4
Felder sliding table saw K-540 S
- cutting length 2800 mm
- cutting width 800 mm
- max saw blade Ø 400 mm
Cbj2avuytk
- cantilever table 1300 mm
- with crosscut fence 2600 mm
- engine power 5,5 kW / 7,5 PS
- Year of manufacture 2019
12
Very little used machine from a small workshop.
Very good condition!
Motor: 380V; 5.5kW
Cutting width 800 mm with full table length, min. transport width 1000 mm
Rip fence with fine adjustment
Circular saw with saw blade tilting 90°–45°
Mechanical angle indicator
Cutting height max. 104 mm with a blade diameter of 315 mm
Electrically driven scorer Ø-120 mm
Speed 4800 rpm
Circular saw guard EURO II standard
Ca7xaxlizn
Format sliding table F, cutting length 2500 mm, anodised
Outrigger table cross...
7
Item: D-1035-Double bulk feeder with weight
Stainless Steel double bulk feeder with weight.
Dimension: Vat L 1800 X W 850 X H 1300 mm
Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm
L 2700 + weight 500 mm , Total L 3200 mm
Bexwfumahc
3
60 ton hydraulic press stands there like new, was only briefly used as a trial press, table size 1200 x 800 mm incl. belt system and straightener. Weight 14.5 tons. If interested, technical data and operating instructions will be sent.
Fh9w87t
10
I will sell a Felder table saw K 890S
- cutting length on a sliding trolley 320 cm
- cutting width on the parallel stop 130 cm.
- electric three-sided saw, scorer.
Cantt0mvua
The machine is in very good condition, very little used.
6
semi mobile sorting table
with feeding conveyor
air separator
6-station sorting cabin
Bmu7ubzk
overband
works in dual power (diesel or 100% electric)
5
Here we offer a Weiss cold-heat test chamber.
Designation: SB22/500/40-S air cooled with humidity
cold-heat operation: -40°C...+180°C
climatic operation: +10°C...+95°C
Humidity range: 10...98 % r. h.
Temperature change rate:
Cooling down: approx. 2.5 K/min
heating up: approx. 2,5 K/min
Outer dimensions with and without hinges and mass of the test chamber;
External dimensions with hinges and door lock: H: Height 1980 mm W: Width 1220 mm D: Depth 1365 mm
External dimensions without hinges and do...
6
Press stacker Desta BAS-FSA 500 / S
The machine is in very good condition.
Jx9pa3
Works with every folding machine, line for brochures, etc.
Technical data:
Sheet size: 500 x 320 mm
Stacking height 400 mm
Minimum format 100 x 80 mm
Press force: 20,000 N
adjustable speed 50 – 230m / min.
Feed height 400 – 950 mm
adjustable exit height: 875 mm
Power: 380V; 50HZ – 1.5kW
Weight: 400 kg
15
11
Code: 0681
Brand: MASTERWOOD
Model: K 23/S
Multiple boring machine with 23 chucks
Technical data:
N° 23 quick release chucks
45 degree rotation of drilling heads
Center distance between chucks mm 32
Max drilling depth mm 75
Worktable dimensions mm 1000 x 700
Motor power Hp 2,5
Chucks rotation rpm 2800
Air pressure atm 6-8
Gfj0tgib
Overall dimensions mm 1100 x 1300 x 1100 h
Weight kg 505
2
Voltage: 230V, weight: 35kg.
Bl2sci9zs
2
CNC control: Make NESI
Number of axes n° 4
with ball screws
centre height 135 mm
center width 660 mm
table dimension 1150x 130 mm
longitudinal movement 600 mm
Vertical adjustment of the grinding head 250 mm
Rotation range of the grinding head:
Horizontal +/- 90 degrees Vertical +/- 90 degrees
Motor 380 Volt power 4 KW
Machine dimensions: Length x width x height 2000x2000x1900
Weight of the machine approx. 1600 Kg
.
Accessories:
Dressing device at the tailstock
Pvv9s3
5
Working width: 2600 mm
Number of heads: 8 pcs
W702f8ol
Motors: 2 x 75 kW + 2 x 132 kW + 2 x 160 kW + 2 x 160 kW
15
pressure:500 t
passage width:1100 mm
stroke:600 mm
weight of the machine ca.:ca. 22,8 t
Table area:1100 x 800 mm
ram surface:1100 x 800 mm
Daylight Opening:800 mm
Hydraulic:300 bar
closing speed:60-200 mm/sec
pressing speed:0 - 9,5 mm/sec
opening speed:28-200 mm/sec
Table height above ground level:900 mm
height over floor:5100 mm
workpiece weight max.:2000 kg
workpiece weight top:1000 kg
halls height:min. 6500 mm
Number of pressing cylinders:1 St.
number of driving cylinders:2 St.
:ca. 270 Lt./m...
11
Double reel, reel, decoiler, motorized reel for sheet metal processing, punching, eccentric press, hydraulic press, automatic punching machine, motor reel, winding reel, decoiler, sheet metal unwinder
B0dro3a7lg
-Manufacturer: Eigl, double decoiler with automatic control
-Control: see photos for individual components
-Dimensions: 1370/1000 / H1550 mm
-Weight: 357 kg
4
new screw compressor
Year of manufacture 2020
Belt driven screw compressor on tank with attached
attached refrigeration dryer
Thanks to direct coupling of motor and compressor stage, transmission of the entire power of the electric motor to the compressor stage, thus optimal efficiency
Star-delta switch as standard
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
High cooling effect and...
2
Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material
→Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins.
→Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min.
→Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal
→Pneumatic cu...
9
2008 Ferromatik K-TEC 175-1650 S
Manufacturer (location) Ferromatik, (Pomezia Italy)
Model K-TEC 175-1650 S
Cbshzucwjg
Year of manufacture 2008
Serial number 543534 543535 543536
Working hours Not certain: roughly 55000-65000 hours each
Molds NOT INCLUDED NOT INCLUDED NOT INCLUDED
Material Polypropylene
Final product Screw on caps for mouthwash
Output, bph, shotsize, cavitation, etc we ran 32 cavities at 13.5sec with 250g shotsize (approx 60-70kg per hour)
Clamping force 1...
Vögele S 1600-2/Niveltronic Plus/AB 500-2T/2.55m-6.50m
- Manufacturer : Vögele
- Type : Super 1600-2
- Year of manufacture : 2012
- Operating hours : 5500
- Total weight : 19000Kg
- Engine manufacturer : Perkins
- Engine type : 1104D-E44TA
- Engine power : 100kW / 135PS
3xo2i0dg
- Fuel : Diesel
- Screed : Vögele AB 500-2TV
- Working width hydraulic : 2550mm widening up to 5000mm
- Working width/paving width from 5000mm to 6500mm
- Working width extendable up to 8000mm with additional accessories...
3
pressure 500 t
H9ibe2yrm
passage width 750 mm
stroke 120 mm
total power requirement 57 kW
weight of the machine ca. 16 t
dimensions of the machine ca. m
4
Stick electrodes 4.0 x 450
-Type: Phoenix K 90 S
-Price: per package
-Number: 2 packages available
Besegdvcf2
-Weight per package: 6.2 kg
15
Make: Ferromatik Milacron
2 colours, each with 2 additional injection units as Alternatives
Type K 85D -S/2F
Control: IQT 44
year of construction : 1998
Operating hours 32930 h
Clamping force: 850 KN
Horizontal injection unit (1. and 2.) 2 pieces
Screw diameter 30 mm and 40 mm
Injection pressure bar 2400 and 2000 bar
Displacement 79 and 154 ccm
Injection weight: 70 and 140 gr.
Vertical injection unit (1. and 2.) 2 pieces
Screw diameter 25 mm and 30 mm
Injection pressure bar 2254...
