Used Film Packaging Machine for sale (72,287)

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: VD 09.16.1408, WITH SHRINK TUNNEL Commission No.: 25.150.71 Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Typical applications: Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection Fjdo Ahng Nepfx Am Eegi

Condition: used, Year of construction: 2020, Coalza RS400-DH Automatic Vertical Dry Ice Packaging Machine, 2020 Coalza RS400-DH automatic vertical form-fill-seal packaging machine, manufactured in 2020. Serial number 11431. This machine is equipped with volumetric dosing and was configured for packing dry ice. The original Coalza installation layout for this serial number shows a 10 kg dry ice bag application and a bag ejector. The take-away conveyor is indicated as customer-supplied in the original layout and is not included unless separately agreed upon. The machine forms, fills, and seals bags from roll-fed film. The model manual specifies PE and PP film. Controls include a PLC with a touchscreen and temperature-controlled sealing. Technical specifications: Manufacturer: Coalza Model: RS400-DH Serial number: 11431 Year: 2020 Application: Dry ice bagging, original layout for 10 kg bags Dosing system: Volumetric Film: PE and PP Electrical supply: 380 V, 3-phase + neutral + earth, 50 Hz Rated current: 10 A Installed power: 3.8 kW Compressed air: 6 bar; approx. 40 l/min for the basic machine, up to 90 l/min with accessories Fgjdpfx As Agq Sdem Eji Approximate dimensions: 1,342 × 1,993 × 3,048 mm (W × D × H); installation dimensions may vary RS400 series reference: bag width up to 450 mm, recommended minimum 100 mm; film roll width up to 950 mm; bag length 50–600 mm Manufacturer’s stated RS400 mechanical maximum: up to 50 bags/min; actual output depends on the product, film, and machine configuration Coalza RS400-DH, Coalza packaging machine, dry ice packaging machine, dry ice bagging machine, carbonic ice packaging machine, ice bagging machine, automatic vertical packaging machine, vertical form-fill-seal machine, VFFS packaging machine, volumetric dosing machine, 10 kg dry ice bags, industrial packaging machinery, used packaging machine.

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Fodpfxjxn Aamo Am Eogi

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Machine Connections: Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers Fodpfx Amsz Er Nve Ejgi • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel The machine is particularly suitable for tall and/or long packages.

Year of construction: 2015, condition: used, Table dimensions: 1250x800x1200mm, connected load: 4kW, length: 1000mm, width: 1850mm, height: 1600mm, with documentation, no maintenance has been carried out, an on-site inspection is possible. Fedpjz Sr N Rjfx Am Ejgi

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Fjdoyzxgfepfx Am Eegi Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Fsdpfx Aoxf Iihsm Ejgi

Condition: good (used), Description: For sale is a packaging machine from AFFELDT, model SA 05. The machine is used but remains in working condition and operates flawlessly. It is ideally suited for industrial applications, specifically for packaging products in film. Details: • Manufacturer: AFFELDT (German quality) • Model: SA 05 • Application: Film packaging / packaging process • Condition: used, fully operational • Heavy-duty industrial design This machine comes from an active production line and was used reliably in daily operations. AFFELDT machines are renowned for their durability and robust construction, built for continuous industrial use. The unit bears normal signs of use, but is technically in perfect working order. Ideal for production, warehouse, or shipping operations. —— Inspection and test run on site possible. The machine is available immediately. Fjdsy Ez Rbepfx Am Esgi

