EMCO Emcoturn 325

EMCO Emcoturn 325

Condition: used, Year of construction: 1979, SKF cylindrical grinding machine with internal grinding attachment, hydraulically operated. Ibedpjgt Ea Rofx Ap Doc

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit Iodpfx Asycvaqjp Dsbc - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: used, machine/vehicle number: 1 284 066, Feed diameter: 200 mm Through-hole: 50 mm Mounting, short taper according to DIN 55027: Size 6 Outer diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to the front of the chuck, without jaws): 150 mm pneumatically actuated Ibedpfxjcm Tgko Ap Dsc

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Ijdoy St Sdopfx Ap Dsbc Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, Spindle bore: 21 mm, speed range: 150–400 rpm, tool turret with 8 stations. Ibodpju Rd S Rjfx Ap Djc Ex-college machine.

Year of construction: 2007, condition: ready for operation (used), A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible. Ibodozhnt Sspfx Ap Dsc

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,955 h, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 3,700 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, product length (max.): 1,270 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details. • Spindle motor power: 3.7 kW (5.5 kW at 40% duty cycle) • Spindle speed range: 60 - 6300 rpm (infinitely variable) • Feed Force: 3000 N / 3500 N • Rapid Traverse: 15 m/min / 24 m/min • Number of tool slots: 12 • Main electronic connection: 400 V (3/PE) • Power consumption: 6 kVA • Chip conveyor: Included • Swing over bed: 250 mm • Max. Turning Diameter: 85 mm • Max. Turning Length: 225 mm • Max. Bar Capacity: 25.5 mm • Distance between centers: 405 mm • Spindle Connection: Ø 70 h5 • Max. Chuck Size: Ø 100 mm • Max. Torque: 35 Nm • Turret Type: VDI 16 disk turret with directional logic • Tool Shank Cross-section: 12 x 12 mm • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Optional We can also offer a bar loader from another customer for an extra amount. Ibsdpfx Aozk Ep Nop Dsc Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Iodsxmkcajpfx Ap Djbc

Condition: excellent (used), Year of construction: 2017, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Ibodpfx Apoxw Nxuo Doc Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Max. machining length : 110 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 5.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 42 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 END ATTACHMENT - Number of positions : 5 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 1.4 [kW] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.880 x 1.375 [mm] - Machine height : 1.940 [mm] Isdpfxex S R Nto Ap Djbc - Machine weight : 3300 [kg] MACHINE HOURS - Number of working hours : 18939 [h] EQUIPMENT - CNC : Fanuc 0i-TD - Interface : RS232 - Rotating guide bush - Ejection of workpiece - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : LNS SPRINT 565 - Oil mist extractor