9
Ref. no.: 10003
Producer: FERROMATIK MILACRON
Type: K 850-S 2F
Year of construction: 1999
Clamping unit
Clamping force: 85 ton
Opening stroke: 550 mm
Distance between tie bars: 420 x 420 mm
Mould height min.: 250 mm
Platen size (h x v): 640 x 665 mm
Injection unit
Screw diameter: 35 + 25 mm
Injection volume: 135 + 49 cm³
Shot weight: 123 + 44 g
Injection pressure: 1964 + 2254 bar
Bual9kla
Measurements and weight
Dimensions: 5 x 1,6 x 2,0 m
Machine weight: 6100 kg
Additional information &...
15
2
Clamping force 1100 kN
Cavmpjxrlb
Injection pressure 1936 bar
Stroke volume 254 cm3
5
workpiece length 1500 mm
stroke 0 mm
swing dia. 500 mm
total power requirement 30 kW
weight of the machine ca. 8 t
93ehtsip3
dimensions of the machine ca. m
The hydraulic 500 ton press -Bj. 2015 was used very little, is almost like new. Location-Mittweida, Germany
Bsf9py7ifh
5
neu
ca. 10 Wochen ab Auftrags
Türkei
4100
1
500 kg
1200 mm
470 mm
520 mm
300 mm
50 mm
0,55 kW
1400 mm
1200 mm
1550 mm
190 kg
Jw7grm
motorized drive
mechanical adjustable coil mandrel with 4 jaws
speed control for decoiling speed aswell as acceleration- and deceleration times
photoelectric proximity ensor SICK for sag control
4
General Data
Machine weight 2330 kg
Clamping Unit
Bzvocvb
Clamping force 500 kN
General Data
Machine weight 2330 kg
Clamping Unit
Clamping force 500 kN
This Arburg Allrounder 320 C / S 500-250 Vo Injection Moulding Machine was manufactured in 1999. This machine has a 500 kN Clamping force.
Application Types
Injection Moulding
15
13
12
15
5
CNC machining center (4-axis)
CHIRON FZ 08 K S MAGNUM high speed
year of manufacture 2005
CNC control: Siemens 840 D
traverse path X: 300 mm
traverse path Y: 250 mm
travel Z: 250 mm
rapid traverse (X/Y/Z) :40/40/60 m/min
Clamping surface
Table: Rigid table
Clamping surface :620 x 270 mm
Spindle
Speed :15.000 rpm
Power :7,2 kW
tool holder :HSK-A 32
B8igo2i3
tool changer :23 stations
Equipment :
Coolant supply :
Coolant high pressure (IKZ)
Weight 3400 kg
1
capacity 90 degrees: round 510 mm
capacity 90 degrees: square 480 mm
610 x 450
saw band length 5320 x 34 x 1,1 mm
band speed 15 - 100 m/min
table height 820 mm
Crqb0vb
total power requirement 3,0 kW
weight of the machine ca. 2,3 t
dimensions of the machine ca. 2,65 x 2,8 x 2,2 m
15
14
13
10
Ferromatik Milacron K-TEC 450-S with gas boost (159)
Product Code: 159
Availability: In Stock
Year of production: 2006
Brand: Ferromatik Milacron
Technical data
Shot Weight: 649 g
Clamping Force: 4,500 kN
Screw dia: 60 mm
Injection pressure: 2144 bar
Tie bar distance: 825 x 825 mm
Platen size: 1195 x 1267 mm
Mould height min.: 420 mm
Language: English,German
Power: 94,7 kW
Workinghours: 70800 h
Weight: 27000 kg
Dimensions: 10 x 2,4 x 3,1 m
B79zrbswuv
Hopper: Yes
Core pull: Yes
Euromap: Ye...
4
Pallet feeder
Jxt273
1. station with 4 buckle plates and upstream and downstream slitter shaft cassette
2 folding blades
horizontal buckle plate in K-part