Used Fertilizer Distributor for sale (476)

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). Fsdpez E Dagjfx Al Uegh The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Price negotiable. The entire system is being sold as a complete unit.

Condition: used, Year of construction: 1990, Hydraul. Folding to the front Electric control panel Hydraulic lift / PTO shaft / Fodpfx Aljuambde Usgh

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, Fedpfx Aszt Hmzol Uogh • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Fjdpfx Aerxr R Sjl Usgh

Condition: excellent (used), Index MS42C HBF rod guide Oil distributor Flaps with tensioning screws Fgodefdr R Uopfx Al Ueh

Condition: used, Year of construction: 2018, approx. 5000 ha Spreading disks TS 30 / Fodpfxstphckj Al Uegh

Condition: new, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens Blade Blocks / Distributor Blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power class, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module of the pitch system and is responsible for the precise, rapid adjustment of the rotor blade pitch angle. This assembly is a critical safety- and performance-relevant key component, which plays a significant role in yield optimization, load regulation, and operational safety of the wind turbine. As a hydraulic distributor block, the component is fully integrated into the plant’s control architecture and communicates directly with the main control system. Due to the high mechanical and hydraulic loads, only OEM components of the highest manufacturing and engineering quality are used here. The ZCH 565227 type is used in several current Siemens wind turbine models and is considered a critical component for avoiding unplanned downtime. Technical Data: • Manufacturer: Siemens • Type / Part Number: ZCH 565227 • Designation: Blade Block / Distributor Block • Application: Pitch System • Compatible Models: incl. Siemens SWT-3.6-107 Onshore • Power Range: approx. 2–4 MW Condition & Scope of Delivery: • Condition: New, unused, in original packaging • Availability: 4 units immediately available • Delivery: Europe-wide shipping possible These blade blocks are ideal as strategic spare parts to ensure plant availability or for planned maintenance activities. Fgsdpex Tftiofx Al Ush For technical inquiries, serial number verification, or a prompt transaction, we are at your disposal.

Condition: used, Year of construction: 2020, WindControlRolling and parking device swiveling AutoTS on both sides / Pipe protection bracket L Inclination sensor for weighing system FlowCheck EasyCheck mats, 16 / pieces Dirt trap L and ladders Lighting LED cover roller tarpaulin L / Spreader blade set TS Fodpfx Alorxr Uyj Uogh

Condition: used, Year of construction: 2023, Operation Spreading vane set TS20 left + right Hydro drive left + right with Auto TS / and FlowControl Main disk left + right with AutoTS Pipe protection bracket Rolling and parking device swiveling Working light Tilt sensor f Weighing system / 16 pcs EasyCheck- Fsdpfst A Tzwjx Al Ujgh

Condition: used, Year of construction: 2023, Main window right/left with Auto TS roll guard L tell device / swivel, factory-fitted Inclination sensor f Weighing system elect. / Profis weighing system built-in parts f ZA basic units LED / Rear lighting manual Fjdpfx Aet A Udgsl Uogh

Condition: used, Year of construction: 2024,

Condition: used, Year of construction: 2002, fuel type: diesel, gearing type: other, color: grey-black, TITLE: LINDE H30D duplex REF: 26M01 YEAR: 2002 SERIAL NUMBER: H2X351N00134 HOURS: 8,400 ENGINE: diesel ORIGIN: Italian MINIMUM OVERALL HEIGHT: 2.65 m MAXIMUM LIFT HEIGHT: 4.10 m MAST: duplex CAPACITY: 3,000 kg EQUIPMENT: with forks SIDESHIFTER: yes WHEELS FRONT: 2 REAR: 2 ACCESSORIES: - 4th valve hydraulic distributor Fgsdpfxjy H S Iyj Al Ush REFURBISHED: yes SERVICED: yes TYRES: 80% PRICE: €11,500 + VAT Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for updated prices and conditions. For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. Over 50 trucks and 150 hooklift bodies, containers with and without cranes available for immediate delivery. E.&O.E Given the number of listings and the level of detail provided, Aurora recommends verifying the correctness of the listed information with the sales team.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2650207, travel distance X-axis: 300 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,360 mm, total length: 2,020 mm, total width: 1,000 mm, table width: 260 mm, table length: 560 mm, table load: 150 kg, rotational speed (max.): 20,000 rpm, overall weight: 2,180 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 5,500 W, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X5 CNC Vertical Machining Center – New Machine Compact CNC vertical machining center, designed for precision machining of single parts as well as for small and medium-sized production runs. Equipment: Schneeberger mineral cast chassis Fgodpfx Aloz Eh E To Ush Siemens SINUMERIK 828D CNC control THK linear guides and ball screws BT30 spindle, 20,000 rpm 16-tool automatic tool changer Coolant system Automatic centralized lubrication Fully enclosed work enclosure Work area lighting New machine, available in stock, selling price CHF 43,900 (excluding VAT) The machine can be viewed and tested in our showroom in Le Locle, Switzerland. Commissioning, training, and after-sales service are provided directly by Swiss Machines Tools, the SYIL distributor in Switzerland. Please contact us for detailed technical specifications, available equipment, and options.

Condition: used, Year of construction: 2024, ArgusTwin + WindControl Spreader Connect Hydro drive left and right with / AutoTS and FlowControl Profis Pro main screen left and right with AutoTS / Rolling and parking device s Tilt sensor EasyCheck mats, 16 pieces / Device control unit Fedpfx Asrxr U Del Uegh

Condition: used, Year of construction: 2024, Manual operation Spreading vane set TS20 left Spreading vane set TS20 / right Hydro drive left with AutoTS and FlowControl ProfiSPro Hydro drive / right with AutoTS and FlowControl ProfiSPro Main disc left with AutoTS / main disc rec Fgedpfx Alotrdzwe Ujh

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control Fgsdpfx Aloz Edlve Ueh 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. Fgjdpfjzvcknex Al Ujh The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, Year of construction: 2010, functionality: fully functional, Gietz FSA 870 Compact high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Top FSA 870 Compact specification High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : non stop delivery Fully reconditioned by exclusive distributor for Gietz AG , Switzerland in UK Fedpjz Hw Tvofx Al Ujgh

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Fgjdpfxet Nf Dqe Al Ush

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting Fjdpfxsyx Dfns Al Uegh -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 6, number of print heads: 6, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning We have an AEOON COMPACT SERIES DTG printer for sale. The machine was purchased and installed in June 2022 and operated until mid-2025. During this period, it was regularly serviced by the distributor. The unit features two independent print stations, significantly facilitating and speeding up operation. A head replacement is required for the AEOON. We are including a PRETREAT priming device with the Aeoon printer FREE of charge! Fgedpfeyi Ak Aex Al Uoh We will assist with packaging and transport.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Fgedpjzzrutefx Al Ush Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Fsdpfx Aozu A D Eel Usgh Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Fsdjuhp Ehepfx Al Usgh

Condition: excellent (used), HB-Therm: "Flow-5" for monitoring and controlling temperature control circuits Fgsdpfx Aow D Eh Isl Ush Flow-5 available with four, six, or eight external circuits, optionally equipped with ball valves. Water-based flow meter and controller "Flow-5". This device is used to monitor and control parallel-connected temperature control circuits in the injection molding process. The "Flow-5" is available for media temperatures up to 120°C, and with four, six, eight, or 16 circuits. All media-carrying components are made of stainless steel. Flow-optimized precision cast parts and large flow cross-sections are designed to reduce pressure loss. The devices can be installed directly into the injection molding machine and connected to the mold with short lines. The version with eight circuits measures 239 × 175 × maximum 506 mm. Depending on the version, the weight ranges from 10 to 19 kilograms. During operation, the system monitors and documents flow and temperature in each mold circuit. Limit values, sensor monitoring, and an alarm system are designed to detect deviations at an early stage. Integration into higher-level systems is done in conjunction with the temperature control units or via OPC UA. Several HB-Therm flow meters and water distributors available. Condition: like new – from cleanroom production. The following versions are available: 3-way 5-way 6-way 12-way 13-way 16-way Note: Original new prices can be found in the attached documentation. I would like to pay 1/3 of the new price.