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, PRICE REDUCED: €29,000 → €25,000 (excluding VAT) – machine available immediately Resta automatic mattress packaging machine: integrated compression and decompression The Resta mattress packaging machine is an automatic packaging machine dedicated to the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with compression and then decompression of the mattress, while protecting it in a suitable film. Advantages of mattress packaging in production and distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated compression: mattresses packaged in PVC or plastic film, without manual intervention Easy decompression: the mattress returns to its normal shape in the store or at the customer's location Optimized transport: significant reduction in volume, with more space in the truck and in storage Preparation for sale: final presentation of the mattress in appropriate commercial conditions Vacuum packaging machine: protection and transport of the mattress What really changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, PVC film or plastic film, and ensures a hermetic seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatible with spring and foam mattresses Ideal when your production mixes spring and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment handles both bagged mattresses and compressible structures equally well, simplifying workshop organization. Spring mattresses: compression without damaging the springs, thanks to a progressive hydraulic system Foam mattresses: adaptation specific to the product, with rapid shape recovery after compression Compatible with PVC film and other specialized packaging films Professional sealing: hermetic closure of the film to protect the mattress during transport Industrial applications and mattress packaging processes In practice, on an industrial mattress packaging line, this Resta automatic packaging machine is integrated after the [omitted: the text stops mid-sentence]. Special feature: allows double independent packaging (two separate bags) in the same space as a standard packaging machine, thanks to two superimposed polyethylene rolls. It also allows single or customized packaging (two different rolls, automatic change according to programming). The feeding belt and detachable press also allow packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official technical specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Fjdpfx Aszmpvrom Eogi Power supply: 400V – 50Hz three-phase Available options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for removing polyethylene waste

Condition: good (used), Year of construction: 2008, Professional packaging machine from a renowned European manufacturer. Suitable, for example, for packaging catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically conveyed through the machine and shrink-wrapped. The packaged product is discharged at working height via a conveyor belt. Technical Data: - Packaging output up to 1,200 products per hour. - 220-230 V / 50-60 Hz. - Forming shoulder machine. Fgsdpfx Asx Nhbzem Eoi - Flat film of various thicknesses. - Transverse sealing seam / longitudinal back sealing seam. - Independent hot wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on castors, with locking function. Adjustment options / features on the display: - Piece and production counter. - Pressure for longitudinal sealing jaw. - Pressure for transverse sealing jaw. - Pressure for guide rollers. - Sealing time. - Temperature of sealing jaws during operation. - Temperature of sealing jaws in standby. - Film slack control. - Bag length. - Cycle start. - Locking time of counter-pressure rollers after product passage. Scope of delivery includes an operating manual with circuit diagram. The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2010, Professional packaging machine from a renowned European manufacturer. Suitable, for example, for packaging catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically conveyed through the machine and shrink-wrapped. The packaged product is discharged at working height via a conveyor belt. Technical Data: - Packaging output up to 1,200 products per hour. - 220-230 V / 50-60 Hz. - Forming shoulder machine. Fsdpfx Asx Nhqvom Eogi - Flat film of various thicknesses. - Transverse sealing seam / longitudinal back sealing seam. - Independent hot wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on castors, with locking function. Adjustment options / features on the display: - Piece and production counter. - Pressure for longitudinal sealing jaw. - Pressure for transverse sealing jaw. - Pressure for guide rollers. - Sealing time. - Temperature of sealing jaws during operation. - Temperature of sealing jaws in standby. - Film slack control. - Bag length. - Cycle start. - Locking time of counter-pressure rollers after product passage. Scope of delivery includes an operating manual with circuit diagram. The machine can be demonstrated under power.

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter Fgsdpszn Ipysfx Am Eji • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Year of construction: 2009, condition: good (used), - Fully automatic Fgjdpfx Aepu Anmom Eei - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Condition: used, Year of construction: 2002, An automatic Pfankuch collating and OPP film wrapping machine for flat products is offered. Max. film roll width: 600mm, max. film roll diameter: 250mm, film core diameter: 76mm, film thickness range: 15µm-40µm, max. production output: 100packs/min, product-dependent, top film material: polypropylene OPP/COEX/Cast, bottom film: polypropylene OPP/COEX. Dimensions: approx. 6000mm/1000mm. Documentation available. Inspection possible by arrangement. Fedpfxjzvgh Ro Am Eogi

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1755741, total length: 4,500 mm, total height: 1,800 mm, total width: 1,900 mm, input voltage: 400 V, energy consumption: 23 kWh, Industrial Film Wrapping Machine LPFK1-218 Manufacturer: Lerum Pac Maskin AB, Sweden Model: LPFK1-218 | Year: approx. 2017 Machine No.: 1755741 Industrial film wrapping machine for automatic packaging of wood products, boards and long profiles. The machine has been used at Superwood A/S and has a total operating time of less than one month. It is being sold due to changes in the production line. Technical data: Max. film width: 800 mm Adjustable conveyor speed Digital temperature control 400 V / 50 Hz, 23 kW Siemens SIMATIC HMI and PLC control Frequency inverters, CE marked Dimensions (L × W × H): approx. 4,500 × 1,880 × 1,560 mm Original documentation included, including manual, electrical and pneumatic diagrams, and spare parts lists. The machine is sold in its current condition. Important: The machine will be removed from the production line in week 52, 2026. Collection is possible from week 2, 2027. Fgsdpfo Ahnkzex Am Eji Price: EUR 35,000 excl. VAT Location: Hampen, Denmark Delivery: EXW, buyer arranges collection and transport.

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” Fodpfx Ajzvycnem Eegi -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. Fgodpoz Dk Arjfx Am Eji * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: used, Year of construction: 2017, functionality: fully functional, total length: 3,820 mm, total height: 2,105 mm, total width: 2,010 mm, type of input current: three-phase, product height (max.): 380 mm, product length (max.): 2,000 mm, input voltage: 415 V, compressed air connection: 6 bar, input current: 43 A, working height: 1,105 mm, length of welding knife: 1,370 mm, passage height: 380 mm, overall weight: 1,180 kg, power: 26.7 kW (36.30 HP), film width: 1,350 mm, input frequency: 60 Hz, year of last overhaul: 2026, space requirement width: 2,010 mm, Equipment: documentation/manual, safety light barrier, For sale is a used Saropack / SMIPACK BP1402AS strapping machine with an integrated shrink tunnel, manufactured in 2017. The machine was used in our facility, regularly maintained, and is in fully functional and ready-to-use condition. Suitable for the automatic or semi-automatic packaging and strapping of various products with shrink film. Technical data: - Manufacturer: SMIPACK S.p.A. / Saropack - Model: BP1402AS Fodjz I Sz Repfx Am Ejgi - Year of manufacture: 2017 - Serial number: 63604 - Connection: 3PH + N + PE - Voltage: 380–415 V - Frequency: 50–60 Hz - Power: 26.7 kW - Current consumption: 43 A - Sealing bar: approx. 1,370 mm - Maximum product height: approx. 380 mm - Automatic and semi-automatic operation - Motorized film unwinding - Integrated shrink tunnel - Suitable for shrink film / LDPE film Condition: Used, regularly maintained, and fully functional. Normal signs of wear and tear consistent with age and use. The machine can be inspected and demonstrated in operation by arrangement. Location: Kestenholz, Switzerland Price: EUR 22,900 (negotiable) Transport and loading by arrangement.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Fedpfxsy Anifj Am Esgi

Year of construction: 2005, condition: good (used), Finnish-made, automatic film wrapping machine with infeed and outfeed conveyors, and strapping for securing the package to a wooden pallet. Fgsdsy Uagmepfx Am Eei

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: SACMI / Pack Sud HPS20 Industrial Flowpack Packaging Machine We are offering a SACMI / Pack Sud HPS20 horizontal flowpack packaging machine, manufactured in 2021. The machine is designed for automatic packaging of products in flexible film, creating sealed packages with one longitudinal and two transverse seals. Technical Specifications Manufacturer: Pack Sud S.r.l. – SACMI Group, Italy Model: HPS20 Year of manufacture: 2021 Serial number: HPS20-21044C Machine type: Horizontal Flowpack Packaging Machine Maximum capacity: Up to 150 cycles/minute Maximum film speed: 20 metres/minute Electrical supply: 400 V / 50 Hz / 3-phase Installed power: 3 kW Required compressed air pressure: 6 bar Machine dimensions: Approx. 4,100 × 1,278 × 1,622 mm Machine weight: Approx. 850 kg The stated capacity and dimensions are based on the manufacturer's standard HPS20 specifications. Actual performance depends on the product, packaging dimensions, and machine configuration. Applications Suitable for horizontal packaging of products using flexible packaging film, including applications within the food and industrial packaging sectors, subject to product compatibility. Documentation Available Original user and maintenance manuals Electrical schematics Control panel documentation Fgodpfx Aj Afamiom Eei CE Declaration of Conformity Additional Information The machine can be offered as an individual unit. Further technical information and documentation are available upon request. For more information, please contact: SACMI HPS20, SACMI HPS 20, SACMI packaging machine, SACMI flowpack, SACMI flow wrapper, Pack Sud HPS20, Pack Sud HPS 20, PackSud HPS20, Pack Sud packaging machine, Pack Sud flowpack, HPS20-21044C, Italian packaging machinery, used SACMI machine, used Pack Sud machine, 2021 packaging machine. English – Packaging Machines: Flowpack machine, flow pack machine, flow packer, flow wrapping machine, horizontal flow wrapper, horizontal flowpack machine, horizontal packaging machine, automatic packaging machine, industrial packaging machine, wrapping machine, automatic wrapping machine, flexible packaging machine, film packaging machine, horizontal form fill seal machine, horizontal form fill and seal, HFFS machine, HFFS packaging machine, pillow pack machine, pillow packaging machine, three-side seal packaging, longitudinal sealing machine, transverse sealing machine, rotary sealing machine, heat sealing packaging machine, plastic film wrapping machine, roll-fed packaging machine, food packaging machinery, product wrapping machine, individual product packaging machine, used packaging equipment, second-hand packaging machine, pre-owned flow wrapper, packaging machinery for sale.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 26, Automatic bagging machine LAMAR SL-200 – 2015 For sale: an automatic bagging machine / packaging machine, model SL-200, manufactured by the Polish company LAMAR in 2015. The machine is designed for packaging bulk products, including pellets, fertilizers, animal feed, soil, and salt. Key parameters: Packaging capacity for pellets: approx. 5 tons/hour. Adjustable product weight per bag: 5–25 kg. Bag length adjustment: lengthening and shortening from the operator panel. Film tube: 940 mm. Technical specifications and equipment: 3-lane weighing dispenser, bag forming unit for 15 kg bags and other formats within the specified adjustment range, Fedpfx Amo Aa Duyo Esgi gusset forming unit, film sealing unit, servo motor for positioning the horizontal jaws, unit for measuring bag length on film without printing, roller perforating unit, technological platform, control cabinet, feed hopper. The machine is in very good technical condition. A video of the machine in operation can be provided. Please contact us for further information.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2021 Power: 3 kW Cushion width: up to 420 mm Infeed height: 20 mm Shipping via a freight forwarder is possible upon request. Fgedpfx Amjzpwnzj Eoi #8552-2

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 938, input voltage: 400 V, roll diameter: 310 mm, type of input current: three-phase, L.P. Packaging SFE 1100 PLC shrink-wrapping machine (sleeve wrapper) with integrated shrink tunnel, year of manufacture 2008. PLC control, 400V/50Hz + N, 22 kW installed power. Max. film roll diameter 310 mm. Complete with conveyor belt, film holder, and protective cover. From an active printing company, available for collection in Ghent. Fgedpfj Ahwzcox Am Eoi

Condition: ready for operation (used), Year of construction: 1990, operating hours: 160,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Fgedpjz Hi Iljfx Am Eoi Further technical specifications, photographs and additional information are available upon request.