 / 7,000 N Rapid traverse speed X/Z: 24 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning accuracy range X/Z/Z₂: 3 / 5 / 4 µm Main Spindle Drive AC motor power 100/40% duty cycle: 9 / 13 kW Speed range (stepless): 0-6,300 rpm Max. torque: 89 Nm MACHINE DETAILS Dimensions (W x D x H): 3074 mm x 1941 mm x 1872 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: R2EV3502, turning length: 310 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total length: 1,630 mm, total width: 2,250 mm, overall weight: 3,300 kg, bar passage: 45 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Maximum bar capacity: ø 45 mm Distance between centers (spindle nose - tailstock center): 687 mm Carriage Travel Carriage travel X-axis: 160 mm Carriage travel Z-axis: 310 mm Main Spindle Spindle connection according to DIN 55026: KK5 Spindle outer diameter at front bearing: ø 80 mm Main Spindle Drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotational Axis) C-axis resolution: 0.001° Input for Sinumerik/Fanuc drives: 1,000 / 100 rpm Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives AC motors in X and Z axis Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position dispersion Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Tool System Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Shank diameter for boring bars: ø 32 mm Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Total connected load: 17 kW Machine weight: approx. 3.3 t Nlsdpfx Akswxwvaecja Space requirement: 2.25 x 1.63 x 1.94 m

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Njdowu Ecgjpfx Akcela Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck